Articles about this company:
More air, less noise (1st September 2008)
Energy saving High Thrust Jets from Meech Air Technology provide a high power blast of air, while reducing compressor demand and lowering noise levels.
From Plant process control
Static boost to quality (1st September 2008)
In Mould Labelling is becoming more popular, with companies adopting the process as a clean and effective way of decorating injection moulded parts, for example in consumer electronics. It is the process whereby a label
From Production engineering
New non-contact web cleaning system (27th June 2008)
The new ShearClean incorporates well-established aerodynamic and fluid dynamic technologies to provide end-users with a system that achieves a high level of cleaning efficiency without physical contact...
From Newsletter Stories
Cool down with Meech cabinet coolers this summer (30th May 2008)
The Meech Cabinet Cooler has always chilled cabinets and cooled machine controls while preventing dust ingress and contamination. But now, thanks to its innovative design and the development of the Cabinet Cooler System, your company can also make important energy savings...
Cooling role (1st May 2008)
Stainless steel vortex tubes from Meech Air Technology are said to be suitable for all spot cooling applications. They convert compressed air into two airflows, one extremely cold and one extremely hot.
Curtain time (1st May 2008)
Providing a replacement for drilled or slotted lengths of pipe for wide area blow-off and drying applications is Meech International's energy saving Air Curtain. Pipes can be inefficient, wasting large volumes of compr
From Energy management
Cool down with Meech cabinet coolers this summer (30th April 2008)
The Meech Cabinet Cooler has always chilled cabinets and cooled machine controls while preventing dust ingress and contamination. But now your company can also make important energy savings...
Meech’s JetStream solves challenging drying problems (26th March 2008)
Engineers at Meech International enjoy solving challenging drying applications. When they were approached by a manufacturer of extruded polystyrene foam insulation boards, they were told that every system used so far had failed to solve their particular problem. What they needed was a powerful and effective drying system that could completely remove water from the insulation boards before they were sent to the trimming/cutting machine. The arrangement of the Meech JetStream manifolds, together with its powerful drying action ensured that the boards were completely dry before going on to the next stage of the process.
Web clean-up (1st March 2008)
Following extensive trials, an Australian producer of recycled paper and associated products has invested in a Series 1000 Web Cleaning System from Meech International. It will be installed on a printing press.
TechNova chooses Meech (28th February 2008)
With the purchase and installation of two web cleaning manifolds from Meech International, TechNova has now further improved quality and reduced rejection rates on its production line...
Using Explosion-proof Static Control Bars in Hazardous Situations (24th January 2008)
Meech International helps Alupa achieve a better gloss finish...
Meech International helps Alupa achieve a better gloss finish with its range of its range of Ex products. The main advantage of these ATEX certified bars is that they provide highly effective long-range ionisation without the need for air assistance...
Major order for Meech’s Series 1000 Web Cleaner (10th December 2007)
Meech has announced a major order for its Series 1000 Web Cleaning System. Following extensive trials, an Australian producer of recycled paper and associated products has invested in a Meech Web Cleaning system to be installed on a printing press...
Metallised labels: no problem (22nd November 2007)
Specialist in the production of wet-glue and metallised labels for the brewing industry, Darley is always looking to introduce new products and solutions, which means at times the printing process becomes challenging...
Less air more savings (1st November 2007)
All industrial companies are looking to save energy costs.
From News
Less compressed air – more energy savings (26th October 2007)
All industrial companies are looking to save energy costs. However, this has to be balanced with maintaining productivity and adhering to health and safety regulations...
Eliminate dust contamination on your printing applications (17th September 2007)
Engineers from static control and surface cleaning specialists Meech have joined forces with web flexographic printing presses manufacturer Edale, to provide a machine that can deliver defect-free printing, without compromising the design or printing function...
Energy-saving amplifers (1st September 2007)
Air Amplifers from Meech International are designed to provide large airflows while consuming minimal volumes of compressed air. The amplifiers will provide lower running costs, cutting energy bills. They are suitable
Replace compressed air and reduce your carbon footprint (20th August 2007)
Throughout manufacturing industry, compressed air is used for a wide range of tasks. “However, it can be costly and inefficient, particularly if used for the wrong application.” says Adam Battrick, international product manager for the JetStream air knife system from Meech International...
Keep cabinets and controls cool and clean (16th July 2007)
The stainless steel Cabinet Cooler Systems www.meech.com from Meech International is an alternative to expensive and bulky refrigerant cooling systems...
Hands-free ionisation (1st May 2007)
Meech International announced the launch of its Model 200 proximity sensor switching system for use with its Series 200 range of ionising nozzles at Total Processing and Packaging this year.
For static (1st November 2006)
The latest static generator from Meech International can be used in either constant voltage or constant current mode to generate a controlled level of static charge that will create a temporary bond between materials, one of
Free blowgun for new Noise Regs compliance (30th May 2006)
A new EU Noise Directive has become UK Law, affecting thousands of workers throughout UK manufacturing. The main points of the new Directive are lowering the levels of noise at which protection must be provided, requiring employers to offer more hear
Eliminate packaging static (27th April 2006)
Watford-based A.S.P. Packaging specialises in the conversion of flexible packaging films for the fresh produce, hot bread, bakery and prepared sandwich markets - and it uses Meech anti-static solutions to keep production running smoothly.
Meech solves sticky situation (23rd March 2006)
Meech Static Eliminators has solved a sticky static situation for Technibond Ltd., manufacturers of double sided adhesive tapes & self-adhesive sealants.
For static control (1st March 2006)
Available from Meech, the 986 DC feedback system automatically optimises static charge removal by sensing the residual charge on the target material and reacting to it.
Jet drying for food processors (17th February 2006)
Suppliers of premium prepared vegetables to UK supermarkets are now able to improve production processes with a drying system from Meech Air Technology.
ALARMED FOR SAFETY (1st September 2005)
The Meech Model 986 Feedback system includes a safety alarm that, the company says, is not seen on other systems.
What no compressed air! (1st September 2004)
Adam Battrick of Meech Static Eliminators looks at traditional drying applications and highlights how a fresh approach can reduce compressed air use and so reduce manufacturing costs
Air solution (1st July 2004)
The Jet Stream system from Meech is a cost effective surface cleaning solution that works by blowing high pressure ionised air over items to be cleaned.
CLEANROOM IONISING BLOWER (1st March 2004)
The Meech 220ss cleanroom ionising blower has been developed specifically to meet the stringent environmental criteria defined for high specification cleanrooms and the demanding requirements for ionisation within the electronics industry. The 220ss
Costs slashed (1st November 2003)
Meech Air Technology claims its Jet Stream fan-driven air knife system can eliminate the need for compressed air in drying applications, giving significant energy savings.
Static: simple solution (1st September 2003)
Meech Static Eliminators has solved a static problem at Tetrapak MPSs new bottle making plant in Essex. To keep production running smoothly, even when there is a temporary lull in requirements, Tetrapaks client, Arla Foods, allows the company to bag
