Home >Plant, Process & Control>Boilers and burners
PRODUCTS & SERVICES

1/9     (1 to 20 of 165)

31 July 2018

The all-new gas-fired, vertical spiral-rib tubeless steam boiler from Fulton, the VSRT, is the first range to emerge from the company’s new ‘PURE Technology’ approach, an initiative that has resulted in a design that is durable, long-lasting and which boasts high efficiencies and ultra-low NOx emissions as standard.

[Read More]


24 July 2018

Hoval has introduced two new models to its range of high efficiency, low NOx steel shell boilers; the Max-3 E and the Max-3 condens E.

[Read More]


19 July 2018

A new guide from Spirax Sarco is designed to help boost efficiency right from the heart of the boilerhouse.

[Read More]


12 July 2018

While many steam boilers are extremely robust, they are often inefficient because they are based on old or ageing technology. In an effort to make them more efficient, some manufacturers fit modulating burners and bolt on economisers in an attempt to improve both steam output and efficiency. According to Fulton, this isn’t enough.

[Read More]


12 July 2018

LAMTEC’s CMS Combustion Management System is based on an innovative modular architecture and offers a high degree of flexibility.

[Read More]


12 July 2018

Riello has donated an RL34 oil burner to the Internal Fire Museum in Cardigan for use in the first of its steam halls. The burner is fitted to a Beel VFB boiler donated by Cochran UK.

[Read More]


20 June 2018

Riello has donated an RL34 oil burner to the Internal Fire Museum in Cardigan, Wales, for use in the first of its steam halls. The burner is fitted to a Beel VFB boiler donated by Cochran UK.

[Read More]


22 May 2018

When a global engineering firm’s factory boiler system started to leak and become costly to run and maintain, the company enrolled the expertise of Independent Heating & Cooling (IHC) to address the issue within an eight-week window.

[Read More]


 border=
24 April 2018

If your site runs any sort of boiler plant, hot water boilers, steam shell and tube boilers, water tube boilers, steam generators, or coil boilers, a Senior Managers' Conference organised by the CEA (Combustion Engineering Association) may be of interest.

[Read More]


09 April 2018

Building on its RX range of premix packaged burners that have outputs to 1500kW, Riello has extended the offering with variants up to a 3MW model, whilst still achieving NOx levels of less than 30mg/kWh and low noise output.

[Read More]


20 June 2018

To improve energy efficiency and meet environmental regulatory requirements for small and midsize boiler markets, Emerson has introduced the Rosemount CX1100 in-situ oxygen analyser, a high-performance, zirconia cell-based combustion control system.

[Read More]


23 March 2018

CO Control is now possible using a single in-situ flue gas probe and analyser.

[Read More]


13 March 2018

Hoval has introduced two new models to its range of high efficiency, low NOx steel shell boilers; the Max-3 E and the Max-3 condens E. Each model is available in four sizes in outputs up to 6800kW in gas and dual fuel options.

[Read More]


Link
01 March 2018

Spirax Sarco is urging companies who rely on processes driven by steam to manage their condensate more effectively. A new white paper details the potential cost and productivity benefits on offer.

[Read More]


22 February 2018

Riello has introduced low NOx (<80mg/kWh) ‘blue flame' versions to all sizes of its RS range of burners. This is achieved through the use of a low NOx combustion head to ensure emissions conforming to EN 676 Class 3 in capacities from 3600 to 6250kW.

[Read More]


22 January 2018

JBC designed, installed, modified and commissioned an upgrade from an existing 6000 digital burner modulation system to an ‘Ecosafe’ 6009 simultaneous firing system. The upgrade increased the amount of biogas burned by 25%, saving the company £30k per year!.

[Read More]


06 December 2017

The famously distinctive bright green shell of one of CFB Boilers’ 4VT Steam Boiler has been transformed with a copper overskin.

[Read More]


07 December 2017

Stokvis Energy Systems has spent over a year generating hundreds of 3D models and Product Data Sheets (PDS) for its most popular product lines, making the manufacturer’s BIM offering Level 2 compliant and compatible with the most popular platforms.

[Read More]


27 November 2017

Hoval has introduced two new models to its high efficiency, low NOx steel shell boiler range – the Max-3 E and the Max-3 condens E. Each model is available in four sizes in outputs to 6800kW in gas and dual fuel options. Key features include return inlets with injection effect to ensure return water is heated evenly, avoiding condensation on the flue surface and extending service life.

[Read More]


21 November 2017

With the Medium Combustion Plant Directive (MCPD) fast approaching, Kevin Houlden, industrial and commercial specialist at Calor, advises on the steps that operators can take to upgrade their existing boiler plant

[Read More]


1/9     (1 to 20 of 165)

FEATURES

1/2     (1 to 20 of 25)

26 April 2018

Boilerhouse managers and operators are constantly battling with rising energy prices. With pressure to remain competitive and reduce costs, the search to combat energy consumption is top of the wish list. Chris Coleman, boilerhouse national specialist at Spirax Sarco, argues that truly efficient condensate recovery can boost productivity and improve regulation, at a much lower cost to steam users than we might imagine

[Read More]


23 April 2018

Chris Horsley, managing director of Babcock Wanson explains the efficiency improvements and energy savings that are achievable by using thermal fluid heating systems with integral economisers, and questions why more companies aren't reaping the benefits of this proven technology

[Read More]


30 May 2017

The Combustion Engineering Association has introduced 'I-GAS', a new qualification for maintenance and gas fitters working in industry. David Kilpatrick, director of the CEA, explains more

[Read More]


30 March 2017

Industrial boilers can be an expensive item of machinery, and of course, fundamental to keeping plants operational. Given these facts, it’s clear that ensuring that their lifespan is extended as much as possible and that unplanned outages are minimised is essential. It real is a case of 'prevention is better than cure', according to Neil Ford, aftermarket manager at Green’s

[Read More]


13 March 2017

If you’re currently, or will be in the future, looking to invest in an industrial boiler then these tips from Stephen Fleming, sales project engineer at Byworth Boilers, may help your decision-making process

[Read More]


17 March 2017

Chris Horsley, managing director of Babcock Wanson, explains the important role that heating plays in the supply and management of bitumen, and the financial and environmental benefits of using thermal fluid heating

[Read More]


06 September 2016

Lower total life costs are among a number of benefits delivered by liquefied petroleum gas (LPG) heating solutions, explains Gregor Dalgleish, commercial sales manager at Calor

[Read More]


30 March 2016

In any workplace, managers have a duty to evaluate the risks associated with that setting and, if there is a boiler installation on site, they are legally bound to keep it working correctly and safely at all times. Chris Coleman, marketing product manager – condensate handling & customer training at Spirax Sarco, looks at some of the key requirements of a boiler house risk assessment and explains how training plays a vital role

[Read More]


24 March 2016

Huddersfield-based craft beer specialist, Magic Rock Brewing, has installed a 100hsp 4VT steam boiler from CFB Boilers to generate steam for a number of vital steam-powered processes. The energy-saving boiler, which comes with future-proof steam capacity, is already helping the brewery towards its aim of quadrupling output within two years

[Read More]


24 March 2016

With the European Commission looking to encourage emissions reductions in line with its 2050 targets, Matthew Walton, contracts manager at Bosch Commercial and Industrial, explains why it is vital for plant operators and plant managers to prepare ahead of the fast approaching implementation of the Medium Combustion Plant Directive (MCPD)

[Read More]


25 November 2015

Efficient energy management in boilerhouses usually concentrates on fireside issues such as fuels and burners, but waterside conditions are every bit as important, as Veolia explains

[Read More]


20 August 2015

Factories and industrial buildings can be complex to manage and will have areas with different heating and hot water requirements. A thorough review of the boilers and water heating equipment can soon show how inefficient products may be wasting energy and money, as Hamworthy Heating explains

[Read More]


16 July 2015

Thermal fluid heaters can be used as a source of heat for industrial processes where high process temperatures are required and, according to Doug Howarth, sales and marketing manager of Fulton, there are circumstances, especially where low running costs is a requirement, where they are more suitable for heat transfer than steam systems

[Read More]


20 March 2015

Plastics recycling firm Jayplas (J&A Young) has a philosophy to invest in technology that enables the company's plants to operate in an efficient and environmental way. A Babcock Wanson HEB 420 hot water boiler and heat exchanger with efficiency to 96.2% is playing its part at the company's latest recycling facility in Loughborough

[Read More]


17 February 2015

Industrial process heating applications that require steam have specific system requirements which can differ significantly from one to the next. Here Rob Brown, technical manager for Industrial Boiler Plants at Bosch Commercial and Industrial Heating, explains why he believes there is a need for each plant to reap the benefits of a bespoke steam boiler system design

[Read More]


08 December 2014

Modern pressure jet burners provide control features that help to optimise energy efficiency and minimise emissions. Bernard Dawson, technical director of Riello offers some tips on how to take advantage of them

[Read More]


03 November 2014

The idea that keeping old heat raising equipment up and running will save you money is often a false economy, costing you dearly in fuel, maintenance and operational expenditure. Investing in modern heat raising systems may well pay off relatively quickly, explains Chris Horsley, MD of Babcock Wanson

[Read More]


02 September 2014

A three stage, reverse flow regenerated ion exchange demineralisation system from Veolia Water Technologies has helped slash boiler downtime at the South East London Combined Heat and Power facility (SELCHP), an energy from waste (EFW) facility in Deptford, London

[Read More]


21 May 2014

Byworth Boilers, independent manufacturer of steam and hot water boiler services, was one of the first companies to recognise the potential of providing a boiler hire service. That was over 30 years ago. Today the company has a fleet of more than 100 modern mobile, de-mountable, static and containerised boilers available for long or short term hire

[Read More]


09 May 2014

While many people who have the responsibility for looking after the boilerhouse are under pressure to keep the boilers fully operational, some are often unaware of the significant health and safety issues involved. Here, David Kilpatrick, director of the Combustion Engineering Association, looks at the role of automation in the boiler house.

[Read More]


1/2     (1 to 20 of 25)

SPONSORED CONTENT

1/1     (1 to 15 of 15)

04 May 2016

• Blowdown Vessels Blowdown vessels are designed to reduce the pressure of the blowdown discharge from the boiler to atmospheric pressure, and also reduces the blowdown discharge to drain to acceptable temperatures for compliance to water bylaws.

[Read More]


28 April 2016

The Fulton VMP (vertical multiport boiler) incorporate a series of heavy-walled large-diameter schedule 80 flue pipes welded to the top and bottom heads in the pressure vessel; these pipes are surrounded by water.

[Read More]


13 May 2015

Nationwide Boiler Hire from the Rental Experts. A complete boiler rental service is provided by Carrier Rental Systems. We are capable of dealing with any temporary or long term application. Call us today for a fast, competitive boiler hire quotation.

[Read More]


04 May 2016

The J Series is designed to meet the steam raising requirements for process steam across industrial, pharmaceutical, medical, food and drinks industry applications.

[Read More]


04 May 2016

Electropack is Fulton’s versatile seven-model range designed for steam loads between 29 and 160kg/h.

[Read More]


23 September 2013

Fire tube steam boiler 1 000 - 18 000 kg/h, 180 °C | Yorkshireman The Yorkshireman is a traditional three pass wetback shell steam boiler, and is ideal for heavy continuous workload.

[Read More]


19 July 2013

KING’S BOILER HIRE tick all the boxes when it comes to helping farmers and growers meet their green credentials and generate electricity by anaerobic digestion process.

[Read More]


28 April 2016

Fulton’s FB range can be configured for gas, oil or dual-fuel installations and for either steam or hot water applications.

[Read More]


04 May 2016

Skid-mounted packaged steam boiler systems are factory built on a bespoke basis.

[Read More]


19 July 2013

KING’S TANK HIRE division supplies Bunded Fuel Tanks, Water Tanks, Boiler Feed Tanks, Condense Tanks, Blow Down Tanks/Vessels on a temporary basis throughout the UK.

[Read More]


02 June 2015

ICS Cool Energy offer a powerful and reliable boiler hire packages.

[Read More]


04 May 2016

Thermal fluid heaters are suitable for process applications requiring temperatures 32°F or above 350°F.

[Read More]


04 May 2016

A compact high efficiency electric steam boiler, designed for applications with small steam demands, such as laboratories, clothing industries, or food processing.

[Read More]


19 July 2013

KING’S BOILER HIRE are the UK’s largest providers of temporary industrial boiler plant.

[Read More]


28 April 2016

Developed in response to customer demand for higher capacities than the 1565 kg/h maximum for its vertical range, the nine-model RB/RBC range (with outputs ranging from 957 to 4787 kg/h) can be specified with matched multi-stage oil, modulating gas or dual-fuel burners as standard, with other burners available on request.

[Read More]


1/1     (1 to 15 of 15)

VIDEO OF THE MONTH