Home>Plant, Process & Control>Sensors and instrumentation>Portable combination measuring instrument
ARTICLE

Portable combination measuring instrument

22 June 2017

The Yokogawa DL350 ScopeCorder is a fully portable measuring instrument available for capturing, displaying, recording and analysing a wide variety of electrical and physical parameters in industry sectors including automotive, electronics, energy, transport and mechatronics. 

The DL350 combines the features of a general-purpose oscilloscope and those of a high-performance data acquisition recorder in a single, portable instrument. Benefits are said to include exceptionally high levels of precision and accuracy to field measurements, isolated inputs for measurements at high voltage levels, and long-memory capabilities that allow long-term recording for many hours or even days.

Another key feature of the DL350 ScopeCorder is its plug-in modularity, which allows it to be configured to suit a variety of user applications. Whether carrying out straightforward high-precision voltage measurements or handling a blend of signals coming from such things as current probes, temperature sensors, strain gauges, accelerometers and serial buses, the DL350 can deliver, without extra boxes or cables.

This flexible input capability is achieved by incorporating two slots which are populated with any of 18 different types of user-swappable input modules. This means, for example, that four isolated 16-bit voltage inputs can be measured at speeds of one megasample per second (MS/s) alongside 16 temperatures or two separate CAN or LIN buses each containing 60 signals. Changing a single module enables measurement at 100MS/s with 12 bits and 1kV of isolation. Meanwhile there are 16 logic inputs always available, with even more available by swapping a further module.

Among other modules are AC measurements using an RMS module in real time and a mathematics channel for signal processing and analysis after the recording is finished.

The DL350 offers compatibility with many existing ScopeCorder input modules and is said to provide a potential cost saving to existing users.

For those who are more familiar with chart recorders than with long-memory oscilloscopes, the DL350 offers a choice of operating modes. Recorder mode is suitable for long-term, continuous recording for a specific duration and where the sampling interval is specified. A set-up wizard can be used in this mode to guide the operator quickly through the entire set-up process. 

Scope mode allows the DL350 to be used just like an oscilloscope with all the associated benefits, including comprehensive triggering and flexible memory use. Using the history memory enables up to 1000 separate triggered acquisitions to be captured to the internal memory so that the causes and effects of abnormalities can be carefully analysed.

Up to 5 Gpoints of data per module can be recorded directly to an SD card. This means that the DL350 can be used for continuous recording up to 50 days. For high-speed signals, up to 100 Mpoints per module of internal memory is available to capture fast transients.

A high-resolution, high-speed sampling module provides individually isolated 12-bit, 100 MS/s inputs, which can precisely measure and record transient waveforms (superimposed on inverter outputs, for example) and the edges of control signals.

An 8.4-inch resistive touch screen has been adopted to deliver noise-free performance. In environments with the highest levels of electrical noise such as motors and inverters, measurement precision is maintained whilst enabling the unit to be operated using gloved hands or a stylus. Even when the backlight is switched off, and the touch screen is inactive, the user still has access to the START/STOP, manual trigger and data saving keys. There is also a built-in instruction manual.

The user has a choice of a simple level trigger or enhanced triggers on such things as pulse width, waveform period and across multiple channels. For example, the wave window trigger is ideal for AC power-line monitoring, and enables voltage sags, surges, spikes, phase shifts or drop-outs to be easily captured (available for 40 to 1000Hz waveforms).

A DL350 can be left unattended with the captured waveform automatically saved to a file, or a notification email sent if and when it triggers.

The DL350 is first and foremost a field tool. However, it has the functionality users expect in a bench instrument. The sampling clock, trigger and start/stop controls are all available as external signals, so that a rotary angle encoder or degree wheel, for example, can be used as the sample clock to analyse engine rotation and performance.

 
OTHER ARTICLES IN THIS SECTION
FEATURED SUPPLIERS
 
TWITTER FEED