Meech International Ltd, Engineers'kit

ipesearch.com

Click to visit http://motordemo.eriks.co.uk/control_main_form/control_main_form.php


	What next? Request further Information visit web site Send to friend Meech International Ltd company's profile

Click to visit www.maintenanceuk-expo.com

Engineers'kit
May 1st 2009

Improving portability and practicality,Meech International, has packaged its main 900 Series test and measurement tools into an engineers' test kit.

The engineers' test kit comprises the Meech 983v2 Static Locator and the 984v2 Ion Sensor housed in a carry case. The kit will assist engineers/operators in diagnosing static related issues and with monitoring the performance of their ionising equipment.

More articles from Meech International Ltd:

Dual functionality in a single device (1st November 2011)

Providing reliable dual functionality, the Echotel Model 962 from Magnatrol offers two setpoints on the same transducer, a tip sensitive lower gap and a special flowthrough upper gap.

From Plant process control

Web cleaner (1st January 2009)

The Series 1000 Web Cleaner from Meech International is used in plastic bag manufacture to remove waste particles, or chad, after the die cutting process.

From Production engineering

Stopping static to improve film (1st November 2008)

Static is a problem in film production and high static charges can be generated, particularly at the stretching and winding stages. This was the problem encountered by the Dupont Teijin Films Foshan, China, where a ra

From Plant process control

Dries efficiently (1st November 2008)

In rolled and strip steel production, where the cost of drying steel using compressed air delivered through nozzles can be high, a JetStream air knife system from Meech International offers an alternative.

From Plant process control

Guns lower bills (1st November 2008)

Meech Air Technology says it can reduce energy bills by lowering compressed air usage with a combination of its energy saving safety nozzles and blowguns. The company says the lightweight, ergonomically designed blowgun

From Plant process control

A little goes a long way (1st November 2008)

Although many bigger companies have responded to the challenge of the high energy cost of compressed air, smaller companies in the main have not even though the potential savings are large

From Plant process control

More air, less noise (1st September 2008)

Energy saving High Thrust Jets from Meech Air Technology provide a high power blast of air, while reducing compressor demand and lowering noise levels.

From Plant process control

Static boost to quality (1st September 2008)

In Mould Labelling is becoming more popular, with companies adopting the process as a clean and effective way of decorating injection moulded parts, for example in consumer electronics. It is the process whereby a label

From Production engineering

New non-contact web cleaning system (27th June 2008)

The new ShearClean incorporates well-established aerodynamic and fluid dynamic technologies to provide end-users with a system that achieves a high level of cleaning efficiency without physical contact...

From Newsletter Stories

Cool down with Meech cabinet coolers this summer (30th May 2008)

The Meech Cabinet Cooler has always chilled cabinets and cooled machine controls while preventing dust ingress and contamination. But now, thanks to its innovative design and the development of the Cabinet Cooler System, your company can also make important energy savings...

From Newsletter Stories

Cooling role (1st May 2008)

Stainless steel vortex tubes from Meech Air Technology are said to be suitable for all spot cooling applications. They convert compressed air into two airflows, one extremely cold and one extremely hot.

From Plant process control

Curtain time (1st May 2008)

Providing a replacement for drilled or slotted lengths of pipe for wide area blow-off and drying applications is Meech International's energy saving Air Curtain. Pipes can be inefficient, wasting large volumes of compr

From Energy management

Cool down with Meech cabinet coolers this summer (30th April 2008)

The Meech Cabinet Cooler has always chilled cabinets and cooled machine controls while preventing dust ingress and contamination. But now your company can also make important energy savings...

From Newsletter Stories

Meech’s JetStream solves challenging drying problems (26th March 2008)

Engineers at Meech International enjoy solving challenging drying applications. When they were approached by a manufacturer of extruded polystyrene foam insulation boards, they were told that every system used so far had failed to solve their particular problem. What they needed was a powerful and effective drying system that could completely remove water from the insulation boards before they were sent to the trimming/cutting machine. The arrangement of the Meech JetStream manifolds, together with its powerful drying action ensured that the boards were completely dry before going on to the next stage of the process.

From Newsletter Stories

Web clean-up (1st March 2008)

Following extensive trials, an Australian producer of recycled paper and associated products has invested in a Series 1000 Web Cleaning System from Meech International. It will be installed on a printing press.

From Production engineering

TechNova chooses Meech (28th February 2008)

With the purchase and installation of two web cleaning manifolds from Meech International, TechNova has now further improved quality and reduced rejection rates on its production line...

From Newsletter Stories

Using Explosion-proof Static Control Bars in Hazardous Situations (24th January 2008)

Meech International helps Alupa achieve a better gloss finish...

From Newsletter Stories

Using Explosion-proof Static Control Bars in Hazardous Situations (24th January 2008)

Meech International helps Alupa achieve a better gloss finish with its range of its range of Ex products. The main advantage of these ATEX certified bars is that they provide highly effective long-range ionisation without the need for air assistance...

From Newsletter Stories

Major order for Meech’s Series 1000 Web Cleaner (10th December 2007)

Meech has announced a major order for its Series 1000 Web Cleaning System. Following extensive trials, an Australian producer of recycled paper and associated products has invested in a Meech Web Cleaning system to be installed on a printing press...

From Newsletter Stories

Metallised labels: no problem (22nd November 2007)

Specialist in the production of wet-glue and metallised labels for the brewing industry, Darley is always looking to introduce new products and solutions, which means at times the printing process becomes challenging...

From Newsletter Stories

Less air more savings (1st November 2007)

All industrial companies are looking to save energy costs.

From News

Less compressed air – more energy savings (26th October 2007)

All industrial companies are looking to save energy costs. However, this has to be balanced with maintaining productivity and adhering to health and safety regulations...

From Newsletter Stories

Eliminate dust contamination on your printing applications (17th September 2007)

Engineers from static control and surface cleaning specialists Meech have joined forces with web flexographic printing presses manufacturer Edale, to provide a machine that can deliver defect-free printing, without compromising the design or printing function...

From Newsletter Stories

Energy-saving amplifers (1st September 2007)

Air Amplifers from Meech International are designed to provide large airflows while consuming minimal volumes of compressed air. The amplifiers will provide lower running costs, cutting energy bills. They are suitable

From Energy management

Replace compressed air and reduce your carbon footprint (20th August 2007)

Throughout manufacturing industry, compressed air is used for a wide range of tasks. “However, it can be costly and inefficient, particularly if used for the wrong application.” says Adam Battrick, international product manager for the JetStream air knife system from Meech International...

From Newsletter Stories

Keep cabinets and controls cool and clean (16th July 2007)

The stainless steel Cabinet Cooler Systems www.meech.com from Meech International is an alternative to expensive and bulky refrigerant cooling systems...

From Newsletter Stories

Hands-free ionisation (1st May 2007)

Meech International announced the launch of its Model 200 proximity sensor switching system for use with its Series 200 range of ionising nozzles at Total Processing and Packaging this year.

From Energy management

For static (1st November 2006)

The latest static generator from Meech International can be used in either constant voltage or constant current mode to generate a controlled level of static charge that will create a temporary bond between materials, one of

From Production engineering

Free blowgun for new Noise Regs compliance (30th May 2006)

A new EU Noise Directive has become UK Law, affecting thousands of workers throughout UK manufacturing. The main points of the new Directive are lowering the levels of noise at which protection must be provided, requiring employers to offer more hear

From Newsletter Stories

Eliminate packaging static (27th April 2006)

Watford-based A.S.P. Packaging specialises in the conversion of flexible packaging films for the fresh produce, hot bread, bakery and prepared sandwich markets - and it uses Meech anti-static solutions to keep production running smoothly.