Cuts hot water costs July 1st 2007 Two Spirax Sarco
EasiHeat Engineered
Systems are helping
Wadworth Brewery use
8.2% less energy to heat
its hot water. Replacing
shell-and-tube calorifiers,
the new systems have
also cut maintenance at
the Wiltshire-based
brewery, which suffers
rapid equipment scaling
because of the local
hard water.
One Spirax Sarco
EasiHeat steam-to-hot
water heat exchanger
units general-purpose
hot water throughout the
brewery, while the second
heats the water further to
supply the cask washers.
Descaling has also been
reduced from 12-man-days
per year to about 3. The
brewery is also saving
money on the acid used for
descaling although it's too
early to put as figure on it.
Spirax Sarco fitted each
EasiHeat with a differential
pressure switch that warns
Wadworth personnel when
the heat exchangers are
starting to fur up. This
enables the systems to be
kept at peak efficiency. More articles from Spirax Sarco Ltd: |