Micronics Ltd, Meter mix

ipesearch.com

Click to visit http://198.170.88.123/advmail/atlasCopco/healthcheck/index.html


	What next? Request further Information visit web site Send to friend Micronics Ltd company's profile

Click here to visit
sponsor's
website

Click to visit http://198.170.88.123/advmail/atlasCopco/6302_completecare_03-09/compcare03-09.html

Click to visit http://www.theenergyevent.com/

Click to visit sponsors web site

Click to visit http://www.healthandsafetyevents.co.uk

Click to visit sponsors web site

Click to visit http://www.domnickhunter.com/

Click to visit http://www.theenergyevent.com/

Click here for the latest compressed air news !

Meter mix
May 1st 2006

Combining the U100 Clamp-On Flow meter from Micronics with Aquametro's Calec ST can provide cost effective energy measurement.

Custody Transfer meters require immersion temperature sensors, however, for monitoring and general energy management applications, Clamp-On sensors can be used, providing a noninvasive system. Optional bidirectional energy measurement (BDE) enables energy in two-pipe systems used for heating and cooling with one direction of flow to be measured.

More articles from Micronics Ltd:

Checks on flow (1st May 2009)

The new Portaflow - PF330 and PF220 instruments from Micronics enable the user to establish what's flowing where in a process or to monitor energy flow or water consumption.

From Energy management

Easy-to-use (1st September 2008)

Process flows and hot or chilled water services are major areas of energy consumption in processes and building services and the first step in controlling and managing them is to identify what is being used and where.

From Plant process control

Catalogue details latest clamp-on meters (1st July 2008)

Anew short-form catalogue from Micronics, Flow:watch, has details of the company's fixed 'clamp-on' meters. These are based on noninvasive, ultrasonic technology and are said to offer a cost-effective alternative to co

From Energy management

Clamp-on meter aids filter sizing (1st July 2008)

Sizing water filters and establishing what's flowing where on existing water supplies can be a difficult task; Springhill Water Services in West Yorkshire has found it easier using clamp-on flow meters from Micronics.

From Plant process control

Monitoring wastewater flow rates and demand (1st May 2008)

Scottish Water Scientific Services in Dundee are undertaking surveys of 111 treatment works sites to establish current infrastructure capacity. They are using Micronics PDFM IV portable instruments to monitor wastewater

From Energy management

Getting a measure of milk wastage (1st November 2007)

An ultrasonic, non-contact open channel flow measurement system from Micronics is providing a cost-effective solution for a dairy processing site in Gloucestershire, helping it to reduce both milk wastage and costs

From Energy management

Measure and manage energy (1st July 2007)

Every manager knows that you need to be able to measure a resource to manage it effectively and thermal - hot or chilled water energy is no different.

From Energy management

Take-off for metering (1st March 2007)

Providers of clamp-on, noninvasive, thermal metering solutions, Ranger & Micronics are fulfiling the heat measurement requirements of BAA's - Terminal 5 heat.

In response to BAA's specification for clamp-on ultra sonic heat

From Energy management

Meters for all markets (1st January 2007)

Micronics is celebrating its 21st anniversary by toasting increasing demand from global markets for its meter range.

The company has a comprehensive range of 'Clamp- On' ultrasonic Liquid flow, Heat and Energy Flow meters fo

From Energy management

Flow meter leads to savings (1st July 2006)

Use of a Micronics Portaflow 300 portable flow meter to measure actual flow rates on a 75kW motor pump circuit in a process application resulted in replacement of the pump with a smaller 11kW unit and major savings for the company. Annual energy cons

From Energy management

QUALITY BOOSTED BY FLOW METERS (1st September 2005)

Three DFM-IV ultrasonic flow meters from Micronics have been installed at the Plasticomnium automotive plant in Derby as part of a project to improve the performance of its spray booth plant.

From Plant process control

Clamp-on meters boost energy use information (1st May 2005)

Clamp-on heat meters from Micronics are improving energy efficiency and monitoring for Luton Borough Council.

From Energy management

Flowmeter leads to savings (1st March 2005)

Measurements provided by a Micronics portable flow meter have led to a 75kW motor pump circuit in a process application being replaced by a smaller 11kW unit, reducing annual energy consumption from £5698 to £926.

From Plant process control