Nu-Star Material Handling Ltd, Saves floorspace, increases shop-floor productivity

ipesearch.com

Click to visit http://www.eriks.co.uk/mtd/index.asp


	What next? Request further Information visit web site Send to friend Nu-Star Material Handling Ltd company's profile

Click here to visit
sponsor's
website

Click to visit http://www.healthandsafetyevents.co.uk

Click to visit http://www.theenergyevent.com/

Click to visit sponsors web site

Click here for the latest compressed air news !

Saves floorspace, increases shop-floor productivity
September 1st 2007

Powerscreen International has taken delivery of its first Nu-Star Super Pusher at its manufacturing facility in Dungannon, Northern Ireland in addition to the existing two Power Pushers in use on the site. As a result the floor space required for screen box assembly has been reduced by 664m2, this has been used to increase production. The Super Pusher is more manoeuvrable and requires much less aisle way and turning circle space compared to fork lifts or full sized ride-on tugs. It can be kept available in the area and used to move the screen boxes through the assembly area and outside for transport to final assembly.

The Nu-Star Pusher and Super Pusher combined with carrier bogies are a safe and efficient means of moving major components through sub and final assembly processes. They require less floor space than fork lift trucks, and are more flexible than cranes.

More articles from Nu-Star Material Handling Ltd:

Rollalong rolls out its pusher fleet (1st March 2009)

Rollalong relies on a fleet of Nu-Star Power Pushers to move modular buildings and accommodation units at its Dorset site.

From Health safety welfare

Pushing power (1st September 2008)

Deva Hawarden Board and Display, a paper and board converter and laminator to the packaging & display industry has taken delivery of a second Nu- Star Power Pusher for its manufacturing site in Flintshire.

From Handling storing

Pushing power (1st March 2007)

Two Nu-Star Power Pushers are used at B W Industries' manufacturing facility in East Yorkshire to manoeuvre a range of rolled steel sections from point of production to despatch.

A range of trolleys are used at the site to t

From Handling storing

Pusher units (1st November 2006)

Airedale International Air Conditioning uses a Super Pusher from Nu-Star Material Handling to manoeuvre air conditioning and chiller units at its Leeds facility.

Air conditioning units are built up in several stages and rang

From Handling storing

Super Pusher (1st September 2006)

Airedale Air Conditioning has taken delivery of its first Nu-Star Super Pusher unit at its factory in Leeds.

From Handling storing

Pushing power shift engines (1st November 2005)

Cummins Engine has taken delivery of its first Nu-Star Super Pusher unit at its Daventry site. It will be used to move engine blocks during the build process.

From Handling storing

Get on a roll (1st September 2005)

Brendan Coyne spoke to Nu-Star’s managing director Matt Smith who is confident that its range of materials handling equipment can assist industry in its relentless quest to improve productivity while reducing costs and safeguarding its employees

From Handling storing

Push & pull (1st September 2005)

Stowe Woodward, supplier of elastomeric roller coverings, has taken delivery of a Nu-Star Super Pusher to push and pull roll handling bogies with loads of up to 55t at its Fife site.

From Handling storing

Super pusher (1st May 2005)

Two Nu-Star Super Pushers are used by Ibstock Brick at its site in West Sussex to push up to 24 drier cars at once into the tunnels where bricks are dried before going to the kiln. A line of cars weighs about 38t.

From Handling storing

Pushing safety forward (1st March 2005)

A Super Pusher from Nu-Star Material Handling is used by Godwin Pumps to move large HL130 - HL250 Dri-Prime pump units around its manufacturing and testing facilities.

From Health safety welfare

POWERFUL PUSHER (1st January 2005)

An extra high torque Power Pusher from Nu-Star Materials Handling is helping brick maker Hanson Building Products push brick kiln cars that weigh 12 000kg at its site in Elland, Halifax.

From Handling storing

Reel pushers take the strain (1st November 2004)

M-real, producer of fine paper, has purchased two Nu-Star Reel Pushers for its Sittingbourne Paper Mill in Kent. They will be used to move 1.3m diameter reels of paper (weighing up to 3t) from the paper winder into an automated floor track or a tempo

From Health safety welfare

Pushes and pulls steel sheet (1st September 2004)

Permastore has taken delivery of a Nu-Star Power Pusher to keep its new Trumpf Trumatic TC5000R steel press supplied with stainless steel. The Power Pusher is used to push and pull stacks of steel sheet into and out of the press. Sheets vary from 2 t

From Handling storing

Physical Effort Removed (1st July 2004)

As part of a 420k capital investment programme to support increased production, Permastore has taken delivery of a Nu-star Power Pusher as a means of keeping its new Trumpf Trumatic TC5000R steel press supplied with sheet steel.

From Handling storing

Helps to move cable drums (1st January 2004)

At Pirelli Cables in Wrexham, a third Hi-Torque Power Pusher has been delivered to move large cable drums. Supplied by Nu-Star Material Handling, the pedestrian-operated, battery powered tug unit is designed to push rolling loads up to 40 000kg in we

From Handling storing

Second reel mover installed (1st November 2003)

St. Regis Paper Company has taken delivery of its second Nu-Star Power Pusher at its Watchet, Somerset site. It will be used to push reels of recycled envelope paper and coreboard. The Power Pusher is a pedestrian-operated, battery-powered tug unit t

From Health safety welfare

Horse movement made easier (5th September 2003)

Eagle Ottawa, LLC, uses two Nu- Star PowerTugs at its Warrington site to move A-frame trolleys known as ‘horses’, that are used to transport leather hides

From Handling storing