Endress + Hauser Limited, Spill prevention

ipesearch.com

Click to visit http://www.igus.co.uk


	What next? Request further Information visit web site Send to friend Endress + Hauser Limited company's profile

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://air.irco.com/uk/

Click to visit sponsors web site

Machine Building 2009

MTec 2009

Click here for the latest compressed air news !

Spill prevention
September 1st 2006

Oil is the most common pollutant in the UK and is costly to clear up.

The storage of oils is regulated under the Control of Pollution (Oil Storage) Regulations 2001 applying to sites storing more than 200 litres of oil.

A recent Oil Care Campaign report found that a common cause of oil pollution incidents was overfilling of the tanks. The guidelines state that the tank must be fitted with an automatic overfill protection device if the filling operation is controlled from a place where it is not practical to observe the tank and any vent pipe.

Endress+Hauser's Liquiphant M vibrating level switch is a cost effective,reliable solution for pollution prevention in oil storage tanks. With high and low level alarm functions and a fork build-up and corrision monitoring system, it is immediately apparent if there is a problem.

More articles from Endress + Hauser Limited:

Sensor range (1st September 2008)

Endress+Hauser's Cerabar pressure sensor range has been designed for manufacturing plants in the life science industries where reliable, accurate pressure measurement can mean the difference between a plant running to

From Plant process control

Measures flow (1st July 2008)

As an inline ultrasonic flowmeter, Prosonic Flow 92F provides reliable results with both conductive and non-conductive fluids, offering better than 0.5% accuracy (optional 0.3%) for costeffective inline flow measurement

From Plant process control

Data analysis (1st July 2008)

Endress+Hauser will be exhibiting a range of equipment for automatic data collection, Energy Monitoring & Targeting software and a range of key utility meters. The company will show visitors how to set energy efficiency

From Energy management

Direct metering (1st January 2008)

The new Promass S Coriolis mass flowmeter from Endress+Hauser meets all the hygienic requirements for use in the food & beverage industry, it has 3-A authorisation and EHEDG certification.

From Plant process control

Temperature transmitter (1st November 2007)

For temperature measurement in the field, Endress+ Hauser's iTemp TMT162 transmitter is said to deliver reliable results time after time. It features EMC immunity to NAMUR NE21 (insensitive to motors and generators), signal o

From Plant process control

Hygienic flowmeter (1st November 2007)

Endress+Hauser's new Promass P Coriolis mass flowmeter is suitable for the stringent requirements of the life sciences sector. Offering the enhanced performance of a bent-tube meter with the drainability of a straighttube met

From Plant process control

Life cycle management (1st November 2007)

W@M – Life Cycle Management from Endress+Hauser is an open information management system providing data flow and archiving for the technical and operational management of a plant.

From engineering, procurement and commission

From Plant process control

pH measurement (1st September 2007)

Endress+Hauser's Memosens digital pH sensor allows process data to be saved directly in the sensor, guaranteeing interferencefree measuring signals, while simplifying process measuring technology.

From Plant process control

Convenient calibration (1st September 2007)

On-site calibration takes away the hassle of suspending operations while an instrument is sent away. Each device is removed from the process line, connected to a mobile rig and calibrated using fresh water. Following ca

From Plant process control

Limit detection (1st July 2007)

Whether in storage, buffer or process vessels, the Solicap M from Endress+Hauser offers solids level detection – even in harsh environments. ATEX dust approved, the rugged probe construction allows for high tensile (up

From Plant process control

Level measurement (1st July 2007)

Endress+Hauser's Prosonic S FMU 90 ultrasonic transmitters have a measuring range of up to 70m and offer continuous, noncontact level measurement of everything from fluids, paste and sludge to powdery and coarsegrained

From Plant process control

Performs well (1st November 2006)

Endress+Hauser's new Prosonic Flow 91W clamp-on ultrasonic flowmeter's non-invasive clamp-on installation, is said to perform well irrespective of internal pipe pressure, under process temperatures of -20 to 130ºC and has a m

From Plant process control

Switch on to safe measurement (1st November 2006)

Endress+Hauser's Ceraphant T pressure switch provides safe measurement and monitoring of absolute and gauge pressure in liquid, gas, steam and dust up to 100°C.

Thanks to its stainless steel housing and layered nameplate, Ce

From Plant process control

Simple, cost-effective flow measurement (19th October 2006)

Endress+Hauser says its new Prosonic Flow 91W clamp-on ultrasonic flowmeter offers high performance at an attractive price. Designed for both hot and cold water applications, Prosonic Flow 91W also benefits from a wide pipe diameter range of DN50 to 4000 – leading Endress+Hauser to claim it is possibly the most cost-effective flowmeter on the market.

From Newsletter Stories

Get maintenance products quickly (1st March 2006)

Endress+Hauser announces the arrival of the latest edition of its Instrument Express catalogue. It is designed to make regular purchasing of replacement or maintenance items more convenient.

From Plant process control

LEVEL SWITCH (1st September 2005)

Endress+Hauser’s new Soliphant M level limit switch for fine-grained or powdery solids is said to offer outstanding performance, even in hazardous areas (ATEX and SIL 2 certified).

From Plant process control