Toxic sensors added (1st July 2010)

Crowcon has expanded the capabilities of its Tetra:3 (T3) personal multi-gas detector with three more toxic gas sensors: ozone, sulphur dioxide and ammonia. These complement its existing sensor range which includes flam

From Health safety welfare

  Take control (1st July 2010)

Crowcon's Vortex range of multichannel gas and fire detection control panels has been extended to include an ATEX certified Exd Flameproof version – the Vortex FP, which can be used in Zone 1 and Zone 2 hazardous areas.

From Health safety welfare

  Ul certified (1st May 2010)

Crowcon's intrinsically safe TXgard- IS+ gas detector is fitted with electrochemical sensors which enable it to detect a wide range of toxic gases and oxygen. Gases detected include those commonly found in industrial ap

From Health safety welfare

  Detectors keep wine cellars safe (1st May 2010)

Tuscan winery, Selvapiana, is using Crowcon's CellarSafe and Xgard fixed CO2 gas detectors to protect workers in its cellars. The units were installed by Parsec S.r.l., which works closely with Crowcon in the Italian wi

From Health safety welfare

  Capabilities of portable gas detector expanded (1st March 2010)

Crowcon has expanded the capabilities of its T3 personal multi-gas detector with three more toxic gas sensors: ozone (O3), sulphur dioxide (SO2) and ammonia (NH3). This complements the existing sensor range which includ

From Health safety welfare

  Analyser family (1st March 2010)

Designed to assist heating engineers in the safe installation and servicing of boilers and combustion systems, Telegan's Sprint V range comprises five instruments in one small, handheld unit – flue gas analyser, differe

From Energy management

  More toxic gas capabilities added (1st January 2010)

Crowcon has expanded the capabilities of its T3 personal multi-gas detector with three more toxic gas sensors: ozone (O3), sulphur dioxide (SO2) and ammonia (NH3). This complements the existing sensor range which includ

From Health safety welfare

  Gas detector for leak survey tasks (1st November 2009)

Crowcon's new Gas-Tec portable hydrocarbon gas detector is designed for rapid leak survey and localisation applications. Using the company's flame ionisation chamber, the detector also features GPS, data and event loggi

From Health safety welfare

  Tiny CO2 detector (1st September 2009)

The Gasman CO2 detector from Crowcon is small and easy to use.

From Health safety welfare

  IR gas detector (1st July 2009)

Crowcon's new IREX infrared (IR) flammable gas detector is designed to replace pellistor (catalytic bead) type flammable gas detectors, resulting in faster response times and reduced zero drift. Capable of detecting met

From Health safety welfare

  ATEX approval for leak detector (1st March 2009)

Crowcon Detection Instruments has extended its agreement with the technology development arm of a Japanese gas utility to offer the new LaserMethane mini methane leak detector. The LMm is lightweight and compact, provid

From Health safety welfare

  Brew in safety (1st March 2009)

Reliable detection of excess CO2, O2 depletion and other gas hazards in the brewing industry is essential.

From Health safety welfare

  Quick to respond (1st March 2009)

Crowcon's new IREX infrared (IR) flammable gas detector is designed to replace pellistor (catalytic bead) type flammable gas detectors. It is said to offer faster response times and reduced zero drift.

From Health safety welfare

  Award winner (1st January 2009)

Crowcon's Tetra:3 CO2 portable multi-gas detector has won the Safety Innovation 'Top Selection' Award at the Security and Safety Awards held at the Sicurtech 2008 Expo in Italy.

From Health safety welfare

  ATEX laser methane detector (1st November 2008)

Crowcon Detection Instruments has extended its agreement with the technology development arm of a major Japanese gas utility to offer the new LaserMethane mini methane leak detector.

From Health safety welfare

  Detects CO2 (1st September 2008)

The new Gasman CO2 detector from Crowcon is compact and easy to use. Weighing just 130g, it is durable, has high impact resistance and dust and water ingress protection to IP65.

From Health safety welfare

  Brewing gas hazards (1st September 2008)

Reliable detection of excess CO2, O2 depletion and other gas hazards in the brewing industry is essential.

From Health safety welfare

  Brewing gas hazards (1st September 2008)

Reliable detection of excess CO2, O2 depletion and other gas hazards in the brewing industry is essential.

From Health safety welfare

  New IR gas detector (1st September 2008)

Crowcon says its new IREX infrared (IR) flammable gas detector is designed to replace pellistor (catalytic bead) type flammable gas detectors, resulting in faster response times and greatly reduced zero drift. Capable

From Health safety welfare

  Gas detector (1st July 2008)

Crowcon has added features to its Triple Plus+ portable gas detector, making it even more versatile.

From Health safety welfare

  Laser methane detector (1st July 2008)

Crowcon Detection Instruments has extended its agreement with the technology development arm of a Japanese gas utility to offer the new LaserMethane (LMm) mini methane leak detector.

From Premises management maintenance

  Gas detector (1st May 2008)

The Xgard IR LPG from Crowcon is a low cost infrared fixed gas detector designed to detect LPG gas hazards before concentrations reach flammable levels.

From Health safety welfare

  Monitors for hire (1st May 2008)

ESS Safeforce has added more than 250 Crowcon gas detectors to its hire fleet.

From Health safety welfare

  IR sensors (1st March 2008)

The Xgard IR from Crowcon is a low cost infrared flammable gas and carbon dioxide sensor designed for use in fixed point detection systems.

From Health safety welfare

  Ir flammable and co2 sensor (1st November 2007)

The Xgard IR from Crowcon is a new, low cost infrared (IR) flammable gas and carbon dioxide sensor for use in fixed point detection systems.

From Handling storing

  Multi-gas detector (1st September 2007)

Available from Crowcon, the Triple Plus+ portable gas detector now includes additional features to increase its versatility.

From Health safety welfare

  Efficient and safe (1st July 2007)

The new Crowcon Hydra addressable gas detection system provides a new way of detecting toxic gases from vehicle exhausts, such as Carbon Monoxide (CO), oxides of Nitrogen (NO/NO2) and petrol vapour, in enclosed or unde

From Health safety welfare

  Tiny addition (1st July 2007)

Crowcon has introduced two new versions of the Eikon, its tiny, disposable, single gas detector.

From Health safety welfare

  For hot places (1st May 2007)

Crowcon's intrinsically safe Detective+ free-standing, transportable gas detector has been granted IECEx and ATEX certification for use in temperatures to 50°C. This makes it suitable for use in explosion hazard areas i

From Plant process control

  Lightweight and easy-to-use (1st May 2007)

The new Gasman CO2 detector from Crowcon is small, lightweight and easy to use. Weighing just 130g and with dust/water ingress protection to IP65, it is said to be extremely durable and to have high impact resistance.

From Health safety welfare

  Tough & tiny (1st March 2007)

Crowcon has introduced two new versions of Eikon, its disposable, single-gas detector that measures less than 70mm long.

New versions detect ammonia and chlorine and are guaranteed to operate without the need for parts or ma

From Health safety welfare

  Tough, small and lightweight (1st November 2006)

Extending the family of Tetra portable gas monitors, the lightweight Tetra:3 from Crowcon Detection Instruments combines extremely rugged design with small size and simple operation.

Designed for use in demanding industrial

From Health safety welfare

  Gas monitor (1st July 2006)

Compact, rugged and simple to operate, the Tetra:3 portable gas monitor from Crowcon Detection Instruments monitors oxygen, toxic and flammable gases

From Health safety welfare

  Compact multi-gas monitor (1st May 2006)

The Tetra:3 portable gas monitor from Crowcon Detection Instruments is compact, low weight and simple to operate.

From Health safety welfare

  Detector for use with short-term gas hazards (1st March 2006)

Aversatile free-standing, transportable gas detector from Crowcon provides reliable protection wherever there are short-term gas hazards.

From Health safety welfare

  Flammable gases quickly detected by ATEX unit (1st March 2006)

The ATEX certified Xgard Type 4 gas detector from Crowcon is designed to quickly detect flammable gases in high temperature applications (up to 150°C) such as gas turbines, or gas-fired drying ovens.

From Health safety welfare

  ATEX gas detector (1st January 2006)

The new, ATEX-certified Xgard Type 4 gas detector from Crowcon is designed to quickly detect flammable gases in high temperature applications (up to 150°C) such as gas turbines or gas-fired drying ovens.

From Premises management maintenance

  ATEX approval (1st January 2006)

New from Crowcon, the Gasman single gas detector has received full ATEX approval for use in hazardous areas.

From Health safety welfare

  Monitors purge vent gas (1st November 2005)

Emptying hydrocarbon storage tanks, reactors, pipelines or other vessels is dangerous because there is a high risk of creating an explosive mixture if purging is not managed correctly.

From Health safety welfare

  Cost cutting (1st July 2005)

Crowcon’s new CheckBox IMH (Instrument Management Hub) automates the calibration and bump testing of portable gas detectors, reducing operation time and cutting costs.

From Premises management maintenance

  Detects gas (1st May 2005)

To protect staff from the danger of depleted oxygen levels, Rutherford Appleton Laboratory has installed Crowcon gas detectors and a Gasmaster control panel. The panel displays oxygen levels in all testing cleanrooms simultaneously on an LCD for at-a

From Health safety welfare

  Gas monitor (1st November 2004)

The new Gasman personal gas monitor from Crowcon Detection Instruments is small, light and easy to use even in tough industrial environments.

From Health safety welfare

  At-a-glance gas monitoring (1st November 2004)

Crowcon’s new Gasmaster control panel has been designed to make the monitoring of toxic and flammable gases even easier.

From Health safety welfare

  Simple to use gas testing kit (1st September 2004)

Users of portable gas detectors need to know that their units are working properly and will always alarm in the presence of hazardous gases. Crowcon has, therefore, introduced a new Gas Testing Kit so that users of the Tetra four-gas personal monitor

From Health safety welfare

  Gas detectors (1st July 2004)

New gas detectors from Crowcon can cut running costs and simplify maintenance of fixed detection and alarm systems. Covering flammable toxic and oxygen hazards, the Xgard range has a universal junction box and replacement sensors that simply plug in.

From Plant process control

  Tiny fixed life gas detectors (1st January 2004)

Crowcon has developed three new variants of Eikon, its tiny single-gas detector. Running without parts or maintenance for a guaranteed two years, the device is now available in versions to detect sulphur dioxide, ammonia and chlorine. Measuring less

From Health safety welfare

  Durability key factor in choice of gas detector (1st November 2003)

Chosen for their durability, more than 300 detectors from Crowcon help protect engineering and production staff from gas risks at Shell UKs Stanlow manufacturing complex. Where only one hazard is to be monitored, personnel are issued with Gasman II s

From Health safety welfare

  New detector (1st September 2003)

The latest TXgard-15+ hydrogen detector from Crowcon is an intrinsically safe unit immune to most hydrocarbons and other flammable compounds, ensuring precise measurement of hydrogen alone. Tracking concentrations as high as 50% of the lower explosiv

From Health safety welfare