Campbell Associates Ltd, Bad vibes

ipesearch.com

Click to visit http://www.eriks.co.uk/mtd/page3.asp


	What next? Request further Information visit web site Send to friend Campbell Associates Ltd company's profile

Click to visit http://www.totalexhibition.com/ipe

Click to visit http://www.machinebuildingukshow.com

Click to visit http://www.mtecukshow.com

Click here for the latest compressed air news !

Bad vibes
July 1st 2006

Campell Associates has launched the VM30-H Human Vibration meter to meet the requirements of the 2005 'control of vibration at work' regulations.

Excessive exposure to vibration causes adverse medical conditions to the human body which are well documented. It is therefore essential that as part of a H&S programme, at-risk personnel are monitored.

The VM30 HVM provides a simple system for measuring and quantifying risks in hand, arm and whole body vibration.

More articles from Campbell Associates Ltd:

Free calibration of calibrators (1st January 2010)

Campbell Associates is offering to calibrate a calibrator free of charge when it is sent in with a sound level meter for calibration.

From Health safety welfare

Hand it to the monitor (1st November 2009)

CVK has developed products to facilitate simple, cost effective and reliable measurements of vibration and its effect on humans.

From Health safety welfare

Checks on vibration (1st January 2008)

New regulations now limit the exposure of employees to both hand arm and whole body vibration. The MMF-VM30 Human Vibration Meter meets all the requirements of the Standards mentioned in the HSE Guidance and can be use

From Health safety welfare

Sound power measurements (1st September 2007)

SOUNDSOUND POWER MEASUREMENTS The EU directives on noise labelling of many types of machinery, both industrial and domestic, are now implemented into UK law. These require products to carry a noise label that gives the

From Health safety welfare

Hire service available for sound level meter kits (1st July 2007)

The Noise at Work regulations 2005 came into force in April 2006, prompting a fresh look at noise problems in the workplace to ensure that the new lower noise exposure limits are a reality.

From Health safety welfare

Noise check service (1st January 2007)

Regulations covering both noise at work and the environmental impact of industrial plant require noise assessments to be made from time to time to demonstrate compliance.

This presents problems in those industries where intr

From Health safety welfare

Human vibration meter (1st November 2006)

Available from Campbell Associates, the new VM30-H human vibration meter has been introduced to meet the requirements of the 2005 Control of Vibration at Work Regulations.

The meter provides a simple means of measuring and q

From Health safety welfare

New laws, sound good (1st July 2006)

New noise at work legislation is coming into force, bringing changes to many workplaces throughout the UK. Old regulations have been superceeded by new levels lowering the limiting or action levels to 80dB, bringing an estimated additional two millio

From Health safety welfare

Sound unit (1st May 2006)

To help comply with noise at work legislation and carry out risk assessments, Campbell Associates can supply the Nor132 Sound Level Meter, which is designed to be robust and simple to use.

From Health safety welfare