Campbell Associates Ltd, Noise check service

ipesearch.com

Click to visit http://www.healthandsafetyevents.co.uk


	What next? Request further Information visit web site Send to friend Campbell Associates Ltd company's profile

Click here to visit
sponsor's
website

Click to visit http://www.theenergyevent.com/

Click to visit sponsors web site

Click to visit http://www.healthandsafetyevents.co.uk

Click here for the latest compressed air news !

Noise check service
January 1st 2007

Regulations covering both noise at work and the environmental impact of industrial plant require noise assessments to be made from time to time to demonstrate compliance.

This presents problems in those industries where intrinsic safety (IS) requirements apply to electronic instrumentation used for these measurements. Campbell Associates operates a sound and vibration instrumentation instrument hire service that is used extensively by both Health and Safety Environmental Control professionals.

This service is now being extended to cover the petrochemical, mining and allied industries where IS controls apply by adding both noise dose meters and sound level meters with the necessary certifications for use in hazardous areas. These instruments are available for daily hire, complete with software.

More articles from Campbell Associates Ltd:

Checks on vibration (1st January 2008)

New regulations now limit the exposure of employees to both hand arm and whole body vibration. The MMF-VM30 Human Vibration Meter meets all the requirements of the Standards mentioned in the HSE Guidance and can be use

From Health safety welfare

Sound power measurements (1st September 2007)

SOUNDSOUND POWER MEASUREMENTS The EU directives on noise labelling of many types of machinery, both industrial and domestic, are now implemented into UK law. These require products to carry a noise label that gives the

From Health safety welfare

Hire service available for sound level meter kits (1st July 2007)

The Noise at Work regulations 2005 came into force in April 2006, prompting a fresh look at noise problems in the workplace to ensure that the new lower noise exposure limits are a reality.

From Health safety welfare

Human vibration meter (1st November 2006)

Available from Campbell Associates, the new VM30-H human vibration meter has been introduced to meet the requirements of the 2005 Control of Vibration at Work Regulations.

The meter provides a simple means of measuring and q

From Health safety welfare

New laws, sound good (1st July 2006)

New noise at work legislation is coming into force, bringing changes to many workplaces throughout the UK. Old regulations have been superceeded by new levels lowering the limiting or action levels to 80dB, bringing an estimated additional two millio

From Health safety welfare

Bad vibes (1st July 2006)

Campell Associates has launched the VM30-H Human Vibration meter to meet the requirements of the 2005 'control of vibration at work' regulations.

From Health safety welfare

Sound unit (1st May 2006)

To help comply with noise at work legislation and carry out risk assessments, Campbell Associates can supply the Nor132 Sound Level Meter, which is designed to be robust and simple to use.

From Health safety welfare