Ansell Healthcare Europe NV, Get a grip on safer mitts

ipesearch.com

Click to visit http://www.healthandsafetyevents.co.uk


	What next? Request further Information visit web site Send to friend Ansell Healthcare Europe NV company's profile

Click here to visit
sponsor's
website

Click to visit http://www.theenergyevent.com/

Click to visit sponsors web site

Click to visit http://www.healthandsafetyevents.co.uk

Click here for the latest compressed air news !

Get a grip on safer mitts
January 1st 2007

Hand protection specialist, Ansell, will be showing some innovative new industrial gloves at Health&Safety07, including: AlphaTec – which provides a better wet/oily grip (34-69% less grip force is needed to lift heavy oily objects and the Ansell Grip Technology has been verified by the University of Birmingham).

Touch N Tuff – who's 100% nitrile composition is highly recommended against the aliphatic hydrocarbons present in lubricants.

Aquadri – an ultra-thin 0.025mm polymer composite coating that absorbs up to four times more moisture than standard cotton flock gloves.

Powerflex – for handling and carrying in temperatures as low as -30°C.

See these and more on stand 25 at Health & Safety 07 at Sandown Park 20-21 February.

More articles from Ansell Healthcare Europe NV:

Longer cuff for latest gloves (1st September 2008)

Ansell has broadened its portfolio of industrial gloves with the introduction of a long cuff version of the single-use Touch N Tuff nitrile glove.

From Health safety welfare

Cut resistance (1st September 2007)

Ansell's Vantage gloves use the latest technology to provide a high level of cut resistance, flexibility and comfort. Suitable for handling sharp tools and materials, the gloves incorporate Ansell's cut-resistance tech

From Health safety welfare

Good grip and oil repellence (1st September 2007)

The HyFlex 11-920 glove from Ansell Healthcare is designed for people handling slightly oily metal components who need a secure grip for safety and performance.

From Health safety welfare

All you need is glove (1st September 2007)

Ansell has launched its GuardianSM consulting service for industrial production sites. This assessment methodology, focussed on selecting the most appropriate work gloves, helps multinationals to increase more than work

From Health safety welfare

Health risks from working (1st March 2007)

What are metalworking fluids and what are they used for? Metalworking fluids (MWFs) are neat oils or water-based fluids which are sometimes referred to as suds, coolants, slurry or soap.

These types of fluids are typically u

From Production engineering

Health and safety in hand (1st January 2007)

Hand protection specialist, Ansell, will present its latest innovations for industry at Health+Safety 07.

Ansell provides targeted solutions for problems of grip or sweaty hands, exposure to extreme cold or chemical products

From Health safety welfare

Coating on gloves helps to keep hands dry (1st January 2006)

Ansell Moisture Management Technology has been incorporated into an ultra-thin 0.025mm polymer composite coating for gloves that is said to absorb up to four times more moisture than standard cotton-flock gloves.

From Health safety welfare

Getting a grip in wet areas (1st November 2005)

A revolutionary new glove coating, Ansell Grip Technology, has just been launched by Ansell. The science behind it suggests it is a major step forward in protecting employeesâ€™ health

From Health safety welfare

Cut-resistant gloves afford comfort and durability (1st January 2005)

Anew range of cut-resistant gloves has been introduced by Ansell. The range incorporates Intercept technology that, the company says, can yield knitted gloves up to half as thick and a third lighter while offering an even higher resistance to cuts th

From Health safety welfare