Casella Measurement, Laser-based

ipesearch.com

Click to visit http://motordemo.eriks.co.uk/control_main_form/control_main_form.php


	What next? Request further Information visit web site Send to friend Casella Measurement company's profile

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit www.maintenanceuk-expo.com

Click to visit http://solutions.3m.co.uk/wps/portal/3M/en_GB/OccSafety/Home/Products_for/RespiratoryProtection/Particulate-Respirator/

Laser-based
November 1st 2004

Casella ETi has launched what it believes to be the UK’s first tuneable diode laser emissions monitoring system with ATEX approval for use in hazardous areas.

Proven technology in cross duct analysis of continuous emissions monitoring from within stacks enables measurement of average concentrations of gas in the ambient environment to a distance of 500m.

Use of tuneable diode laser (TDL) technology, makes possible monitoring of a single absorption line in the near infrared spectrum and eliminates cross interference by other gases. The TDL approach is said to enable very low detection limits, to PPB levels, for many gases. Open path NEO technology enables up to 20 different gases to be measured, The system is described as easy to set-up and align.

More articles from Casella Measurement:

Updates to range (1st March 2012)

Casella CEL will showcase industrial hygiene and occupational health and monitoring equipment. The company's new lightweight CEL-960 Human Vibration Meter with Db98 software features remote operation mode for easier mea

From Health safety welfare

Addition of voice recording functionality (1st January 2012)

Following the launch earlier this year of its CEL-630 series of sound level meters, Casella CEL, has made a number of enhancements that will further improve one of the smallest devices of its kind currently available.

From Health safety welfare

New human vibration meter (1st September 2011)

Casella CEL will be launching its lightweight CEL-960 human Vibrometer and associated dB98 software at Health & Safety North. Featuring a compact robust design, it has been purpose developed to measure 'hand-arm' (HAV)

From Health safety welfare

One-stop-shop for air sampling consumables (1st September 2011)

To offer customers the convenience of a one-stopshop experience, Casella CEL has launched a stock range of products to complement its personal air sampling systems for measuring employees' exposure to dusts, fumes, gas

From Health safety welfare

Sound meters (1st March 2011)

New from Casella, the CEL-630 Series of sound level meters can be used across a wide range of noise monitoring situations in both the environment and/or the workplace.

From Health safety welfare

Latest Evolution (1st January 2011)

New from Casella Monitor, the Evolution range of ambient gas analysers is designed to offer improved user interface and functionality without compromising on measurement cell performance or quality of data.

From Health safety welfare

Meters unveiled (1st January 2011)

New light and air velocity meters have been unveiled by Casella CEL.

From Health safety welfare

Switch on and go (1st January 2011)

Investment in new software has enabled Casella to launch its CEL- 630 Series of sound level meters that can be effortlessly used in a wide range of noise monitoring situations in both the workplace and/or the environmen

From Health safety welfare

Tips in favour (1st January 2011)

As part of its ongoing product improvement and development program, and in response to increasing demand for accurate measurement of high rainfall intensities, Casella has instigated a new fully automated dynamic calib

From Plant process control

Better insight (1st November 2010)

The latest upgrade to Casella CEL's insight occupational exposure data management software means that it can now be used in conjunction with the company's Microdust Pro realtime monitor to automatically download, man

From Health safety welfare

Monitoring range (1st September 2010)

Products on Casella CEL's stand will include the redesigned and more robust dBadge noise dosimeter that can be used reliably in harsh environments. Visitors will be able to examine the dBadge lite, aimed at those who wa

From Health safety welfare

Achieving high level service status (1st September 2010)

Casella CEL is now a Level 2 authorised service centre and an official distributor for RAE Systems' gas detection monitors and photoionisation detectors.

From Health safety welfare

Intrinsically safe (1st July 2010)

Casella CEL's TUFF range of Personal Air Sampling Pumps has gained ATEX (and IECEx) Intrinsically Safe approval for use in flammable atmospheres. This means the TUFF pumps can be used at hazardous plants and production

From Health safety welfare

Noise dosimeters redeveloped (1st July 2010)

Casella CEL has redeveloped its lightweight cable-free dBadge noise dosimeter, enabling it to be used reliably in the harshest environments.

From Health safety welfare

Free second noise dosimeter (1st July 2010)

Casella CEL has announced a limited special offer on its noise at work kit, representing a saving of up to £1400.

From Health safety welfare

Zero air generator (1st March 2010)

Casella Monitor has introduced ZeroGen, a cartridge-based zero air generator that removes the need for zero calibration gas cylinders when performing calibration checks on ambient air gas analyser systems.

From Health safety welfare

Software handles the data monster (1st January 2010)

Casella CEL has introduced a new data management software package that downloads and manages exposure data for a wide range of occupational hazards, including noise and dust.

From Health safety welfare

Upgrade scheme (1st September 2009)

Casella is offering customers an incentive to upgrade monitoring instrumentation. An oldfor- new replacement scheme can save users up to 30% on new replacements, and the company is offering a 50% reduction on its Mic

From Health safety welfare

Recent additions (1st September 2009)

Casella CEL has been highly active this year with new product launches and product line improvements.

From Health safety welfare

Data management software package (1st July 2009)

Casella CEL has launched a new data management software package that downloads and manages exposure data for a wide range of occupational hazards, including noise and dust.

From Health safety welfare

Sampling unit (1st July 2009)

A new low entry price, 18 filterexchange, gravimetric particulate sampling unit has been introduced by Casella Monitor.

From Plant process control

Smaller analysers big on benefits (1st May 2009)

There have been huge innovations in the design of noise monitoring equipment since the late 1960s when the first sound level meters were produced.Tim Turney, product manager Casella CEL, comments

From Health safety welfare

Occupational noise kit simplifies assessments (1st March 2009)

As most organisations have some workers who are constantly on the move and some who stay put for an entire shift, Casella CEL has developed an Occupational Health and Safety Noise Kit with both a sound level meter and

From Health safety welfare

Special offer (1st November 2008)

Casella CEL has partnered with Industrial Scientific (ISC) to expand its portfolio of personal monitoring equipment to include gas monitoring devices.

From Health safety welfare

Colouring sound level readings (30th July 2008)

Casella CEL has developed a colour-coded display system for sound level meters which simplifies their use and reduces the risk of misinterpreting data...

From Newsletter Stories

Keeping the peace (1st July 2008)

Getting an accurate noise assessment based on true readings is vital when there is any question of the legal thresholds being breached says Tim Turney, product manager, Casella

From Health safety welfare

Environmental evolution (1st March 2008)

The company that has been supplying scientific instruments since 1799 and whose customers have included Dr Livingstone and Charles Darwin and has now achieved its own evolutionary triumph. Casella Measurement has just ac

From Energy management

Hot and sweaty threat to health (1st March 2008)

Until someone collapses on your factory floor with heat stroke, you may not give much thought to the effects of working in heat. High temperatures and humidity challenge the body's ability to control its internal temperat

From Health safety welfare

Dosimeter aids selection of hearing protection (1st March 2008)

Anew product has been added to Casella CEL's dBadge noise dosimeter family. The CEL-352 dBadge 'Plus' measures the parameters necessary for the selection of hearing protection by HML or SNR methods.

From Health safety welfare

Sampling kits (1st March 2008)

To help users determine which sampling equipment they require to undertake specific sampling regimes for COSHH legislation, Casella has developed a range of specific sampling kits.

From Health safety welfare

Wind check (1st May 2007)

A company in Canary Wharf has installed two automatic weather stations on the roof of its high rise buildings to provide local weather information.

From Premises management maintenance

Noise checks (1st September 2006)

Casella CEL has created a combination of easy-to-use noise monitoring kits to enable employers to perform comprehensive surveys no matter what the working pattern of employees.

From Health safety welfare

Big noise for noise monitor (23rd May 2006)

Casella CEL has made the bold claim that its new CEL-350 dBadge turns an everyday noise monitor into a masterpiece!

From Newsletter Stories

Noise exposure made easy (1st May 2006)

Personal sound exposure is measured using wearable noise dosimeters typically worn on the belt with a cable-connected microphone mounted near to the ear. According to Casella, market research has indicated that the wearer often dislikes these microph

From Health safety welfare

New noise laws – win £1000 worth of Casella Monitoring kit (20th February 2006)

Noise monitoring equipment specialist, Casella, claims it can smooth the compliance process of new control of Noise at Work Regulations - which come into force in April - and has £1000 worth of kit to give away.

From Newsletter Stories

Fab four can aid compliance (1st July 2005)

Gary Noakes, a Fellow of the Royal Institute of Public Health & Hygiene and product manager for Casella CEL looks at a new range of instruments that can help sites ensure they are compliant with safety requirements In overall risk assessment terms th

From Premises management maintenance

Four new monitors (1st May 2005)

Four ATEX approved, intrinsically safe, portable instruments have been launched by Casella CEL.

From Health safety welfare

MEASURES MERCURY (1st January 2005)

In anticipation of legislation to extend the requirements for the measurement of mercury levels in the environment, Casella ETi has introduced a range of equipment that embraces on-line process instrumentation and laboratorybased systems.

From Plant process control

Heat meter shows safe entry (1st January 2005)

A heat meter from Casella CEL enables maintenance staff to enter potentially dangerous areas of Derwent Power Station in Derby earlier than was possible with a previous system.

From Health safety welfare

FEWER ERRORS (1st September 2004)

New products from Casella CEL are helping eliminate a common cause of acoustic measurement errors – range adjustments.

From Health safety welfare

Small success (1st January 2004)

Casella CELs noise Dosimeter Badge was developed after the company received calls from users asking it to reduce the size of personal samplers and, if possible, eliminate use of cabling. The CEL 310 Dose Badge (hardly bigger than a lapel badge) clips

From Health safety welfare

Measures up to three gases (1st November 2003)

A new range of multi-component laser-based gas measurement instruments from Casella ETi simultaneously measures up to three different gases, including CO, CO2, HCI, H2O, NH3 and HF, and combines acid gas and moisture measurement in situations where a

From Plant process control