Bearing units lubed for life (1st May 2008)

SKF has introduced a relubricationfree bearing unit for industrial fans used in air handling equipment in factories, airports, hospitals, office buildings and so on.

From Plant process control

  New catalogue details latest ball screws (1st September 2007)

SKF has published a new catalogue detailing its latest range of precision ground ball screws which are manufactured in the company's production plant in Italy. The catalogue also includes key criteria for unit specifica

From Plant process control

  Central role (1st September 2007)

The latest Vogel centralised lubrication system from SKF is designed to improve performance and reduce operating costs in food and beverage applications.

From Plant process control

  Linear motion guides (1st May 2007)

A linear motion guide range from SKF has been developed to minimise friction and maintenance costs, while maintaining repeatability and precision under heavy loads.

From Plant process control

  Every little helps (1st March 2007)

Two years ago, Swedish manufacturer, SKF launched BeyondZero, an initiative in which it pledged that the energy savings provided by its products and solutions would be greater than its own energy consumption. Its new Energy

From Plant process control

Beyond zero (23rd February 2007)

As part of its initiative, BeyondZero, in which SKF pledged to become carbon positive, the company has introduced a family of energy efficient bearings...

From Newsletter Stories

  Rolls-royce of an order (1st January 2007)

SKF Aeroengine UK has secured an order to produce bearings for the latest member of the Rolls-Royce Trent engine family.

The Trent 1000 has been selected as the launch engine for the Boeing 787 Dreamliner, which is due to en

From Plant process control

  Parntnership (1st January 2007)

Following its acquisition of Talwanbased Jaeger Industrial, manufacturer of electromechanical actuators, electronic control units and complete actuation systems, SKF, is now selling and supporting Jaeger's products throughout

From Plant process control

Data collection made simple (15th December 2006)

SKF says its Microlog Analyzer GX-E portable data collection system enables maintenance engineers to monitor simply and accurately the condition of a diverse range of rotating equipment. The handheld unit has been designed for the field-based collection of data, from vibration signal and process variables to bearing assessments, to ensure machinery continues to operate at optimum performance levels and maintenance costs are minimised.

From Newsletter Stories

SKF sleeve restores worn shafts quickly and economically (22nd November 2006)

SKF says its Speedi-Sleeve means worn shafts (which give rise to defective sealing) can be quickly restored to good-as-new condition without the need to dismantle the machinery in which they are used, and without the need for costly re-grinding. The result is big reductions in maintenance costs, and in expensive plant downtime. Read on to find out more.

From Newsletter Stories

  Boosting bearing life (1st November 2006)

Insocoat coated bearings and Hybrid bearings from SKF have been launched to extend the operating life of bearings used in motors and generators. In particular, they have been developed to combat the effects of electrical curr

From Plant process control

  A new approach to plant maintenance (1st November 2006)

Although preventative plant maintenance is now common practice, it adds little to a company's bottom line. Phil Burge, Marketing Manager at SKF, discusses how implementing a proactive asset efficiency optimisation strategy ca

From Plant process control

  Battery-powered lubrication system launched (1st September 2006)

The knowledge engineering company, SKF, has introduced a new Vogel centralised lubrication system, developed to provide costeffective and reliable lubrication in remote areas of factories.

From Plant process control

Optimise asset efficiency here (27th July 2006)

SKF has launched a knowledge portal to give engineers and analysts access to optimise asset efficency as simply and swiftly as possible.

From Newsletter Stories

  Wealth of advice for engineers (1st July 2006)

SKF has launched its educational, interactive website, @ptitudeXchange, in order to allow registered users access to a wide range of information and advice from both SKF and specially selected alliance partners. The site, can be found at <a href='htt

From Plant process control

  Flash device (1st January 2006)

SKF Maintenance Products has added the Stroboscope TMRS 1 to its range of instruments for operator driven reliability (ODR).

From Premises management maintenance

Thermal imaging for the masses (1st January 2006)

SKF's new TMTI 300 is a low cost thermal imaging unit aimed at those who wish to perform TI condition monitoring, but which thought it too cost prohibitive.

From In depth report

  Saves energy (1st May 2005)

Portable, lightweight induction heaters have been introduced by SKF to enable easy bearing mounting.

From Premises management maintenance

  SKF Vibration meter (1st March 2005)

SKF has introduced a card-type vibration assessment meter. Cost effective, the MicroVibe P fits into the compact flash card slot in a standard pocket PC.

From Plant process control

  SKF level system (1st March 2005)

The new Fixturlaser Level system from SKF needs only one person to operate it and is said to make accurate levelling and vertical alignment of machine beds fast and easy to achieve.

From Plant process control

New guide covers seal range (1st January 2005)

A new guide covering the range of seals offered from SKF’s CR (Chicago Rawhide) and Sealpool brands gives details of seals and applications for a broad range of applications.

From News

  Pocket size (1st January 2005)

SKF has launched an upgraded version of its MARLIN Pocket Pro data manager. Featuring a new 320 by 240 pixel colour display/ touch screen, it is especially useful for locations with uneven or inadequate lighting.

From Plant process control

  Easy align (1st January 2005)

Available in three variants is the FixturLaser Shaft system from SKF.

From Plant process control

  Hostile role (1st January 2005)

When Brunner Mond, producer of sodium carbonate and bicarbonate of soda suffered mechanical failures, SKF delivered a solution.

From Plant process control

  Fast heating (1st September 2004)

Heating a 210kg bearing from 20 to 110C only takes 20 minutes with SKFs new TIH 210m induction heater. Enhancing plant productivity and efficiency, the induction heater reduces heating time and power consumption by up to 30% and can cut heating costs

From Premises management maintenance

  Easy mount (1st September 2004)

To combat the mounting problems associated with large bearings, SKF has introduced the SensorMount system.

From Premises management maintenance

  NON-CONTACT (1st July 2004)

An intrinsically safe, multi-functional tachometer has been introduced by SKF for non-contact laser measurement of rotational or linear devices. Two models offer the choice of measurement in rev/min, rad/sec and metres, feet, or yards per minute or s

From Plant process control

  Lube solution (1st May 2004)

To address lubricant problems brought about by high operating temperatures, SKF has developed a maintenance-free lubricating solution. It can supply high temperature bearings that have a dry graphite lubrication technology, a solution that is said to

From Plant process control

  Drives sparking bearing failure? (1st March 2004)

If the bearings fail on an electric motor then engineers will generally assume its a mechanical problem. There is the strong possibility, however, that this apparently obvious premise is wrong and the solution may instead lie in the electrical system

From Plant process control

  Getting a grip on bearings (1st March 2004)

SKF claims to have revolutionised the handling of large bearings with the introduction of a Bearing Handling Tool. Forming part of the TMMH series, the off-the-shelf tool is said to make complicated, time-consuming and unsafe bearing handling a thing

From Plant process control

  NO EFFORT REQUIRED (1st November 2003)

SKF has introduced the TMMA 8E hydraulic EasyPull, equipped with a hydraulic pump, to allow the safe and effortless dismounting of bearings, pulleys and flywheels that require a force up to 80kN.

From Plant process control