Lube in a box (1st November 2009)

Fuchs' environmentally friendly lubricant pack, 'Bag in Box', is said to offer users tangible commercial advantages, including reduced waste disposal costs, minimal handling and reduced carbon footprint.

From Plant process control

  Specialist gear grinding oil (1st November 2009)

Fuchs UK has launched Ecocut HFN 13 LE-UNI, a high performance cutting and grinding oil that can be used for all machining processes within gear and bearing production and which is based on low aromatic hydro-cracked oi

From Production engineering

  New lubricant supply partnership (1st July 2009)

Fuchs UK has extended its lubricant supply partnership with Mahle Industries UK with a new lubricant service contract for the Mahle Engine Systems site in Kilmarnock.

From Plant process control

  High flyers (1st September 2008)

Lubricant specialist, Fuchs UK has won a three year contract to supply machining fluids and lubricants to CAV Aerospace an expert in machining, assembling and supplying components for the aerospace and optical industrie

From Production engineering

  The control of bacterial contamination (1st September 2008)

In response to the latest HSE guidelines, concerning the control of bacterial contamination in used water soluble metalworking fluids, and to coincide with the launch of the Ecocool Ultralife range of coolants, Fuchs UK has

From Production engineering

  Helps extend coolant life (1st July 2008)

Fuchs Lubricants launched its Ecocool Ultralife range of water soluble metalworking fluids at Mach 2008 and has been delighted by the response.

From Production engineering

  Coolant contract for castings firm (1st July 2008)

Fuchs UK has won a three year contract to supply and manage all coolants and lubricants to Amtek Aluminium Castings (Witham).

From Plant process control

  Synthetic aqueous sprays (1st July 2008)

The FUCHS Group is a supplier of process cleaning fluids, providing bespoke solutions to a variety of manufacturers in automotive, pharmaceutical/medical and aerospace industries. It counts VW, Ford, Nissan, Renault and

From Production engineering

  Coolant test kit (1st March 2008)

In response to the latest HSE guidelines concerning the control of bacterial contamination in used water soluble metalworking fluids, and to coincide with the launch of the Ecocool Ultralife range of coolants, Fuchs UK

From Production engineering

  Longer-life coolant (1st March 2008)

A range of five water soluble cutting fluids has been introduced by Fuchs Lubricants (UK) to satisfy the demands of the UK metalworking industry.

From Production engineering

  Metalworking fluids on show (1st March 2008)

Fuchs Lubricants (UK) will be showcasing its latest developments in water-soluble metalworking fluids – the Ecocool Ultralife range.

From Production engineering

  How lubricants can offer ethical and economical benefits (1st January 2007)

In 2007, one thing is clear: environmental control is no longer a peripheral issue but something that concerns us all. If 2006 was credited as the year that the world finally acknowledged the problems of climate change, 2007

From Plant process control

FREE Dosatron mixing unit (22nd November 2006)

Fuchs Lubricants (UK) is giving away a Dosatron mixing unit with the launch of two new products: Ecocool 2506S is a water-miscible cutting fluid developed for the machining of difficult aluminium and steel alloys; Ecocool CC2-SCI is a heavy duty, micro-emulsion concentrate for the machining of steel and cast iron.

From Newsletter Stories

  Premium quality oils launched (1st November 2006)

Fuchs Lubricants has launched Renolin CLP a new premium quality range of mineral gear oils. The new range of oils has been developed to meet the challenges placed on modern gear systems, which are subject to higher temperatur

From Plant process control

  Mixing unit FREE (1st November 2006)

Fuchs Lubricants (UK) is giving away a Dosatron mixing unit with the launch of two new products.

Ecocool 2506S is a watermiscible cutting fluid developed for the machining of difficult aluminium and steel alloys, although it

From Plant process control

  Biodegradable lubricants (1st September 2006)

Industry is facing a steadily increasing demand for improved profitability and efficiency. In the field of hydraulics, this has led to the design of systems which run at a higher pressure, with smaller pumps and oil reservoir

From Plant process control

  Proper lubrication pays (1st September 2006)

Proper lubrication is key to maintaining high performance of compressors claims, FUCHS LUBRICANTS.

From Energy management

Efficiency advantages from biodegradable lubricants (23rd August 2006)

Used on a range of equipment at the Eden Project, FUCHS UK's biodegradeable PLANTOSYN hydraulic fluid showed "amazing results" after two years unchanged use in an invasive, abrasive and destructive environment. Component wear rates were 10 times lower than conventional counterparts.

From Newsletter Stories

  Back at MACH (1st March 2006)

After an absence of eight years, Fuchs Lubricants (UK) will again be exhibiting at MACH.

From Plant process control

  Synthetic lubricants - the energy efficient solution? (1st March 2006)

Each year, when companies look to reduce maintenance costs, very few will investigate the savings available through introducing synthetic lubricants

From Plant process control

  Synthetic solutions to increasing energy prices (1st January 2006)

Businesses and households in the UK continue to be hit by increasing energy prices.

From Premises management maintenance

Free energy saving guide (30th November 2005)

For any machine to move, energy has to be provided to overcome friction. Minimising the energy lost to friction by employing effective lubricants can reduce the amount of power consumed - and therefore lower operating costs. FUCHS UK has published an

From Newsletter Stories

  Free energy saving guide (1st November 2005)

Businesses and households in the UK continue to be hit by increasing energy prices. In the home, the simple step of changing to energy saving light bulbs can make a noticeable difference, while the simple solution open to industry is switching to ene

From Energy management

  Safe addition (1st July 2005)

Fuchs Petrolub AG has acquired the industrial lubricants business of Parker Hannifin, that operates under the brand name Wynn’s.

From Premises management maintenance

  Oil handbook (1st May 2005)

Energy Saving Lubricants for Process Industries is a new guide from Fuchs Lubricants (UK) that details the Renolin Unisyn Ol range of synthetic, high performance compressor oils.

From Energy management

  Grease gun (1st May 2005)

New from Fuchs Lubricants, the Reiner System grease gun is designed to ease the application of long grease lines and to simplify maintenance schedules. Available with four types of grease, it produces 400bar of pressure, which is said to be double th

From Premises management maintenance

Lubrication tools (1st March 2005)

The Reiner system grease gun is one of two new lubrication tools from Fuchs. It is designed to ease the lubrication of long grease lines and to simplify maintenance schedules for lubricant techniques.

From News

  Latest oils lead to compressor cost savings (1st January 2005)

The intensive functions and high temperatures of a compressor can result in the accelerated ageing of its oil. This, in turn, can lead to more frequent service intervals, increased breakdowns and higher maintenance costs.

From Energy management

  Cost savings (1st January 2005)

Fuchs Lubricants (UK) offers high performance synthetic oils, all of which will be showcased at this year’s Maintec event.

From Plant process control

  COOL SOLUTION (1st November 2004)

Now available in the UK is the Reniso Triton SE/SEZ range of refrigeration oils.

From Plant process control

  New Bio-remedial parts washer (1st July 2004)

Due to tightening legislation the use of solvent based cleaners continues to cause health and safety and environmental management problems for users. However, the new Enviro-Wash parts cleaning system from Fuchs can address these issues without negat

From Production engineering

  Cost savings (1st May 2004)

The Ford Motor Company has presented a Manufacturing and Engineering Excellence Award to its Global Coolant Engineering team in recognition of the cost savings achieved by the use of Fuchs Lubricants low emission, low volatility Ecocut HFN 16LE gun d

From Production engineering

  LOW FOAMING (1st May 2004)

Fuchs Lubricants (UK) has introduced a low-foaming cleaning product specifically for cleaning and degreasing operations with steam cleaners and pressure washers.

From Production engineering

  INDUSTRIAL STRENGTH CLOTHS (1st March 2004)

Centrex Wipe-Out cleaning cloths from Fuchs Lubricants are made from a durable poly-cotton material and impregnated with a heavy duty cleanser to remove ingrained oil, dirt, grease and solvent-based materials, including paint and ink, from hands and

From Plant process control

  Fluids can help reduce machine downtime (1st September 2003)

Two new water-miscible cutting fluids that use Boron-free technology have been developed by Fuchs Lubricants (UK). Fuchs has developed two new fluids that provide the rust protection and bio-stability, previously only achieved with Boron. These flu

From Production engineering