Norbar Torque Tools Limited, TORQUE WRENCH LOADER

ipesearch.com

Click to visit http://www.eriks.co.uk/bigplus/


	What next? Request further Information visit web site Send to friend Norbar Torque Tools Limited company's profile

Click to visit sponsors web site

Click to visit http://air.irco.com/uk/

Machine Building 2009

MTec 2009

Click here for the latest compressed air news !

TORQUE WRENCH LOADER
September 1st 2004

Norbar’s new TWL 1500 torque wrench loader is said to overcome two of the barriers that the company believe prevented customers from introducing a loader into their torque wrench calibration system.

The device is the lowest cost torque wrench loader that the company has ever produced and it is compatible with a wide range of Norbar’s instruments and transducers.

Customers with an existing calibration system, but wishing to gain the advantages of a loader, in most cases can now do so while retaining their transducers and torque display instrument.

With appropriate transducers fitted, the TWL 1500 can test torque wrenches of up to 1500Nm and up to 1500mm in length.

More articles from Norbar Torque Tools Limited:

Measuring tension (1st July 2008)

In most applications, measurement of the torque applied to a bolt or threaded fastener during tightening provides sufficient feedback. In more specialised tasks, measurement of the fastener tension is essential to ensur

From Production engineering

Torque wrench range (1st May 2008)

A new gearbox design means new models in Norbar Torque Tools' range of Pneutorque pneumatic torque wrenches are now faster, lighter, smaller and easier to handle.

From Plant process control

Accuracy key to torque wrench (1st March 2008)

The key objectives for Norbar Torque Tools in designing its latest torque wrench were that it should be durable and stay in calibration for as long as possible, even when used regularly in tough workshop conditions.

From Plant process control

Gearing up for more production (1st January 2008)

Norbar Torque Tools has invested over £300,000 in a new Gleason-Pfauter CNC gear hobbing machine with robotic feeder in a bid to match demand for increased sales volumes of its Pneutorque pneumatic torque wrenches and

From Production engineering

Lower vibration (1st November 2007)

According to Norbar Torque Tools, purchasers of power tools often face a lack of reliable data on the actual vibration levels produced by tools in use.

The company commissioned research to compare the vibration effects on th

From Health safety welfare

Torque tool and tester (1st November 2007)

In motor racing accurate torque control of threaded fasteners is essential. The dangers of under- or over-tightening threaded fasteners are self-evident but, as well as the drivers having the confidence to push the car to the

From Plant process control

Vibration levels cut (1st September 2007)

The McKenna hammerless drain valve from Alcoa World Alumina Australia was awarded 'Highly Commended' in Western Australia's Chamber of Minerals & Energy Occupational Safety and Health Innovations awards.

From Health safety welfare

Shock report on torque (1st January 2007)

A recent survey carried out by Norbar Torque Tools has revealed a shocking lack of awareness of the importance of properly maintaining torque-controlled tools and wrenches - with a staggering 24% of respondents to the survey

From Plant process control

Double disc (1st July 2006)

Norbar Torque Tools has released a two-disc Flash multimedia presentation illustrating virtually every aspect of its activities.

From Plant process control

Three into TTT (1st May 2006)

The Torque Tool Tester Series 3 from Norbar Torque Tools has three transducer inputs which, the company believes, should allow most users to check all the torque wrenches they use - from the smallest to the largest - with suitable transducers simulta

From Plant process control

Torque multiplier (1st March 2006)

The accurate tightening of fasteners in restricted spaces presents a real challenge for manufacturers. Inaccessible fasteners can often only be reached using improvised tools that lack any kind of calibration or verifiable accuracy.

From Plant process control

Rallying support (1st January 2006)

Norbar Torque Tools' donation of more than £1000 worth of tools and equipment has helped the LEX Armed Forces rally team achieve its best ever performance in 10 years of competing in the gruelling Rally of Reykjavek.

From Production engineering

NEW CALIBRATION LAB (1st July 2004)

A new, enlarged and modernised UKAS accredited calibration laboratory has been opened by Norbar Torque Tools to cope with demand for its services.

From Production engineering

Five station tester (1st November 2003)

To increase the capacity and flexibility of its testing facilities Norbar Torque Tools has designed and built a five-station torque tool tester suitable for a range of applications. Each of the five spindles can be used independently or together to t

From Production engineering

For torque controlled tools (1st September 2003)

A new solution has been introduced by Norbar Torque Tools for easy, cost effective testing of torque controlled tools. A new range of transducers incorporates all necessary fixtures and connection leads, making specification and use quicker and easie

From Production engineering