Hi-Line Industries Ltd, For desiccant dry air at point of use

ipesearch.com


	What next? Request further Information visit web site Send to friend Hi-Line Industries Ltd company's profile

Click to visit www.maintenanceuk-expo.com

Click to visit sponsors web site

Click to visit sponsors web site

For desiccant dry air at point of use
July 2nd 2009

Where desiccant dry-air is a requirement at only a few stations within a multioutlet compressed air installation, Hi-Zorb units manufactured by Hi-line Industries can provide an economic solution to constant -40°C dewpoint air supplies provided at predetermined points of use.

The small product footprint is also suited to installation where factory floor space is at a premium. The Hi-Zorb design utilises twin extruded aluminium drying chambers filled with Molecular Sieve to provide a constant -40°C dewpoint with the lowest possible use of regeneration air. One chamber is always on-line with the second undergoing regeneration of the desiccant following an automatic changeover.

More articles from Hi-Line Industries Ltd:

Co-ordinating components (1st March 2012)

Hi-line Industries, manufacturer of compressed air treatment, conditioning and purification equipment, has strengthened its in-house technical team. Mark Baily has been appointed service & production co-ordinator, to

From Plant process control

Re-engineered to boost energy efficiency (1st November 2011)

The latest Hi-DRI compressed air membrane dryers from Hiline Industries have been reengineered to achieve new standards for performance and energy efficiency. An arrangement of structurally packed, permeable hollow fib

From Energy management

Nitrogen generated on-demand (1st September 2011)

Nitrogen generators from Hi-line Industries can be matched to individual site requirements for economy and performance. Nitrogen is commonly used throughout industries where safe, inert environments are required, includ

From Plant process control

Support for Hi-line agents (1st September 2011)

Air-treatment specialist, Hiline Industries has announced the appointment of Martin Cowap as product support manager. He will provide support for all the Hi-line agents and resellers located north of the company's Bur

From Plant process control

Smart dryers enhanced (1st July 2011)

Smart adsorption air dryers from Hiline Industries have been enhanced by touch-screen technology in their automatic energy management system (AEMS). This enables remote dial-in control via mobile phone or laptop. Lower

From Plant process control

Universal fitting (1st May 2011)

Hi-line Industries offers a range of high performance replacement filter elements. Keenly priced, these cross reference over 250,000 different filters, providing alternatives for a wide range of filtration products from

From Energy management

New air dryers (1st March 2011)

A CDA (Clean Dry Air) range by Hi- Line Industries, provides air that has been filtered and dehumidified to remove both particulates and moisture for safe use in pneumatic devices or systems.

From Plant process control

Heatless pressure swing dryers (1st November 2010)

A range of HPS (heatless pressure swing) adsorption dryers for compressed air systems are available from Hi-line Industries. These have simplified 'plug and play' installation and combine high efficiency with low runnin

From Plant process control

Service support (1st September 2010)

The service department at Hi-line Industries employs experienced personnel, dedicated to their own compressed air treatment products, but also trained on competitor's equipment. This enables them to provide discrete thi

From Plant process control

Savings without compromise (1st July 2010)

The new Filtersoft range of cartridge filters from Hi-line Industries is claimed to offer savings of up to 75% compared to the cost of some manufacturers' products. These savings are said to be achieved without any comp

From Plant process control

Hps adsorption dryers (1st March 2010)

A full range of HPS (heatless pressure swing) adsorption dryers for compressed air systems is available from Hi-line Industries.

From Plant process control

Air cooled chiller range (1st January 2010)

Available from Hi-line Industries, the Hi-Cool range of chillers for water and other process liquids comprises 27 models. Liquid cooling capacities from 3.2 to 426kW and nominal water flows from 550 to 73,270L/h can be

From Premises management maintenance

Latest air dryers (1st September 2009)

The latest Arctic Energy range of compressed air refrigerant dryers from Hi-Line Industries combine high build quality with reliability and are designed to achieve a minimum energy profile.

From Energy management

'Zero loss'dryers (1st January 2009)

Hi-Line Industries believes its latest smart versions of the ZL-HBP (zero loss-heater blower programme) desiccant air dryers to offer the lowest cost of ownership currently available for adsorption dryers. The control s

From Plant process control

'Zero loss' air dryer (1st November 2008)

The latest version of the Hi-line ZLHBP desiccant air dryer has been given the green light for energy efficiency.

From Plant process control