Whitelegg Machines Limited, Monitor it

ipesearch.com

Click to visit http://www.ni.com/vision/


	What next? Request further Information visit web site Send to friend Whitelegg Machines Limited company's profile

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://air.irco.com/uk/

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Machine Building 2009

MTec 2009

Click here for the latest compressed air news !

Monitor it
March 1st 2008

Whitelegg Machines are the UK agents for US company Baker. Tim Thomas, senior engineer at Baker will be joining them to answer visitor queries on Condition Monitoring equipment and software.

New power quality testing software, designed to monitor single and three phase systems, harmonics, distortion and voltage levels will be on show along with the Baker Explorer. The Explorer is a motor performance tester for non-intrusive monitoring of electric motors via their power cables.

Where access is difficult, in particular large underwater pumps, the Explorer is a solution. It is designed to monitor all sizes of LV and HV electric motors.

Stand in AEMT section

More articles from Whitelegg Machines Limited:

Undercutter is a vital piece of maintenance equipment (1st September 2008)

Working with Transport for London, Metronet is responsible for maintaining, replacing and upgrading the infrastructure on eight of London Underground's eleven lines.

From Plant process control

Motor tests (1st May 2008)

Baker Instrument Company's predictive maintenance testing equipment for electric motors was shown by Whitelegg Machines at Drives and Controls 2008.

From Plant process control

Motor tests (1st January 2008)

Whitelegg Machines has once again invited Tim Thomas, senior engineer of Baker Instrument Company, USA, to join its stand at Maintec 2008.

From Plant process control

Critical motor failure (1st January 2008)

A large medical equipment manufacturer uses a vast air conditioning system that must perform without failure nor malfunction. The system requires two large cooling towers that incorporate dozens of fan motors. The coolin

From Plant process control

New guide (1st May 2007)

Increasing reliability, optimising output and efficiency are key goals for process plant management.

From Plant process control

Free courses (1st May 2006)

Whitelegg Machines is offering plant engineering personnel a variety of technical lectures/ presentations on aspects of motor condition monitoring and potential failure analysis. Whitelegg are agents for the Baker Instrument Company of America, manuf

From Plant process control

Motor condition: free lectures (1st January 2006)

Whitelegg Machines has put together a series of presentations on motor condition awareness and monitoring.

From Premises management maintenance

Three in one tester (1st July 2004)

Suitable for both electric motor repair shop and production line, the new Motatest from Whitelegg Machines combines three tests that previously would have been carried out by individual instruments.

From Plant process control