Pump Engineering Ltd, Steam water mixer device

ipesearch.com

Click to visit http://www.ni.com/vision/


	What next? Request further Information visit web site Send to friend Pump Engineering Ltd company's profile

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://air.irco.com/uk/

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Machine Building 2009

MTec 2009

Click here for the latest compressed air news !

Steam water mixer device
January 1st 2006

The CSF steam water mixer provides a safe and reliable source of hot water delivered at the correct temperature and pressure.

Available through Pump Engineering, the mixer is a simpleto- operate device for cleaning process machinery and storage vessels, as well as washing down in designated 'clean' areas.

The mixers provide a water temperature to a maximum of 95°C and volumes to 10 000L/h. They are simple to install because existing steam and cold water supplies can be used. Also, running costs are minimal because the design of the mixer ensures that all the heat energy in the steam is transferred to the water.

In the past, certain applications required the availability of 'live' steam for sterilization. However, to meet health and safety requirements, the latest mixers are designed without this facility. This means the potential for live steam being discharged as a result of operator error is eliminated.

More articles from Pump Engineering Ltd:

Smooth operators (1st July 2008)

Suitable for pumping applications such as boiler feed, high pressure cooling, refrigeration and CIP chemical feed, the MTH range from Pump Engineering comprises regenerative turbine pumps that are available as direct dr

From Plant process control

All about control (1st May 2008)

Pump Engineering has introduced the PE Duplex 3Z electronic control panel for two pumps to its range of controllers. The compact controller is suitable for well pumps, pressure booster sets, irrigation pumps, sewage sum

From Plant process control

Valves for tough tasks (1st January 2008)

Certain process applications place tough demands on control valves, where despite a combination of factors, operational requirements demand a consistent, reliable performance.

From Plant process control

Quick-strip pumps (1st September 2007)

Quick-strip pumpsCSF-CS, CSA and CSM pumps are suitable for transferring liquids in dairy, food, pharmaceutical and process applications where reliable, 'CIPable' and easy-tomaintain pumps are required. The range of pum

From Plant process control

For control (1st January 2007)

Badger Meter, represented in the UK by Pump Engineering, offers metal control valves in sizes from 1/4 to 2in with materials of construction including stainless steel, Hastelloy, Monel, Inconnel, Alloy 20, titanium, tantalum

From Plant process control

Pump it up (1st January 2007)

The PE twin pump controller is a compact, self contained microprocessor controlled duty/standby/assist control panel with plug in connections for use with twin pump sets transferring from a bulk to a day tanker or similar int

From Plant process control

Peace-of-mind pumping (1st November 2006)

A new range of magnetic drive pumps, which are available in three types of hydraulic configuration; centrifugal, regenerative turbine and sliding vane, is the latest addition to the range of products supplied by Pump Engineer

From Plant process control

Handles high viscosity media (1st September 2006)

The new Viscoflux barrel emptying system from Flux Pumps is designed to help users efficiently and cost effectively empty barrels containing high viscosity materials.

From Plant process control

New pump brochure (1st September 2006)

Pumps for just about every liquids handling application is the theme of the new brochure published by PUMP ENGINEERING. The company markets a wide range of pumps, complemented by a rang of booster sets, control panels, contro

From Plant process control

Meeting fast food challenge (1st July 2006)

The chilled prepared food market has seen massive growth in the last few years with pizza, soups and pasta sauces becoming one of the largest sectors. To meet demand, manufacturers have to overcome the tricky processing challenges of handling an incr

From Plant process control

Self-Priming (1st May 2006)

Certain liquid transfer applications require a pump to deliver high heads and to be self-priming.

From Plant process control

Tough control valves (1st January 2006)

Meter control valves have been supplied by Pump Engineering for the controlled addition of corrosion and scale inhibitors on oil rigs.

From Plant process control

Pumps Pastes (1st November 2005)

A pump system for pastes and high viscosity products has been introduced by Pump Engineering.

From Production engineering

Easy-to-maintain (1st September 2005)

New, easy-to-maintain centrifugal pumps from Pump Engineering can be used to transfer liquids in pharmaceutical, dairy, food, beverage, and similar applications.

From Plant process control

FLOW CONTROL (1st May 2005)

A compact, actuated control valve that combines accurate modulating control of medium to low flow rates with optimum automated process control, is one of a new range of valves from Pump Engineering.

From Plant process control

CONTROL VALVE (1st March 2005)

Pump Engineering’s new compact, actuated control valve combines accurate modulating control of medium to low flow rates with optimum automated process control.

From Plant process control

Pocket sized diaphragm pump (1st January 2005)

The Pageboy SFD self-priming diaphragm pump is for aggressive or corrosive liquids. Available from Pump Engineering, the pocketsized, air-operated pump has three moving parts and low air consumption. A ‘stress-free diaphragm’ is key to its reliabilit

From Plant process control

Sensitive role (1st July 2004)

Suitable for handling sensitive and difficult fluids, ASV Stuebbes end-suction horizontal centrifugal pumps bareshaft or long coupled type NM and close coupled NMB are machined from solid blocks of pure thermoplastic.

From Plant process control

Centrifugal pumps (1st May 2004)

Quick-strip and easy-to-maintain centrifugal pumps have been introduced by Pump Engineering to transfer liquids in dairy, food and pharmaceutical applications.

From Plant process control

Unaffected by dry-running (1st November 2003)

ASV seal-less eccentric pumps are suitable for many fluids transfer applications. Tough and durable, they have minimal maintenance requirements. Available from Pump Engineering, the self-priming pumps are unaffected by dry-running, can pump in either

From Plant process control