WEG Electric Motors (UK) Ltd, Electric motors

ipesearch.com

Click to visit http://sine.ni.com/cs/app/doc/p/id/cs-10795


	What next? Request further Information visit web site Send to friend WEG Electric Motors (UK) Ltd company's profile

Click here to visit
sponsor's
website

Click to visit http://www.totalexhibition.com/ipe

Click to visit sponsors web site

Click to visit http://www.machinebuildingukshow.com

Click to visit sponsors web site

Click to visit http://www.mtecukshow.com

Click to visit sponsors web site

Click to visit sponsors web site

Click here for the latest compressed air news !

Electric motors
July 1st 2008

As part of the upgrade of the Yorkshire Water Waste Water Treatment Works in Halifax, WIMES compliant high efficiency WEG electric motors are being supplied to Spaans Babcock for refitting surface aerators for active sludge tank aeration lanes. "We use WEG motors because they are high efficiency EFF1 and WIMES compliant, with good delivery schedules," explains Mark Brown, marketing and sales director of Spaans Babcock. "The motors are being assembled with gear boxes to meet the individual requirements of each aerator application." A total of 12 lanes are being upgraded, with five aerators on each, three single speed motors at 11kW and two two speed motors with 22 or 10 kW outputs.

More articles from WEG Electric Motors (UK) Ltd:

Efficient blend (1st January 2010)

Since Mecaltec, manufacturer of equipment for the castings industry, installed WEGWmagnet motors in its equipment, the company has reduced operational costs and achieved higher efficiency and operating life.

From Energy management

'Wash'inverter (1st September 2009)

WEG's new IP56-rated 'Wash' CFW- 08 frequency inverter is designed to offer protection against water and dust in food, beverage and chemical applications.

From Plant process control

Motors installed (1st May 2009)

E.ON has installed two large WEG motors at Ratcliffe-On-Soar power station. Both have been installed in the Flue Gas desulphurisation plant which helps to reduce SO2 emissions while creating commercial quality gypsum. K

From Energy management

Pump efficiency: motor matters (1st January 2009)

Pumps are mostly driven by electric motors, and represent around 30% of a developed economy's use of electrical energy.Choice of correct motor size (almost always the AC squirrel cage induction motor) affects, says WEG,not

From Energy management

Motors off to India (1st September 2008)

Efficiency and value-formoney were the reasons Weir Minerals chose WEG EFF1 B3 induction motors for 20 pumps commissioned for a Paul Wurth blast furnace at the Vizag Steel Works in Andhara Pradesh, India.

From Plant process control

Custom-made motor solutions (1st September 2008)

Retaining asset value of investment in existing plant and equipment is aided by WEG's custom-made electric motor replacements which can match a range of outputs, voltages and speeds as well as most motor applications.

From Energy management

Sizing matters (1st July 2008)

Industry figures suggest around 80% of pump motors could be the incorrect size, comments Andrew Glover, product manager for WEG Motors. He believes most are overspecified by 10 or 15% by engineers wanting to be 'on the

From Energy management

Modular VF drive brings versatility to large motors (1st May 2008)

Improved plug-and-play philosophy for three-phase induction motor control is one of the features of WEG's CFW-11 variable frequency drive. The company has now added the CFW-11M modular drive which brings the CFW-11 des

From Energy management

Automated crane (1st January 2008)

WEG has supplied a full turnkey system including transformers, MV motors and MV frequency inverters to automate a large crane at the Usiminas steel plant in Brazil. The crane provides a 260-tonne lifting capacity on its

From Energy management

Efficiency drive (1st May 2007)

WEG Electric Motors says drive shafts.

From Plant process control