Whitelegg Machines Limited, Motor tests

ipesearch.com

Click to visit http://www.eriks.co.uk/mtd/index.asp


	What next? Request further Information visit web site Send to friend Whitelegg Machines Limited company's profile

Click here to visit
sponsor's
website

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://www.theenergyevent.com/

Click to visit http://www.healthandsafetyevents.co.uk

Click to visit sponsors web site

Click here for the latest compressed air news !

Motor tests
May 1st 2008

Baker Instrument Company's predictive maintenance testing equipment for electric motors was shown by Whitelegg Machines at Drives and Controls 2008.

For off-line testing of a motor's insulation system, AWA testers offer winding resistance, Meg-ohm, DC step voltage, PI and surge tests, providing a complete guide to insulation condition.

The surge test includes Baker's pulse-to-pulse error area ratio software for detecting weak turn-toturn insulation.

The Explorer online test unit monitors running motors, looking for power quality issues, broken rotor bars, overloading, mechanical issues, including bearing problems in either motor or load.This is achieved by measuring the voltage and current feeding the motor. New DC-3000 software lets Explorer be used for monitoring DC motors.

More articles from Whitelegg Machines Limited:

Helping to keep motor maintenance on track (1st January 2009)

Metronet, working with Transport for London, is responsible for maintaining, replacing and upgrading the infrastructure on eight of London Underground's 11 lines.

From Plant process control

Undercutter is a vital piece of maintenance equipment (1st September 2008)

Working with Transport for London, Metronet is responsible for maintaining, replacing and upgrading the infrastructure on eight of London Underground's eleven lines.

From Plant process control

Monitor it (1st March 2008)

Whitelegg Machines are the UK agents for US company Baker. Tim Thomas, senior engineer at Baker will be joining them to answer visitor queries on Condition Monitoring equipment and software.

From Plant process control

Motor tests (1st January 2008)

Whitelegg Machines has once again invited Tim Thomas, senior engineer of Baker Instrument Company, USA, to join its stand at Maintec 2008.

From Plant process control

Critical motor failure (1st January 2008)

A large medical equipment manufacturer uses a vast air conditioning system that must perform without failure nor malfunction. The system requires two large cooling towers that incorporate dozens of fan motors. The coolin

From Plant process control

New guide (1st May 2007)

Increasing reliability, optimising output and efficiency are key goals for process plant management.

From Plant process control

Free courses (1st May 2006)

Whitelegg Machines is offering plant engineering personnel a variety of technical lectures/ presentations on aspects of motor condition monitoring and potential failure analysis. Whitelegg are agents for the Baker Instrument Company of America, manuf

From Plant process control

Motor condition: free lectures (1st January 2006)

Whitelegg Machines has put together a series of presentations on motor condition awareness and monitoring.

From Premises management maintenance

Three in one tester (1st July 2004)

Suitable for both electric motor repair shop and production line, the new Motatest from Whitelegg Machines combines three tests that previously would have been carried out by individual instruments.

From Plant process control