Thermal mass flow meter measures greenhouse gas
May 1st 2010 Magnetrol International's
Thermatel Model TA2
Thermal Mass Flow Meter
measures greenhouse gases in
accordance with the new US
Environmental Protection Agency
rule (EPA 40 CFR part 98). This new
mandate requires companies emitting
more than 25,000t of CO2 per year to
report greenhouse gas emissions.
The Model TA2's thermal
dispersion technology provides an
accurate and economical method to
measure the amount of emitted
methane or natural gas, and assesses
emissions of carbon dioxide (CO2),
meeting the EPA requirements.
A direct mass flow measuring
instrument, it requires only a simple,
single insertion point into a pipe or
stack to install. Accuracy is better
than ±1% of reading +0.5% of
calibrated full scale and exceeds the
stated acceptable accuracy within the
new EPA rule. Instruments are
available for installation in line sizes
from 15mm to more than 3000mm.
It operates over a wide flow range
from 0.13 to 200 Nm/s with an
exceptionally wide turndown ratio up
to 100:1. More articles from Magnetrol International N.V.: | 
