Henkel Ltd, Tough adhesive

ipesearch.com

Click to visit http://www.ni.com/vision/


	What next? Request further Information Send to friend Henkel Ltd company's profile

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://air.irco.com/uk/

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Machine Building 2009

MTec 2009

Click here for the latest compressed air news !

Tough adhesive
July 1st 2008

Available from Henkel, Loctite 278 is a high strength threadlocking adhesive that is both oil tolerant and resistant to elevated temperatures. Being anaerobic, it cures when confined in the absence of air between close fitting metal surfaces. Once cured, it prevents loosening and leakage caused by shock and vibration.

Fixture time for Loctite 278 on M10 nuts and bolts is generally 10 to 15min. Full cure depends on the substrates and the bond gap. Although intended for use on permanent joints, disassembly is possible, achieved through the application of localised heat in excess of 250°C to the nut or bolt, then applying a torque.

More articles from Henkel Ltd:

Guide updated (1st September 2008)

Henkel's 'Solutions Guide' has been updated and includes details of 170 products from the Loctite and Teroson ranges and how they can be used to solve a wide range of engineering problems.

From Plant process control

Getting pumped up about maintenance (1st September 2008)

Industrial pumps represent a significant capital cost, so it is important, to ensure they run efficiently and reliably. Colin Chapman of Henkel, maker of Loctite products, provides some helpful advice regarding assembly a

From Plant process control

Getting it right (1st July 2008)

Henkel has introduced a new web site and brochure for its Loctite products to help engineers determine the threadlocking adhesive most appropriate for a job.

From Plant process control

Retaining: the need for knowledge (1st May 2008)

Bob Orme, senior technology specialist at Henkel, maker of Loctite brand adhesives, discusses the benefits of anaerobic engineering adhesives for cylindrical parts

From Plant process control

Automated adhesive applications (1st January 2008)

Henkel, through its Loctite brand, has a selection of dispensing equipment ranging from simple hand operated products to fully automated systems. The technology allows users to apply beads, drops or continuous rings of

From Production engineering

Gearing up to prevent costly failures (1st November 2007)

Colin Chapman of Henkel, maker of Loctite brand products, provides helpful assistance to the professionals who service industrial gearboxes and who look for reliability, longevity and cost reduction

From Plant process control

Adhesive chart (1st September 2007)

Henkel has produced a handy selector chart that shows where Loctite brand products can be effectively used. Where threadlocking is required to ensure nuts, bolts and screws do not vibrate loose, there are anaerobic adh

From Plant process control

Sticking up for adhesives (16th July 2007)

Involving the adhesives supplier at an early stage can help design engineers, says Bob Goss, of Henkel, maker of Loctite brand products...

From Newsletter Stories

Stick to the rules (1st July 2007)

Bob Goss, of Henkel, maker of Loctite brand products, maintains that involving the adhesives supplier at an early stage helps design engineers

From Production engineering

Turning around shaft repairs (1st May 2007)

Harsh environments and operating parameters can result in wear, erosion and corrosion of shafts.

From Plant process control

Makes light of sealing (1st March 2007)

For a limited period, Henkel Loctite Adhesives is offering purchasers of special packs of its Loctite 55 Sealing Cord a free Solitaire Maglite torch.

The pocket-size torch provides a high intensity light beam that can be adj

From Plant process control

Free guide (1st September 2006)

To help users make an informed choice when it comes to Loctite brand instant adhesives, Henkel has produced a handy eight-page brochure that lists the range of more than 20 adhesives and details the key features of each produ

From Plant process control

Loctite guide (1st July 2006)

Henkel, makers of Loctite brand products, has produced a new 62 page, fully illustrated, guide to assist maintenance enigineers who are involved with the service of industrial centrigual pumps. The brochure provides useful information about the compr

From Plant process control

Sticking with adhesives (1st May 2006)

Engineering adhesives are gaining more converts among maintenance people. Colin Chapman of Henkel, makers of Loctite brand adhesives, explains why - and gives some impressive examples

From Plant process control

Tailored training for effective maintenance (1st January 2006)

The plethora of adhesives, sealants, gaskets and similar products can make it hard for maintenance engineers to work out which is the most appropriate to use for a specific application. Henkel Loctite's Simon Groom explains how the company's training

From Premises management maintenance

Polymer-based adhesive (1st September 2005)

To offer customers a more comprehensive and integrated service, Teroson products have become part of the Henkel Loctite Adhesives portfolio. They will retain the Teroson brand name and will continue to complement other solutions from Henkel Group.

From In depth report

Getting stick (1st September 2005)

Three new stick products have been added to the range developed by Henkel Loctite Adhesives.

From In depth report