Burkert Fluid Control Systems, ATEX-approved

ipesearch.com

Click to visit http://www.eriks.co.uk/mtd/index.asp


	What next? Request further Information visit web site Send to friend Burkert Fluid Control Systems company's profile

Click here to visit
sponsor's
website

Click to visit sponsors web site

Click to visit http://www.healthandsafetyevents.co.uk

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://www.theenergyevent.com/

Click to visit sponsors web site

Click to visit sponsors web site

Click here for the latest compressed air news !

ATEX-approved
September 1st 2008

Bürkert's new Power I/O Box type 8643 is designed to connect binary signals to Foundation Fieldbus H1 or Profibus PA in process systems – easily, cost effectively and safely. ATEX approved for operation in Zones 1 and 21, Type 8643 meets all explosion-protection requirements, and offers users flexibility regarding intrinsically safe actuator and sensor technology.

The Power I/O Box type 8643 replaces conventional discrete cabling with a modular multiplexed system, saving space, cabling costs, and time during verification and documentation of safety procedures. The device is suitable for use in areas subject to explosion hazards, such as in petrochemicals, oil and gas, the pharmaceutical industry, water treatment and fine chemistry. For these sectors, it is available either in an aluminium or polyester casing with IP65 protection, or as an electronic module with IP20/ IP30 protection for Ex-e enclosures or control cabinets.

More articles from Burkert Fluid Control Systems:

Designed for CIP (1st May 2009)

Burkert's new 8221 conductivity sensor is designed for CIP, even during steam sterilisation. This allows the sensor to provide the time and cost saving benefits of phase detection across all transmitted media, including

From Plant process control

Flow measurement of high viscosity fluids (1st March 2009)

Burkert has extended its 8070/8071 range of positive displacement flow meters for the measurement of high viscosity fluids. The range now extends from 1/8 to 4in, providing metering with high levels of accuracy (

From Plant process control

Marketing Manager - position available at leading process control equipment manufacturer Bürkert Fluid Control Systems (24th September 2008)

Bürkert is looking to recruit a Marketing Manager to drive forward the marketing of Bürkert products and systems in the UK. This role presents a fantastic opportunity for a hands-on marketer with engineering experience...

From Newsletter Stories

Control & sensing products For process applications (29th July 2008)

Burkert’s new 466 page fluid control systems catalogue provides a wide range of innovative control and sensing solutions for processes such as water treatment, gas handling, hygienic processing, cooling systems, steam and microfluidics...

From Newsletter Stories

In control of water treatment (1st May 2008)

Anew multi-parameter controller from Bürkert automates the precise control of process variables within a water treatment system (boiler, cooling or Reverse Osmosis system), by integrating all control, monitoring, displ

From Energy management

Cut valve requirements by half (1st July 2007)

Burkert's Robolux valves reduce by a half – or more – the number of valves, diaphragms, pipe fittings and welds required in hygienic processing solutions such as filtration and water purification. As a result, they reduce i

From Plant process control

Specially designed manifolds (1st November 2003)

Burkert Fluid Control Systems has supplied specially designed manifolds and a number of sensors and valves to Doncasters Paralloy. They are used to control delivery of liquid electrolyte to two electro-chemical machining units that machine internal b

From Plant process control