Kistler Instruments Limited, Provides Flexibility

ipesearch.com

Click to visit http://sine.ni.com/cs/app/doc/p/id/cs-10795


	What next? Request further Information visit web site Send to friend Kistler Instruments Limited company's profile

Click here to visit CGFS's website

Click here to visit DFM Media's website

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://www.mtecukshow.com

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://www.machinebuildingukshow.com

Click to visit http://www.totalexhibition.com/ipe

Click here for the latest compressed air news !

Provides Flexibility
March 1st 2006

Following the introduction of its enhanced Dataflow software for injection moulding production process optimisation and monitoring, Kistler Instruments has introduced the Type 2859A upgraded signal conditioner to provide the flexibility needed to take full advantage of the software.

Backward compatible to protect capital investment, the signal conditioner can be used with a range of Kistler signal conditioning modules, including charge, thermocouple and voltage amplifiers. Up to four modules, each with four channels, provides up to 16 channels in one compact device.

Used with Dataflow Version 2.3 software and mould cavity sensors, the signal conditioner is said to simplify the entire processing sequence.

More articles from Kistler Instruments Limited:

Flexible torque sensors (1st November 2009)

Offering an extremely wide measuring range, Kistler piezoelectric torque sensors are adaptable to match most configurations, making them suitable for manufacturing process monitoring. Robust, compact and highly sensiti

From Plant process control

Modules added (1st September 2009)

Kistler Instruments has expanded its electromechanical, press fit joining system with the addition of two new compact NCFH modules with 10 and 15kN nominal joining force to replace the existing 10kN module. The use of i

From Plant process control

Sensors for tough tasks (1st September 2009)

Three ranges of high performance, pressure sensors from Kistler Instruments use a new double lip sealing method to eliminate the need for an O-ring seal to ensure accuracy and reliability where high temperature, vibrati

From Plant process control

Fit for small joins (1st September 2009)

Kistler Instruments' recently launched NCNT actuator system is designed specifically for assembling small components using interference fit joining methods. The actuator is said to be ideal for tasks assembling small an

From Plant process control

Getting the measure (1st September 2009)

A new modular 3-component dynamometer from Kistler Instruments, the Type 9129A, is designed for measuring machining forces up to 8kN during boring, cutting and turning operations. It is suited to analysing process capab

From Production engineering

Charge amplifier (1st July 2009)

With quality control systems relying increasingly on automatic monitoring of manufacturing processes, the Type 5073A charge amplifier from Kistler provides a flexible, reliable method of acquiring data from piezoelectric

From Plant process control

Training course (1st May 2009)

Kistler Instruments will be holding a one-day training course on the quality and productivity benefits of mould cavity pressure monitoring at Polymer Training, Telford on Tuesday, 16th June 2009.

From Production engineering

Miniature joining modules are sensitive & precise (1st March 2009)

The new NCFT Type 2157A electromechanical joining module from Kistler Instruments has been designed for applications where precise positioning and reliable repeatability must be combined with very small joining forces.

From Plant process control

Single wire technology (1st March 2009)

The increasing use of cavity pressure monitoring for quality assurance during the injection moulding of small products in multi-cavity moulds is making the installation of the sensors more difficult. To meet this challe

From Plant process control

Sensitive & precise joining modules (1st March 2009)

The new NCFT Type 2157A electromechanical joining module from Kistler Instruments has been designed for applications where precise positioning and reliable repeatability must be combined with very small joining forces.

From Production engineering

Piezoelectric sensors (1st January 2009)

Kistler Instruments has developed a range of five force sensors for quality assurance monitoring in assembly applications. The piezoelectric sensors cover measuring ranges from 5 to 120kN and are supplied as standard wi

From Production engineering

Predictive maintenance and quality (1st September 2008)

The line between predictive maintenance and quality assurance monitoring is becoming increasingly blurred as similar techniques are being used for both applications. Typical are car door latches that must be 100% inspe

From Plant process control

Pressure sensor (1st November 2007)

The Type RH pressure sensor from Kistler Instruments can measure the pressure of hot media up to 300°C directly and has the option of a 10mV/°C temperature output from the same sensor.

The sensor's construction, using a sili

From Plant process control

Torque sensor (1st November 2007)

The Type 4504A torque sensor from Kistler Instruments is suited to applications where space is at a premium and operating conditions are far from ideal. The sensor is exceptionally slim and its flangeto- flange configuration

From Plant process control

Ensures moulding precision (1st January 2007)

Irish injection moulder, Inmo-Tech, is one of the first companies to install a Kistler CoMo Injection cavity pressure monitoring system to ensure the dimensional precision of injection moulded components for the healthcare an

From Plant process control

Meganewton range press force (1st January 2007)

Designed specifically for in-situ measurement of press force in large presses, the new Type 9931A force sensors from Kistler are available in four types covering the measuring range from 50 to 20,000 kN. Compact, robust and e

From Production engineering

Nintendo Wii for lucky visitor (1st January 2007)

To mark the launch of a new range of industrial torque sensors, resulting from the takeover of Staiger Mohilo last year, Kistler Instruments will be presenting one of the new Nintendo Wii games consoles to a lucky visitor to

From Premises management maintenance

Simple to install sensors (1st November 2006)

The new range of five force sensors from Kistler Instruments has been developed specifically for use in production environments, especially for quality assurance monitoring in pressfit assembly applications.

The combination

From Production engineering

Quality assurance assured (1st July 2006)

ZF Steering Systems Nacam UK won a contract to supply steering columns for the Renault Modus and turned to Kistler Instruments to solve a quality assurance problem.

From Production engineering

Towards Zero Defects (1st May 2006)

CoMo Injection, developed by Kistler Instruments, is a new system that the company believes promises a major step towards true 'zero defect' production.

From Production engineering

Single-Wire Solution (1st May 2006)

Mould pressure sensors from Kistler now include indirect measurement and single-wire, replaceable cable, and have an increased maximum operating temperature of 200°C. The new sensors simplify installation and reduce service costs by allowing the conn

From Production engineering

New monitor (1st January 2006)

The Kistler CoMo Logic is a single channel instrument for monitoring time dependent parameters in both manual and automatic manufacturing, assembly and test processes.

From Premises management maintenance

Programmable charge amplifier (1st January 2006)

A programmable charge amplifier has been introduced by Kistler to provide a simple means of converting the charge output of piezoelectric transducers to a proportional voltage for control and recording purposes in manufacturing systems.

From Plant process control

Single-channel charge amplifier (1st September 2005)

A miniature, single-channel charge amplifier from Kistler converts the charge signal from all piezoelectric sensors into a proportional voltage signal.

From Plant process control

Monitors remotely (1st May 2005)

Kistler Instruments� CoMo View is a development of its CoMo New production process monitoring system. It has a built-in 5.7in colour touch-screen that displays process parameters in real time and gives operator access to the menu of pre-set process d

From Plant process control

New strain sensor has integrated electronics (1st September 2004)

Anew strain sensor from Kistler Instruments is designed for monitoring Cframe machine tools, such as presses and automatic assembly machines, preventing overload of mechanical presses, quality control of riveting, clinching and resistance spot weldin

From Production engineering

spot welding force tester (1st July 2004)

To meet the need for a simple to install and operate method of testing spot welding equipment, Kistler has introduced a clamping force tester that can be integrated with electrode cap machining and weld current checking to create an efficient service

From Production engineering