Infrared camera with PC application
September 1st 2007 Le Mark Group's Rescue Tape is a
self-fusing silicone repair tape with
no adhesive, it is suitable for
emergencies and all purpose
repairs on hoses, electrical wiring
and a variety of other surfaces.
When stretched and wrapped
under tension it fuses permanently
into one piece of silicone in
minutes, creating an air-tight,
water-tight seal that is resistant to
oils, fuels, acids, solvents, salt
water, road salt and UV rays. It can
be used in even the harshest
environments including high and
low temperatures, engine bays, oil
rich areas and even underwater
It works over wet, dirty or oily
services where ordinary tapes fail.
Insulating up to 8000 volts,
resisting up to 700psi and
operating up to 500F (2600C) and
below freezing, the tape is
available in two sizes – 25mm x
3.6m and 50mm x 10.8m
Infrared camera with PC application
The HotShot infrared camera from
Eurotron Instruments is integrated
with a PC application, which the
company says makes it a
new vision in thermal
imaging.
Simply create a list of
inspection points (or export
the list from your CMMS
database) and upload it to
your camera. HotShot will take
you through your list of inspection
points where you can capture
infrared and visible images.
It prompts you with suggestions
for diagnoses and
recommendations that are
customised for the equipment-type
at each location. When complete, it
automatically prints reports with IR
and visible images, location,
equipment type, diagnoses and
recommendations. More articles from Eurotron Instruments (UK) Ltd: | 
