John Guest Speedfit Ltd, Easy going round the bend

ipesearch.com

Click to visit http://sine.ni.com/cs/app/doc/p/id/cs-10795


	What next? Request further Information visit web site Send to friend John Guest Speedfit Ltd company's profile

Click to visit http://www.totalexhibition.com/ipe

Click to visit http://www.machinebuildingukshow.com

Click to visit http://www.mtecukshow.com

Click here for the latest compressed air news !

Easy going round the bend
March 1st 2007

Manifold Extension Connectors from Speedfit enable the user to install an underfloor heating pump pack into a corner position.

Where space is restricted, pump and manifold can be installed at 90░ to each other rather than in a straight line.

The range of manifolds has been extended so that it now runs between 4 and 12 zones. The Manifold Extension Kit allows the installer to add zones on an individual basis.

Connections to heating pipes are Speedfit Push Fit, allowing a simple, speedy installation.

The company says that all its underfloor heating products are designed for ease of installation.

More articles from John Guest Speedfit Ltd:

Push-fit solution (1st September 2009)

Airpac Bukom Oilfield Services, a division of Vp, hires equipment such as air compressors, steam generators, heat exchangers and sand filters to the oil and natural gas industries.

From Energy management

Swift air system upgrade (1st March 2009)

Airpac Bukom Oilfield Services, a division of Vp, hires equipment such as air compressors, steam generators and heat exchangers to the oil and natural gas industries.

From Plant process control

Instant supply (1st September 2008)

When Coventry-based VRS Automotive needed to install a new air supply system it decided to use the John Guest Push Fit System.

From Energy management

Pushing for air supply systems (1st May 2008)

After a reinvestment programme, VRS Automotive needed to install a new air supply system. The company had intended to use a 'galv' system but Stephen Hall, business development manager for John Guest advised that this

From Energy management

Improved plastic service valves (1st January 2007)

Speedfit has improved its range of Plastic Service Valves: the now have a chromium plated ball, delivering easier and more durable operation. The Speedfit x Speedfit pattern is also available in both 15mm and 22mm sizes with

From Plant process control

Plain sailing (1st July 2006)

Northshore in Chichester manufactures luxury yachts. To meet increasing demand, the company needed a new 10 000ft2 boat building premises.

From Plant process control

Free Sample Offer (1st November 2005)

In an exclusive offer Bosch Rexroth is giving away FREE samples of its new Octagon OCT cylinder series. In order to register for your free sample go to: www.ipesearch.com/bosch

From News

BT Rolatruc aims at âАШtrouble free operationsâАЩ (1st November 2005)

BT Rolatruc unveiled several brand new products and a new sense of purpose at the recent giant CeMAT exhibition held in Hanover, Germany.

From News

New Grip Technonlogy (1st November 2005)

At the recent A+A exhibition in Germany Ansell launched a revolutionary new glove coating that enhances grip performance when grasping wet or oily objects.

From News

A Gentle Reminder (1st November 2005)

New from Timestrip are its Timestrip smart labels that visually highlight important tasks and provide a continuous reminder of the time that has elapsed since a maintenance or other vital procedure was carried out.

From News

Mitsubishi launch MX4 (1st November 2005)

Mitsubishi ElectricâАЩs newly launched MX4 aM&T software will help industry as it looks to address the increasingly costly issues surrounding energy management.

From News

Brilliantly agile software (1st November 2005)

The Soft Sols Group newly launched Agility software claims to address the traditional concerns surrounding maintenance management software.

From News

Keeping up to Speed-Fit (1st September 2005)

John Guest is a bone fide British manufacturing success story. Ian Clay visited the company and discovered the processes behind the products

From Energy management

Makes it easier to extend (1st July 2005)

John Guest now offers a number of adaptors to make it easier to use its Push Fit fittings and pipe to extend or alter a galvanised system.

From Plant process control

Push fit pipework for easy installation (1st May 2005)

The John Guest Push Fit compressed air system provides installers of pipework with an easy and efficient solution that meets the need for increased energy efficiency.

From Energy management

Blue pipe (1st January 2005)

An aluminium pipe has been added by John Guest to its Push Fit System of pipes and fittings for compressed air.

From Energy management

Easy to make a connection (1st September 2004)

The John Guest Push Fit compressed air system provides installers of pipe work with an easy and efficient solution that is well suited to the modern demands of increased energy efficiency.

From Energy management

Quick to fit (1st September 2004)

The John Guest Push-Fit solution for compressed air systems provides a quick and easy way of installing pipework for air power. A permanent leakproof connection is made as soon as the pipe is pushed into the fitting.

From Energy management

LEAKPROOF SOLUTION (1st July 2004)

The John Guest compressed air system is made up of plastic push-in fittings and pipe colour-coded blue. It is said to be 100% leakproof all of the time and is light and easy to install.

From Energy management