E-T-A Circuit Breakers Ltd, Cost optimised Smart Power Relay

ipesearch.com

Click to visit http://motordemo.eriks.co.uk/control_main_form/control_main_form.php


	What next? Request further Information Send to friend E-T-A Circuit Breakers Ltd company's profile

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit www.maintenanceuk-expo.com

Cost optimised Smart Power Relay
November 1st 2006

E-T-A Circuit Breakers has introduced a cost-optimised version of its cubic-version Smart Power Relay, called the E-T-A E- 1048-8D, or DICE variant.

It combines the capability of a remotely controllable electronic load disconnecting relay with selflimiting characteristics, and optimised overcurrent protection similar to that of a high quality circuit breaker. Fitting standard automotive power relay sockets, the all-in-one solid-state power controller module replaces both an electromechanical relay, with inherent contact deterioration, and a blade fuse. It is suitable for wide ranging 12/24V DC applications where solenoids, motors or lamp loads have to be switched, protected or monitored.

The new E-T-A E-1048-8D Smart Power Relay is packaged in a 30mm x 30mm x 30mm housing for direct plug-in mounting to standard relay sockets. It is offered in nine different current ratings for use in ambient temperatures without the need for de-rating. The ENTRY version offers a short-circuit proof switching output in addition to the electronic relay function: the ENTRY-Protect version provides additional rapid electronic disconnection in the event of an overload.

More articles from E-T-A Circuit Breakers Ltd:

Rail-mounted double-pole electronic circuit breaker (1st January 2011)

Arail-mounted electronic circuit breaker – the E-T-A ESS22-T has been introduced by E-T-A Circuit Breakers.

From Plant process control

Control products (1st July 2006)

ETA Circuit Breakers has published separate CBE (Circuit Breaker for Equipment) and Control Products catalogues.The new CBE Catalogue now runs to over 500 pages. The 100 page increase reflects, in particular, the expansion of products offering electr

From Plant process control

IP68-protected level sensor (1st July 2006)

E-T-A Circuit Breakers has introduced an IP68-protected, capacitive level sensor that is suitable for monitoring de-ionised water in fuel cells and for monitoring aggressive liquids in the chemical industry.

From Plant process control

Remote disconnection (1st May 2006)

E-T-A Circuit Breakers has a new version of its magnetic circuit breaker which now offers remote disconnection by means of a sensor or control circuitry. The highest current carrying device of its type available, it is suitable for rack, panel or plu

From Plant process control

Breaker Aid (1st March 2006)

E-T-A Circuit Breakers has extended its range of electronic overcurrent protection products for automation applications with the ESX10 electronic circuit breaker.

From Plant process control

Flow monitor (1st January 2006)

E-T-A Circuit Breakers has introduced a new flow monitor and extended, push-fit monitoring head that, together, provide accurate flow measurement in larger pipe sizes as well as in pipes with thick walled insulation.

From Premises management maintenance

Non-contact level sensor (1st January 2006)

E-T-A Circuit Breakers has introduced a new tube sensor for non-contact, long-life detection and signalling of MIN or MAX liquid levels.

From Plant process control

ALL-IN-ONE POWER CONTROLLER (1st January 2004)

E-T-A Circuit Breakers has introduced a remote power controller, combining the capability of an electronic switching relay with self-limiting characteristics, and optimised overcurrent protection similar to that of a high quality circuit breaker. Opt

From Plant process control