Magnetrol International N.V., Transmitter device

ipesearch.com

Click to visit http://motordemo.eriks.co.uk/control_main_form/control_main_form.php


	What next? Request further Information visit web site Send to friend Magnetrol International N.V. company's profile

Click to visit www.maintenanceuk-expo.com

Click to visit sponsors web site

Click to visit sponsors web site

Transmitter device
March 1st 2011

The Magnetrol Eclipse 705 is type approved for steam drums, EN 12952-11 (water tube boilers) and EN 12953-9 (shell type boilers) as 'primary safety' and 'secondary safety'.

Combined with a 7MS probe, the device can be used in saturated steam applications at a pressure of 155 bar at an equivalent temperature of 345°C. Additional diagnostic tools allow the user to integrate this transmitter into safety instrument loops.With a Safe Failure Fraction (SFF) of 91%, the device is said to score amongst the highest safety levels.

It is possible to install two or even three Eclipse devices on one external cage for specific applications. Even when installing only two devices in one cage, a SIL3 safety level can be obtained.

More articles from Magnetrol International N.V.:

Meets EPA rule (1st January 2011)

The Thermatel Model TA2 Thermal Mass Flow Meter from Magnetrol International measures greenhouse gases in accordance with the US Environmental Protection Agency rule (EPA 40 CFR part 98), which requires companies emitti

From Plant process control

Thermal mass flow meter measures greenhouse gas (1st May 2010)

Magnetrol International's Thermatel Model TA2 Thermal Mass Flow Meter measures greenhouse gases in accordance with the new US Environmental Protection Agency rule (EPA 40 CFR part 98). This new mandate requires compani

From Plant process control

Keep it clean with liquid level measurement solutions (1st March 2010)

Supplier of level and flow instrumentation, Magnetrol International has added to its portfolio a range of liquid level instruments that are dedicated to servicing the needs of the life science and food & beverage indust

From Plant process control

Three-in-one (1st May 2008)

The hygienic Thermatel TD2 switches from Magnetrol International offer level, flow and interface capability in one device.

From Plant process control

Comms capabilities (1st March 2008)

Magnetrol's latest PACTware DTM is designed for use with Eclipse Model 705 with FOUNDATION Fieldbus communication.

From Plant process control

Radar solution (1st September 2007)

Magnetrol's Enhanced Eclipse Model 705 liquid level transmitter is now available with a coaxial GWR probe suitable for measuring liquids with a viscosity up to 1500 cP.

From Plant process control

Cool sensor (1st July 2007)

Magnetrol International has launched its new Echotel 961 liquid level switch. The latest stainless steel sensor handles process temperatures down to –80°C. It is made of standard 316/316L material with special potting

From Plant process control

High accuracy (1st May 2007)

Jupiter 200 from Magnetrol is a new magnetostrictive liquid level transmitter. With a SFF of>90%, the device is suitable for SIL 2 instrumented loops as a 1oo1 device and is said to exceed the rating of any other equ

From Plant process control

Transmitter approved (1st March 2007)

The second generation Eclipse 705, 2-wire Guided Wave Radar from Magnetrol is type approved to the latest European Norms for steam drums, EN 12952- 11 (water tube boilers) and EN 12953-9 (shell type boilers) as 'primary safet

From Energy management

Liquid launch (1st March 2006)

The new Echotel 940/941 series from Magnetrol is a compact liquid level switch for high and low level alarm that does not require any calibration. Simply wire up and it works. It is small, lightweight and has insertion lengths selectable from 3cm to

From Plant process control

EXTERNAL CAGE OPTIONS (1st May 2005)

The Eclipse guided wave radar from Magnetrol International is now available with optional external by-pass cage that is optimised for use with GWR technology.

From Plant process control