Milton Roy UK Ltd ( SITE NOW CLOSED, OPTIMUM DOSE

ipesearch.com

Click to visit http://www.eriks.co.uk/mtd/index.asp


	What next? Request further Information visit web site Send to friend Milton Roy UK Ltd ( SITE NOW CLOSED company's profile

Click here to visit
sponsor's
website

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://www.theenergyevent.com/

Click to visit http://www.healthandsafetyevents.co.uk

Click to visit sponsors web site

Click to visit sponsors web site

Click here for the latest compressed air news !

OPTIMUM DOSE
January 1st 2004

Milton Roy UK has introduced a simple, yet highly reliable electronic proportional flow control unit that contributes toward extremely accurate dosing when used with its G series of dosing pumps. Supplied ready for use, the Varipulse unit adjusts and controls flow rates in four operating modes: pulse; proportional speed (manual or automatic); and frequency variation. It operates on the principle of vector voltage control of electronics. This involves compensating for variations in power supply voltage by adjusting and generating a voltage and frequency to control a three-phase motor through a series of starts, without compromising performance over the entire operating range.

More articles from Milton Roy UK Ltd ( SITE NOW CLOSED:

Pumps for tough tasks (1st January 2007)

Dosing and metering applications in chemical, general process and oil production industries often involve hazardous fluids such as methanol and glycol which place tough demands on pumps.

Primeroyal dosing pumps from Milton R

From Plant process control

Dosing pump (1st July 2006)

The Primeroyal K pump is the latest addition to Milton Roy's dosing pump range and provides flow rates to 330L/h and pressures to 500bar.

From Plant process control

Mixer Range (1st May 2006)

Milton Roy Mixing provides a wide range of competitively priced mixers covering tank capacities from 0.5 to 400m3, along with a low or high speed options from 8 to 1500rpm.

From Plant process control

Pumped up (1st May 2006)

Flow rates of up to 310 litres/hour at maximum pressures of up to105 bar are delivered by the XB range of hydraulically actuated dosing pumps, available through Milton Roy. These pumps are interchangeable with other models in the MRoyB range, which m

From Plant process control

Pinch Valve (1st March 2006)

Pinch valves from Milton Roy UK are designed to provide optimum process efficiency, regardless of the potential problems arising from handling media that has a tendency to cake or clog.

From Plant process control

Pump control (1st January 2006)

A pump controller that helps to provide accurate dosing in applications requiring automated and proportional pumping, is now available from Milton Roy UK.

From Plant process control

Dosing pumps (1st January 2006)

Available from Milton Roy UK, Primeroyal dosing pumps are suited to tough metering applications in chemical, general process and oil production industries where hazardous fluids such as methanol and glycol need to be transferred.

From Plant process control

Robust pump for reliable dosing (1st November 2005)

The G series of mechanically actuated diaphragm pumps from Milton Roy provide reliable chemical dosing in demanding water treatment and industrial processes.

From Production engineering

Reliable dosing (1st September 2005)

Compact, low cost, hydraulically actuated diaphragm dosing pumps from Milton Roy UK are suitable for a wide range of industrial applications.

From Plant process control

Tough mix (1st July 2005)

Milton Roy Mixing offers a range of mixers suitable for complex processes or extreme conditions in water treatment and chemical applications, the largest of which provide up to 100 000m3 capacity.

From Production engineering

WIDE RANGE OF MIXERS (1st May 2005)

Milton Roy offers a range of mixers and technical support to help companies meet the requirements of most applications.

From Plant process control

VALVES KEEP LINES IN FULL FLOW (1st November 2004)

Ensuring full, uninterrupted flow in process lines can be difficult, especially where powders and granulars are being handled. Valves can become caked or clogged.

From Plant process control

IN CONTROL (1st September 2004)

A pump controller from Milton Roy UK helps provide accurate dosing regardless of power variations in applications requiring automated and proportional pumping.

From Plant process control

Mixer range suits most process applications (1st July 2004)

Specifying the right mixer, a function that is usually regarded as critical in most process applications, is of prime importance. Among the key considerations are: open or closed tank; tank capacity; impeller design; low or high speed mixing; and fac

From Plant process control

FOR TOUGH METERING TASKS (1st May 2004)

Liquids handling applications make increasingly tough demands on metering pumps and, to meet such demands, Milton Roy UK has developed its Primeroyal range of hydraulically-driven diaphragm liquid end dosing pumps.

From Plant process control