Busch (UK) Ltd, ATEX pump solution

ipesearch.com

Click to visit http://www.ni.com/vision/


	What next? Request further Information Send to friend Busch (UK) Ltd company's profile

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://air.irco.com/uk/

Click to visit sponsors web site

Click to visit sponsors web site

Machine Building 2009

MTec 2009

Click here for the latest compressed air news !

ATEX pump solution
May 1st 2005

A crypton coated, ATEXcertified, dry vacuum pump from Busch (UK) has been installed at Robinson Brothers’ factory in the West Midlands.

The NF.0160.A Cobra pump will work with a Hastelloy filter dryer for processes that involve methanol, isopropanol, toluene, acetic acid and traces of hydrochloric acid.

This chemical cocktail required a specialist vacuum pump to prevent corrosion, while still confirming with ATEX standards.

Cobra is said to be economical due to its low energy consumption. Its state of the art design conforms to Category 1 directive 94/9/EG (ATEX 100a) and it is available with various sealing options to suit the differing needs.

More articles from Busch (UK) Ltd:

Addition to Cobra range (1st March 2007)

Telford based Busch (UK) has announced a new addition to its Cobra range of screw vacuum pumps, designed for use in a wide variety of applications.

The Cobra NC 400 B is described by Busch as being robust in construction and

From Plant process control

Vacuum pump (1st September 2006)

The Dolphin LX close-coupled liquid ring pump range is available from Busch (UK) for a wide range of applications that require a vacuum pump.

From Plant process control

Cheese service (1st January 2006)

The Cheese Company manufactures a variety of cheeses at four of its five UK sites. It has recently recruited Busch to service its vacuum pumps and systems.

From Plant process control

Vacuum pumps (1st November 2005)

Three Busch RC1000B vacuum pumps have been supplied to Skretting of Invergordon, a company that produces fish feed pellets.

From Plant process control

Short & long term solution (1st September 2005)

Busch has resolved pump installation problems for speciality chemicals company Avecia. A Busch Cobra vacuum pump had been set up by a third party and did not adhere to installation guidelines. It had been installed at ground level and the exhaust pip

From Plant process control

Saves energy (1st July 2005)

A Busch Cobra TC2250 pump has been supplied to Johnson Matthey’s catalyst manufacturing plant at Billingham, Teesside, where it has been installed as part of the product purification process.

From Production engineering

ESSENTIAL UPGRADE (1st March 2005)

Busch (UK) has upgraded Huckepack 429 equipment at Lionel Hitchen (Essential Oils) to comply with the latest ATEX standards.

From Plant process control

Longer life (1st January 2005)

Busch (UK) offers side channel blowers for applications with pulsation-free vacuum or blast air demand. The Somos SB can be installed horizontally or vertically and replaces the company’s SE unit.

From Energy management

ATEX pump (1st July 2004)

The N Series Cobra pump from Busch is a dry-running, single screw, contact-free, progressive screw pump that maintains a constant temperature, resulting in less condensation and corrosion.

From Plant process control