Register | Login | Set as Home Page | Bookmark | General Enquiries | Help | Thursday, 24th of May 2012
IPE Logo
 ipesearch.com
Search 
Magazine 
Register for our ENewsletter
Click to visit http://motordemo.eriks.co.uk/control_main_form/control_main_form.php

What next?
 Request further Information    visit web site     Send to friend
 Alfa Laval Limited company's profile
Click to visit sponsors web site

Click to visit sponsors web site



Click to visit www.maintenanceuk-expo.com

Five steps to valve indication
September 1st 2006

IndiTop is a new, simple to set-up and use electrical feedback unit developed for use with Alfa Laval sanitary valves in the food, dairy, brewery and biopharm industries.

Designed with simplicity in mind, it can be set up from scratch with just five key strokes, or remotely from a PLC, once it has been mounted onto the valve stem and actuator.

Once in place, it immediately starts feeding back data about the valve's position. The unit employs a 'no touch' sensor system which requires no mechanical adjustments.

A magnet mounted on the valve stem and the axial magnetic field is detected by chips inside the sensor unit. By measuring the angle of each chip relative to the stem, the IndiTop can calculate the valve's position to an accuracy of 1mm.

More articles from Alfa Laval Limited: