Condition monitoring assures a cost effective way of substantially reducing breakdown risks (1st September 2008)

For every manufacturing organisation, breakdowns are a major concern. Not only can they be costly to remedy, they also result in lost production and disappointed customers. Fortunately, there is a convenient and cost-effect

From Plant process control

  Tools catalogue (1st July 2008)

As part of a strategic plan to expand Eriks UK's area of business to fit more closely with the Eriks Group's activities, the company is moving into the tools supply market.

From Production engineering

  Triumph for new seals (1st July 2008)

When Triumph Motorcycles required a new seal within a three month lead time, it turned to Pioneer Weston International (PWI), a division of ERIKS UK for the solution.

From Plant process control

  MRO – not a case study for DIY? (1st July 2008)

In these cost-conscious times, many manufacturers are looking for ways to rationalise their MRO stores and procurement activities. Even so, says Paul Jenno of Eriks UK, there are still those that are unaware of the substantial benefits that can be achieved by outsourcing this area

From Plant process control

Positive charge from Eriks+Wyko (26th March 2008)

Wyko officially becomes Eriks as of April this year. An intense period of activity has followed the Dutch outfit’s £139m purchase in November 2006, and according to marketing director, Steve Bodsworth, the acquisitive firm is eyeing further OEM targets within the UK...

From Newsletter Stories

  Chains and sprockets (1st March 2008)

Wyko, an Eriks company, distributes the Fenner Plus range of chain and sprockets.

From Plant process control

  Positive charge from Eriks+Wyko (1st March 2008)

Wyko officially becomes Eriks as of April this year. An intense period of activity has followed the Dutch outfit's £139m purchase in November 2006, according to marketing director, Steve Bodsworth, who describes the dea

From Plant process control

  Replacement hoses produced on site (1st November 2007)

Expensive downtime caused by hydraulic hose failures at Caterpillar's articulated truck manufacturing plant in Peterlee has been dramatically reduced by a straightforward, cost-effective solution implemented by Wyko, an Eriks

From Production engineering

  Thermography department (1st November 2007)

A new thermography department has been established by WYKO, an ERIKS Company. This new department will spearhead an energy saving initiative, aiming to help its customers meet their corporate social responsibility goals. WYKO

From Plant process control

New sealing division increases UK customer options (24th September 2007)

The launch of ERIKS Sealing Technology into the UK combines WYKO’s established seals business in the UK with the world wide experience of ERIKS...

From Newsletter Stories

  Erik's Sealing Technology launched (1st September 2007)

Eriks Sealing Technology has been launched in the UK. The new division is the combination of Wyko's established seals business in the UK with Eriks, a leader in the seals market. The division will provide a new option f

From Plant process control

Simple pulley test can improve drive efficiency by 10% (19th September 2006)

WYKO Industrial Services is offering every person who registers for the PEMEC show a free Fenner Pulley Groove guage that could improve the efficiency of a pulley drive system by 10%.

From Newsletter Stories

  Repair or replace? (1st May 2006)

The decision whether to 'Repair or Replace' rolling bearings in paper production equipment can be critical for profitability.

From Plant process control

Design optimum belt drives online (23rd March 2006)

Optimising belt drive systems at the design stage can contribute significantly to the operating life, reliability and overall efficiency of a belt drive system. The new Fenner Select on-line drive design assistant has been launched to provide enginee

From Newsletter Stories

  Maximum endurance (1st March 2006)

Wyko's motorsport team has supplied a range of bearing and sealing products for use in the development and campaigning of the Aston Martin DBR9 race cars in their first season back in racing.

From Plant process control

  Going solo: why less is more in hydraulics maintenance (1st January 2006)

When it comes to cost effective hydraulics maintenance, there's a case for employing the services of a single supplier that can provide both specialist hydraulics engineering support and all necessary products and components, claims WYKO Fluid Power

From Premises management maintenance

  Bearing supplier appointed (1st January 2006)

Wyko has signed a two-year contract to supply bearings and power transmission equipment to two M-Real paper mills at Kemsley and Sittingbourne.

From Production engineering

WYKO becomes nationwide WEG distributor (20th September 2005)

WYKO is now a national UK distributor and authorised repairer for WEG’s entire product range.

From Newsletter Stories

  An overlooked area for savings (1st May 2005)

Fans, pumps and HVAC systems receive an efficiency boost from belt drives

From Energy management

  Less hassle (1st May 2005)

Wyko’s Timken G-Power and MPower single point lubricators are gas and motorised devices that connect to grease or lubrication fittings and apply precise amounts of lubricant to bearings and other mechanical interfaces.

From Premises management maintenance

  Sound insulation (1st May 2005)

The new Paulstra Strasonic acoustic insulation systems from Wyko Industrial Services are designed to reduce airborne noise in industrial applications

From Health safety welfare

  Single-point lubricators boost bearing performance (1st January 2005)

Single-point lubricators have been introduced by Wyko to deliver enhanced bearing and machine performance.

From Plant process control

  Speedy repair to gearbox (1st January 2005)

Meeting a tight deadline, the Transline division of Wyko Industrial Services has repaired a speed increaser gearbox at a sewerage treatment plant in North London.

From Premises management maintenance

  Protects bolts (1st September 2004)

Available from Wyko, the new Loctite range of threadlock and sealant sticks allow engineers to protect bolts from seizing or loosening due to vibration, and can seal low pressure pipes on the spot with a minimum of mess.

From Premises management maintenance

  Sounding out savings (1st July 2004)

Ultrasonic detective work by Wyko at Toyota Manufacturing UKs Derbyshire plant has resulted in considerable energy and cost savings by eliminating air leaks.

From Energy management

  Cut maintenance downtime by half (1st March 2004)

The new compact split plummer block bearing from SRB (available through Wyko) is the first split cylindrical roller bearing assembly to be dimensionally interchangeable with standard SN and SD series plummer blocks, bringing the benefits of split des

From Plant process control