Crane Electronics Ltd, Torque aid

ipesearch.com

Click to visit http://www.eriks.co.uk/mtd/index.asp


	What next? Request further Information Send to friend Crane Electronics Ltd company's profile

Click here to visit
sponsor's
website

Click to visit http://www.theenergyevent.com/

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://www.healthandsafetyevents.co.uk

Click to visit sponsors web site

Click to visit sponsors web site

Click here for the latest compressed air news !

Torque aid
January 1st 2007

To ensure that mounting bolts are tightened to the correct angle andtorque, Alcon, a specialist manufacturer of brakes and clutches for motorsport and performance road vehicles opted for Crane Electronics' tool controller, TMAC Opta, with a rotary transducer, CheckStar.

In conjunction with a bespoke bar, the bolts of the brake caliper are tightened to the correct torque and angle. The TMAC Opta gives the operator a clear visual and acoustic indication when target and angle settings are achieved.

The tool controller records torque and angle readings, giving Alcon full product traceability.

More articles from Crane Electronics Ltd:

Torque control solution (1st September 2008)

Crane Electronics has supplied a TMAC Opta system with an IS WrenchMaster to a UK vehicle assembly plant, where a new torque application requires the accurate tightening of the exhaust manifold to its petrol engin

From Production engineering

Digital wrench (1st July 2008)

A major car manufacturer is now checking torque values of critical fastenings within its bodyshop, using ProWrench Opta digital torque wrenches, says Crane Electronics. The checks are carried out three times per shift u

From Production engineering

Tightening up procedure tightened (1st May 2008)

MAHLE Powertrain has used Crane Electronics' torque control products for over a decade and is upgrading its equipment with the latest generation of Crane products. "We assemble engines and typically check one in 50 e

From Production engineering

Torque tests (1st March 2008)

For production lineside testing, Bentley Motors in Crewe purchased from Crane Electronics' five MTTS (Mobile Torque Test Stations), with one being located in the engine build area and four in the final assembly a

From Production engineering

New angle and torque wrench range (1st November 2007)

Crane Electronics says its new angle and torque wrench, IQWrench Opta, is more simple to use and more versatile than a simple audit wrench. The wrenches cover a torque range from 0.1Nm to 1500Nm.

To achieve torque traceabili

From Plant process control

Wrench standards (1st September 2007)

Crane Electronics' 25 and 75Nm ProWrench Opta torque and angle wrenches now have homologation from a global car manufacturer, meaning that they satisfy the manufacturer's internal performance standards.

From Plant process control

Fixings tested for torque standards (1st July 2007)

In order to test fixings are of the correct quality and strength, a flatpack furniture manufacturer is using electronic torque tools supplied by Crane Electronics. The testing process can be divided into two elements.

From Plant process control

Testing trolley (1st May 2007)

Crane Electronics has a new mobile tool torque station. Highly manoeuvrable, the MTTS Opta is designed for production line-side testing of all continuous drive, impulse and hand torque tools in all types of industries

From Plant process control

Eliminates risk (1st March 2007)

In critical vehicle assembly work, it is essential that the correct torque tools selected for each fastening operation, and that all the joints are tightened to the exact torque. To carry out the work more quickly, easily and

From Production engineering

Tool tests save time (1st March 2007)

Ford Otosan's plant in Eskisehir, Turkey, producer of heavy trucks, engines and powertrain components has turned to Crane Electronics to reduce time spent on tool capability testing, purchasing a JRS Opta joint rate simulator

From Production engineering

Test bench for wrenches (1st November 2006)

Subject to frequent testing, mechanical torque wrenches can represent a cost efficient solution for certain production areas.

Crane Electronics has devised a Torque Test Bench which enables manufacturers to test their mechan

From Plant process control

Digital torque and angle wrench (1st September 2006)

A digital torque and angle wrench from Crane Electronics offers a high degree of accuracy for tightening safety critical joints.

From Plant process control

Covers wide torque range (1st July 2006)

A digital torque tester from Crane Electronics is able to cover the wide torque ranges found in the production environment and document torque readings either by data download or print out.

From Plant process control

Torque Test (1st May 2006)

Crane Electronics' CapStar II is the company's latest digital torque tester for accurate measurement of bottle top torque.

From Production engineering

Checking tube top tightness (1st March 2006)

The Body Shop buys openended tubes for toiletries with caps already fitted and checks a sample of caps for tightness using a CapStar from Crane Electronics.

From Production engineering

Tool Monitor (1st January 2006)

The TMAC Opta tool monitor and controller from Crane Electronics is a powerful and adaptable product for monitoring and controlling the torque of all transducerised air tools, whether automatic or electrical shut off tools. Control parameters may be

From Production engineering

Mobile test (1st November 2005)

The latest generation of Crane Electronics' Joint Rate Simulator (JRS Opta) provides a mobile testing solution from 2-500Nm.

From Production engineering

Torque management (1st September 2005)

Advanced torque control and management tools from Crane Electronics are helping Johnson Controls Automotive to produce high quality seats for Nissan vehicles made in Sunderland.

From Production engineering

WEB-BASED (1st July 2005)

Control Opta is a new assembly process management solution from Crane Electronics. It networks all torque measurement stations within an enterprise, enabling centralised real time SPC-based process control and giving complete torque traceability.

From Production engineering

NEW TECHNICAL DATASHEET (1st March 2005)

Crane Electronics� range of CheckStar rotary transducers are used for the dynamic torque and angle measurement of all continuous drive and impulse tools.

From Production engineering

Tool check triumph (1st November 2004)

At Triumph�s motorcycle factory in Hinckley, Crane Electronics� TorqueStar Opta torque indicators and data collectors calibrate click wrenches and power tools. Tools are checked for accuracy and repeatability using a custom-designed system based on T

From Production engineering

Joint kits (1st September 2004)

Literature is available from Crane Electronics detailing its new transducer joint kits.

From Production engineering

TALKS TO PC (1st July 2004)

New from Crane Electronics is the Opta Comms+ data management and software package. Designed for use with the companys TorqueStar Opta and DTT Opta torque instruments, it allows them to communicate with a pc to upload and download data and settings.

From Production engineering

For flexibility (1st March 2004)

The latest Crane Electronics torque indicator and data collector, TorqueStar Opta, aims to deliver maximum flexibility. This is achieved with a modular software construction enabling the customer to customise the device to more closely match requirem

From Production engineering