Edmolift UK Limited, Adding to low level powered access range

ipesearch.com

Click to visit http://motordemo.eriks.co.uk/control_main_form/control_main_form.php


	What next? Request further Information visit web site Send to friend Edmolift UK Limited company's profile

Click to visit www.maintenanceuk-expo.com

Click to visit sponsors web site

Click to visit sponsors web site

Adding to low level powered access range
September 1st 2011

New models signify the start of Edmolift's expansion into the low level powered access market.

The Air (Access Innovations range) incorporates three models from the company's Tzip micro access platform range: Air Micro, Air MicroLite and Air X2 scissor lift, as well as four new models.

The products are intended for use in 'clean locations', such as hospitals, offices and retailers, The compact lifts are suitable for confined areas and narrow aisle applications. The four new models have telescopic hydraulic masts with a choice of pusharound (Pilot and Pilot- XL models) or selfpropelled (Drive and Drive-XL models) chassis, with either 4.5 or 5m working heights.

Units are said to offer raised height stability, manoeuvrability and ease of use. A three year warranty is provided.

More articles from Edmolift UK Limited:

Tube heaters (1st November 2010)

Space-Ray has introduced a high efficiency line of ECA approved qualified gas-fired radiant linear and U-tube heaters with capacities from 23 to 47kW for a variety of industrial and commercial uses.

From Energy management

Compact cage (1st November 2009)

A supplier of low level access equipment, Edmolift, maker of the Tzip Micro, has launched MicroLite, a product designed specifically to access ceiling panels. Its cage is capable of passing cleanly through a 500mm sq

From Premises management maintenance

Compact & light (1st May 2009)

The Edmolift Tzip Micro has been developed as a direct response to the Working at Height regulations and can be used instead of ladders, steps and kick stools.

From Health safety welfare

New microsite (1st September 2008)

Further demonstrating its commitment to the logistics and distribution sectors, Edmolift has introduced a new microsite to target this specific area.

From Handling storing

Mini access platforms (30th July 2008)

Edmolift has introduced its first low-level access platform. The Edmolift T-zip has been developed as a direct response to the Working at Height Regulations and can be used instead of ladders, steps and kick stools...

From Newsletter Stories

Mini access platforms (1st July 2008)

Edmolift has introduced its first lowlevel access platform. The Edmolift T-zip has been developed as a direct response to the Working at Height Regulations and can be used instead of ladders, steps and kick stools.

From Premises management maintenance

Cost saving through investment (1st March 2006)

Investing in the latest manufacturing technology has enabled Edmolift to develop the CSeries economy range of scissor lift tables.

From Handling storing

Engine lift (1st September 2005)

A custom-designed scissor lift table from Edmolift is used at Bentley�s Crewe factory to handle engines for the company�s Bentley Continental GT.

From Handling storing

Handling injuries reduced (1st July 2005)

A range of convenience stores nationwide have reduced the risk of manual handling injuries and improved vehicle turn-around times since they installed low profile lorry loaders from Edmolift.

From Premises management maintenance

Ergonomic lift and tilt table (1st March 2005)

Edmolift has invested heavily in the development of its ALT series of lift and tilt tables. The results of this investment, it says, prove that the lift table industry still has a great deal of untapped potential.

From Health safety welfare

Custom made (1st September 2004)

When a risk assessment at Incentive Pharma UK highlighted a potential hazard caused by manual handling a large, awkward mixing vessel, the company contacted Edmolift for help.

From Handling storing