Cleanroom enclosure
July 1st 2009 Troax UK has designed and
installed high specification
cleanroom type enclosures at
the manufacturing facility of
an automotive manufacturer.
Excalibur double skin -
steel partitioning systems
were used to construct the
enclosures which form a
finishing area where vehicle
body shells are sanded down
by hand to ensure a high
quality finish. Each enclosure
has vacuum gullies built into
the floor, with specialist
extraction systems installed
to remove any dust produced
during the sanding process.
This ensures that a blemishfree,
high quality finish can
be achieved and dust is
prevented from contaminating
the rest of the factory floor.
Access for trolleys that
transport vehicle shells had
to be provided so Troax
designed bi-parting concertina
doors along the length of the
structure using its Sabre
single skin steel partitioning.
These fold back to one side
to allow access for the trolleys. More articles from Lee Manufacturing Limited (TROAX Group): | 
