Register | Login | Set as Home Page | Bookmark | General Enquiries | Help | Thursday, 24th of May 2012
IPE Logo
 ipesearch.com
Search 
Magazine 
Register for our ENewsletter
Click to visit http://motordemo.eriks.co.uk/control_main_form/control_main_form.php

Click to visit www.maintenanceuk-expo.com



Click to visit sponsors web site

Click to visit sponsors web site

Partitioning used for lab
September 1st 2008

Toledo modular cleanroom partitioning from Troax UK has been used to create a global R&D laboratory at the Sandvik Hard Materials manufacturing facility in Coventry.

The seven laboratories have two large, flush-glazed vision panels around their entire perimeter to create clear viewing areas for staff outside the cleanrooms.

Sliding doors, also constructed by Toledo panels and incorporating circular, stainless steel frame vision apertures, have also been installed.

Troax worked on the project with contractor Martins' Fixings, who installed the partitioning.

The company's Tony Gavin comments "Because of its modular design Toledo partitioning is extremely versatile; it's simple to install and can be easily demounted if layouts need to be altered in the future, which was an important consideration for Sandvik." The Toledo system is produced in steel, monobloc construction and uses an inert and non-particle shedding infill finish.

More articles from Lee Manufacturing Limited (TROAX Group):