Register | Login | Set as Home Page | Bookmark | General Enquiries | Help | Sunday, 05th of July 2009
IPE Logo
ipesearch.com
Search 
Magazine 
Register for our ENewsletter
Click to visit http://www.eriks.co.uk/mtd/index.asp
What next?
 Request further Information    visit web site     Send to friend
 Kee Safety Limited company's profile
Click here to visit 
sponsor's 
website


Click to visit http://www.healthandsafetyevents.co.uk

Click to visit sponsors web site



Click to visit http://www.theenergyevent.com/

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit sponsors web site






Click here for the latest compressed air news !

Time-saving
July 1st 2005

To speed installation and reduce costs, Kee Klamp has developed a new rail fitting as a standard component of its KeeGuard roof edge protection system.

The fitting allows the KeeGuard system’s horizontal guardrail to be placed in the saddle of the open fitting, rather than through it, before being secured with a grub screw.

The company says this makes assembly up to twice as fast as conventional roof edge protection systems and reduces on-site installation complexity and cost.

The system remains compliant with EN 14122 for permanent barriers and provides collective rather than personal protection.

The three pre-fabricated components are a main upright, a main counterbalance and a free end assembly where no wall fixing is available.

More articles from Kee Safety Limited: