Wanner International Ltd, Coolant Pump

ipesearch.com

Click to visit http://motordemo.eriks.co.uk/control_main_form/control_main_form.php


	What next? Request further Information visit web site Send to friend Wanner International Ltd company's profile

Click to visit www.maintenanceuk-expo.com

Coolant Pump
November 1st 2005

Wanner International says its Hydra-Cell seal-less coolant pumps are unaffected by recirculating fines in dirty coolant that can destroy rotary and piston pumps. The company believes that filtration systems can now be designed to meet the requirements of the machine process rather than the coolant pump.

The Hydra-Cell pump is low maintenance and can be run dry without damage. As the pumps do not use coolant to lubricate or cool the pump, almost any type of coolant can be pumped, including solvent-based ones, non-lubricating, eco-friendly, water-mix fluids and neat oils.

As the Hydra-Cell is a positive displacement pump, coolant flow can be changed by changing the speed of the pump shaft. There is no need for wasteful fluid bypass when changing to a tool with reduced coolant flow needs.

More articles from Wanner International Ltd:

No need for dampeners (1st March 2012)

The multi-diaphragm arrangement of the Hydra-Cell metering & dosing pump is claimed to remove the need for pulsation dampeners in many circumstances.

From Plant process control

For harsh liquids (1st July 2010)

Seal-less design enables Wanner's Hydra-Cell pumps to handle most liquids over pressures ranging from very low to 70 bar and above. Some models are rated to 170 bar.

From Plant process control

atex pumps (1st July 2004)

Following completion of the atex conformity assessment procedure involving a risk analysis and evaluation, Wanner Hydra-Cell pumps have been awarded atex certification.

From Plant process control