ECODISC C/o Elfab Limited, New detector

ipesearch.com

Click to visit http://www.eriks.co.uk/mtd/page3.asp


	What next? Request further Information visit web site Send to friend ECODISC C/o Elfab Limited company's profile

Click here to visit CGFS's website

Click here to visit DFM Media's website

Click to visit sponsors web site

Click to visit http://www.totalexhibition.com/ipe

Click to visit http://www.machinebuildingukshow.com

Click to visit http://www.mtecukshow.com

Click here for the latest compressed air news !

New detector
July 1st 2005

Elfab‘s new, non-invasive and reusable detector meets the ATEX Directive (Atmospheres Explosible) 94/9/EC. Using the intrinsic safety method of protection it has been awarded the highest level of protection for electrical equipment for use in explosive atmospheres.

Integral Flo-Tel is installed on the vent side of bursting disc devices and is activated by operation of the disc. During operation, a magnet arcs away from its rest position, removing the magnetic field from a sensor, and comes to rest in a position that no longer influences the sensor. This causes the sensor to switch to fail-safe condition on an open circuit and a latched alarm condition is the result.

More articles from ECODISC C/o Elfab Limited:

Approval for aid (1st July 2009)

Elfab has been awarded ATEX

From Efficient Maintenance

3 minute film (1st July 2009)

A 3min film from Elfab shows the entire rupture disc installation process – from removing an old disc, through fitting its replacement, to correctly tightening the pipework.

From Health safety welfare

Five languages (1st May 2009)

According to Elfab, its new website – www.elfab.com – is the only one in the rupture disc industry to be fully translated into five European languages: English, French, Spanish, Italian and Russian.

From Health safety welfare

Disc status monitoring (1st March 2009)

Manufacturer of rupture discs, Elfab, has launched what is believed to be the first ATEX-approved burst detection system, Radio-Tel. The new system combines the latest wireless technology with Elfab's proven noninvasive

From Plant process control

Burst detection system (1st January 2009)

Elfab's ATEX-approved burst detection system, Radio-Tel, combines wireless technology with Flo-Tel +, the company's noninvasive detection system.

From Plant process control

Aid for disc installation (1st November 2008)

Manufacturer of bursting discs, Elfab, has launched a new installation aid. Test-Tel is designed to confirm correct disc installation, as well as ensuring the proper fitting of the ATEX-approved detection system, Flo-Te

From Health safety welfare

Burst detection system launch (1st July 2008)

Elfab has launched Radio-Tel, an ATEX-approved burst detection system. The new system combines wireless technology with Elfab's non-invasive detection system, Flo- Tel+.

From Plant process control

Bursting discs for the modern engineer (1st July 2007)

In recent years, requirements for an efficient, flexible process plant have forced plant engineers to look beyond the simple bursting disc and consider pressure-relief systems that are compatible with wider business issue

From Plant process control

Low-pressure bursting disc (1st November 2006)

The latest addition to Elfab's Opti- Gard range has been developed specifically for low-pressure applications from 2psig.

Opti-Gard SoLo is described by Elfab as 'the most technically- advanced, reverse-acting bursting disc

From Plant process control

New holders for bursting discs (1st March 2006)

Universal, slimline holders have been introduced by Elfab for its bursting disc range.

From Plant process control

Non-invasive Burst Detection (1st January 2006)

Lucite International (LI), supplier of Methyl Methacrylate is using pressure management systems from Elfab to safeguard production processes at its Billingham site in stockton-on-Tees.

From Plant process control

BURST SENSOR (1st September 2005)

Elfab now fits its ATEX-approved, non-invasive and reusable Integral Flo-Tel sensor to Opti-Gard, Safe- Gard, Posi-Gard, Vac-Gard, Arma- Gard, bursting panels and flat and domed composite discs.

From Plant process control

SIMPLE PRESSURE RELIEF (1st May 2005)

Elfab has launched a new range of bursting disc plugs that have been developed to provide standard, simple-to-install pressure relief.

From Plant process control

Elfab discs improve safety (1st March 2005)

Speciality chemicals manufacturer Rohm and Haas, in conjunction with engineering partner ABB, has installed Elfab Amourgraph graphite bursting discs with Integral Flo-Tel detection.

From Plant process control

BURST-PANEL (1st January 2005)

Elfab has extended its Flo-Tel burst-detection range into the bursting panel market with the introduction of Panel Flo-Tel.

From Health safety welfare

For hygienic pressure relief (1st November 2004)

Elfab has developed a pressure relief system for use in aseptic and hygienic process conditions.

From Health safety welfare

Double disc solution (1st July 2004)

A pressure-relief assembly has been designed by Elfab to prevent environmental contamination in severe process conditions.

From Plant process control

Disc contract (1st July 2004)

Elfab has signed a preferred supplier partnership with GlaxoSmithKline Cork. The two-year agreement confirms Elfab as the exclusive supplier of bursting disc and detection systems to GSKs primary manufacturing facilities in Ireland.

From Plant process control