Auto tool change (1st March 2012)

XYZ Machine Tools will present its new ProtoTRAK LPM (Lean Production Machine), the first ProtoTRAK-equipped machine tool to be fitted with an automatic tool changer. The ATC can hold up to 16 tools and this 15 hp/8000

From Production engineering

  Auto tool change (1st March 2012)

XYZ Machine Tools will present its new ProtoTRAK LPM (Lean Production Machine), the first ProtoTRAK-equipped machine tool to be fitted with an automatic tool changer. The ATC can hold up to 16 tools and this 15 hp/8000

From Production engineering

  Single set-up system (1st March 2012)

Ash Safety assembles, services and hires out safety equipment, and provides City & Guilds-accredited training for users. However, company founder André Beard decided recently to move into the world of manufacturing.

From Production engineering

  A move to CNC machining (1st January 2012)

Spa Aluminium has installed an XYZ ProtoTRAK LPM (Lean Production Machine).

From Production engineering

  Step-by-step approach to programming CNC machines (1st January 2012)

XYZ Machine Tools will be setting out its step-by-step approach to programming CNC machines.

From Production engineering

  Geared up for growth (1st September 2011)

Chris Hannam is a motor cycle drag racer who set a world record for the fastestever 'wheelie' – 168 mph on a turbocharged Suzuki Bandit running on C16 racing fuel.

From Production engineering

  Lathe halves cycle time (1st May 2011)

HiSpec Motorsport produces good quality, high performance braking products at prices that appeal to the general road user, the kit car enthusiast, the racer and the track day fan.

From Production engineering

  From design to reality (1st May 2011)

About £1m has been invested in engineering equipment at the JCB Academy, the UK's first University Technical College dedicated to engineering, including top-end IT hardware, 3D design technology and several CNC/manual l

From Production engineering

  Model VMC application (1st March 2011)

Precision engineering business, Kontax Engineering specialises in producing some of the world's smallest commercially available Stirling engines, which are typically around 15cm high.

From Production engineering

  Showing that CNC machining is accessible to everyone (1st January 2011)

Aspecialist in metalcutting machine tools for prototype and low volume applications, XYZ Machine Tools puts the emphasis on performance, value for money, and high standards of service. The company's portfolio includes

From Production engineering

  Turnell & Odell turns to XYZ (1st January 2011)

Specialising in precision machining and fabrication, sub-contractor Turnell & Odell caters for prototype development and batch production work, while also providing an emergency breakdown repair service for process cr

From Production engineering

  Ease of programming (1st September 2010)

Subcontract business, C J Engineering, first invested in a CNC/manual mill in 2000.

From Production engineering

  In-house cnc machining (1st July 2010)

Reeling Systems is a primary the finished wall thickness.

From Production engineering

  CNC machine tools provide a model solution (1st May 2010)

Model Products specialises in making complex engineering models for business purposes.Many of the models produced are working prototypes and require complex, often quite large, metal components to be machined.

From Production engineering

  Versatility from VMC (1st March 2010)

Five years after setting up a mould tool making business Dave Bowyer and Steve Riddle took delivery of a ProtoTRAK turret mill, the first of several CNC/manual mills and lathes from XYZ Machine Tools. Sterling Product

From Production engineering

  Small size,big performance (1st January 2010)

Chris Giles of Air Time CNC in Oxfordshire is a successful musician who now devotes his working life to designing and making components for jet skis, helped by a Mini Mill from XYZ Machine Tools.

From Production engineering

  Compact cnc machine tools (1st November 2009)

In August of this year Bletchley-based K+K Specialised Engineering moved into new premises to accommodate additional CNC machine tools and allow for further expansion.

From Production engineering

  Extra large CNC lathe (1st September 2009)

Less than a week after the installation of an XYZ XL1500 extra large CNC lathe, Kristek Precision secured an ongoing order for large stainless steel seal rings for the power generation industry, none of which could be

From Production engineering

  Compact vertical machining centre (1st July 2009)

CNC Heads combines engineering technology with hands-on race experience to design, replicate and manufacture cylinder heads for race and road cars.

From Production engineering

  CNC bed mill & compact turning centre (1st May 2009)

Northampton-based Duotech provides precision mould tools to produce expanded polystyrene and expanded polypropylene mouldings.

From Production engineering

  Compact grinder with large table (1st March 2009)

Kevin Hibbert, director and co-owner of M.H.V. Products, says he decided to buy a surface grinder from XYZ Machine Tools because for one particular contract he needed a relatively large table on a relatively compact m

From Production engineering

  Training the trainer (1st January 2009)

Having the knowledge and skill to operate a machine tool is only half the story when it comes to passing on expertise to others. Equally important, according to Nigel Atherton, MD of XYZ Machine Tools, is the ability of

From Production engineering

  Turning centre (1st May 2008)

Occupying just 1700mm (W) by 1450mm (D), the new XYZ Compact Turn 52 is the smallest model in XYZ Machine Tools range of turning centres.

From Production engineering

  CNC for toolmaker (1st January 2008)

Expansion at toolmaker CSProducts has led to a switch from manual to CNC machining.

From Production engineering

  CNC for toolmaker (1st January 2008)

Expansion at toolmaker CSProducts has led to a switch from manual to CNC machining.

From Production engineering

  Compact and easy-to-use (1st September 2007)

Combining metalcutting with fabrication has paid dividends at Swift Precision in Pinxton, Nottinghamshire.

From Production engineering

  Five-axis capability (1st July 2007)

SFM Technology has installed a BRM 80-150 CNC bridge mill from XYZ Machine Tools, equipped with a five-axis spindle head, a Delcam PowerMill CAD/CAM system, and a Faro seven-axis articulated portable arm CMN with Del

From Production engineering

  High-speed VMC (1st May 2007)

BK Tooling has invested in a 12,000 rev/min, 43 m/min rapid traverse 1060 HS vertical machining centre from XYZ Machine Tools.

From Production engineering

  Turning centre technology (1st November 2006)

Metalworking sub-contractor, Metaltech Precision in Somerset turns, mills, grinds, fabricates, shotblasts, paints, assembles and tests for well-known names in the medical, aerospace, petrochemical and printing industries.

To

From Production engineering

  Hitting all the right notes (1st September 2006)

Every chrome-plated brass comb at Antony Dannecker's harmonica business is machined by M&M Precision Engineering, a 10-strong sub-contract company that relies on machine tools supplied by XYZ Machine Tools.

From Production engineering

  Tool brochure (1st July 2006)

The entire range of machine tools and ancillary equipment distributed by XYZ Machine Tools is highlighted in the company's Product Range 2006-2007 brochure.

From Production engineering

  A quality role (1st May 2006)

Martin Bruton has been appointed manufacturing and quality manager at XYZ Machine Tools.

From Production engineering

  It's business as usual (1st March 2006)

The long-standing relationship between XYZ Machine Tools and Southwestern Industries which designs and manufactures the ProtoTRAK controls fitted to XYZ's manual/CNC lathes and turret/bed mills, has taken a step forward with the US company's acquisit

From Production engineering

  New for MACH (1st March 2006)

XYZ Machine Tools' 368 sq.m stand at MACH 2006 will be home to 23 machine tools, several of them making their exhibition debuts. However, this year will see a change of emphasis in terms of stand design and layout, with XYZ determined to highlight th

From Production engineering

  Smaller VMC (1st September 2005)

XYZ Machine Tools has added a smaller, low cost vertical machining centre to its range. The new 7.5HP, 60 to 8000rev/min Mini Mill 450 features a solid cast construction, weighs 1900kg and has a footprint of 1.8 by 1.6m.

From Production engineering

  What makes a successful service engineer? (1st March 2005)

Service engineers are the unsung heroes when it comes to keeping the wheels of industry turning.

From Production engineering

  Manual/CNC mill (1st November 2004)

An XYZ Edge 1500 manual/CNC turret mill with 1066mm by 228mm table has been installed in one of the machine shops at Maycast- Nokes Precision Engineering to cut down the setting and run times for small batch work.

From Production engineering