3DX-Ray Ltd, X-rays blister packs

ipesearch.com

Click to visit http://www.eriks.co.uk/mtd/index.asp


	What next? Request further Information visit web site Send to friend 3DX-Ray Ltd company's profile

Click here to visit
sponsor's
website

Click to visit sponsors web site

Click to visit http://www.healthandsafetyevents.co.uk

Click to visit http://www.theenergyevent.com/

Click here for the latest compressed air news !

X-rays blister packs
January 1st 2007

As the pharmaceutical industry moves towards 100% verification, the problem of checking billions of unitary dose blister packs is a large one. A blister without its tablet or capsule is not only a health risk to the patient, it can be a liability issue for the drug supplier.

One solution is X-Line from 3DXRay.

An advanced x-ray imaging system, it offers imaging, measurement and analysis in both 2 and 3D. It can integrate with an existing QC, SPC or pass/fail system, making choices based on sophisticated decision-based criteria. The company says it is able to do this at a fraction of the cost of conventional x-ray systems due to its line-scan technology which eliminates the need for 'area' detectors.

The automated in-line inspection tool is suitable for inspection of smaller items on production lines.

It can image through the foil often used on blister packs and can detect tablets even when they are moving past at 400 blisters per minute on a conveyor belt.

More articles from 3DX-Ray Ltd:

Battery inspection (1st March 2009)

3DX-Ray has customised its DEX x-ray vision and analysis technology to inspect Boston Power's new Sonata lithium-ion battery.

From Plant process control

Vision system (1st January 2009)

3DX-RAY has the technology to measure and analyse, nondestructively, the microscopically thin and expensive coatings and fills in diesel particulate filters and catalytic converters. It can also measure distributions of

From Production engineering

Internal 3d x-ray inspections (1st November 2008)

3DX-RAY's MDXi x-ray analysis and inspection system is an integrated, transportable, turn-key, measurement and vision system that offers advanced x-ray imaging capabilities and fault detection.

From Production engineering

3d x-ray system (1st March 2008)

3DX-Ray's new x-ray vision inspection system can be wheeled around a factory to cope with fastchanging demands. The MDXi is self-contained but can be easily linked into a factory system. It works in both batch mode or a

From Production engineering

Provides inline x-ray inspection (1st January 2008)

Prompted by the growing need for 100% fault-free devices, 3DX-Ray has introduced X-Line, an inline xray inspection, measurement and QC system accurate enough to check the precise alignment of both needles and devi

From Production engineering

In-line x-ray inspection (1st November 2007)

X-Line, from 3DX-RAY, is an automated, in-line, x-ray inspection, measurement and QC system that links directly into most factory SCADA or SPC systems. It produces a series of precise 3D measurements and checks the size, dept

From Production engineering

Flexible batch inspection in 2 and 3D (15th December 2006)

MDXi is a flexible batch inspection system that offers conventional 2D x-ray imaging and a 3D X-ray system that can check internal components and alignments to an accuracy of around 100 microns. It can be used off-line and in-line � and can even build, measure and display a full 3D image of an internal structure in the same way as a CAT scan but at a fraction of the cost.

From Newsletter Stories

Flexible batch inspection (1st November 2006)

MDXi, from 3DX-Ray, is a flexible batch inspection system that offers conventional 2D x-ray imaging and a 3D X-ray system that can check internal components and alignments to an accuracy of around 100 microns. It can be used

From Production engineering

The inside story (1st July 2006)

X-Line, from 3DX-Ray, is an automated in-line X-ray inspection, measurement and QC system that offers complete internal imaging of anything on a production line from a blister pack to a finished metal, plastic or composite product. It lets you check

From Production engineering