Spirol Industries Limited, New guide

ipesearch.com

Click to visit http://www.eriks.co.uk/mtd/index.asp


	What next? Request further Information visit web site Send to friend Spirol Industries Limited company's profile

Click here to visit
sponsor's
website

Click to visit sponsors web site

Click to visit http://www.theenergyevent.com/

Click to visit http://www.healthandsafetyevents.co.uk

Click here for the latest compressed air news !

New guide
September 1st 2005

High Performance Solutions for Automotive Applications is a new guide from Spirol Industries. It details the vast number of potential applications for the company’s products throughout a typical vehicle. These range from safety critical assemblies such as brake and clutch master cylinders through to door trims and sun roofs.

The company believes these products can provide a potentially technically superior solution with an installed cost lower than alternative types of fasteners.

Coiled pins, threaded inserts, dowel bushings, compression limiters, slotted and solid pins can be supplied.

Free samples and free engineering support are offered to automotive industry suppliers.

More articles from Spirol Industries Limited:

Plastic inserts (1st May 2009)

During any engineering assembly process, plastic inserts can provide secure, tight threaded joints.

From Production engineering

Fastening guide (1st January 2008)

Spirol Industries provides a range of engineering products and services designed to ensure customers achieve the optimum fastening solution for their assembly at the lowest cost.

From Production engineering

Springing a solution (1st November 2007)

Use of standard duty coiled pins as hinge pins in a circular saw blade guard application was causing problems during manufacture due to excessively high insertion forces.

From Production engineering

Special pin design (1st September 2007)

To solve a problem faced by a manufacturer of diesel fuel injection assemblies, Spirol has developed a special helical grooved pin.

From Plant process control

Latch pins (1st May 2007)

Spirol Industries has introduced a range of Latch Pins which have been designed for larger plastic hinge applications.

From Production engineering

Guide to solid pins (1st November 2006)

Spirol Industries has introduced a new Guide to Solid Pins. It provides design and application information on the company's range of standard solid pins and predesigned special helical grooved pins. Details of customised pin

From Production engineering

Self-tapping (1st July 2006)

A self-tapping range of inserts is available from Spirol for use with most plastics, including thermosets, providing a high and consistent pull-out strength.

From Production engineering

More spacers (1st May 2006)

The Spirol range of spacers is produced from strip metal into rolled formed tubes. The range is available in both low carbon steel and aluminium in sizes from 3 to 24mm ID. Both standard and heavy duty wall versions are available.

From Production engineering

Spring pins (1st March 2006)

Spirol Industries believes its range of metric and imperial standard coiled spring pins to be the widest available from any supplier in terms of size and material.

From Production engineering

Disc springs (1st January 2006)

Spirol Industries believes the Bissell disc spring range to be one of the most comprehensive in terms of standard and special ranges, sizes, potential applications and materials.

From Plant process control

Coiled spring PIN additions (1st November 2005)

Additions have been made to both the metric and imperial standard coiled spring pins available from Spirol Industries.

From Production engineering

COMPACTS PIN DOWN COSTS (1st November 2004)

Coil pins from Spirol Industries have been specified for the hinges of a new line of cosmetic compacts to help reduce costs.

From Production engineering

MORE EXPANSION INSERTS (1st September 2004)

Literature is available from Spirol Industries on its latest line of expansion inserts. These are intended for strengthening plastic joints.

From Production engineering