Huntingdon Fusion Techniques Ltd, Purging system for high temperatures

ipesearch.com

Click to visit http://motordemo.eriks.co.uk/control_main_form/control_main_form.php


	What next? Request further Information visit web site Send to friend Huntingdon Fusion Techniques Ltd company's profile

Click to visit sponsors web site

Click to visit www.maintenanceuk-expo.com

Click to visit sponsors web site

Click to visit sponsors web site

Purging system for high temperatures
March 1st 2006

Huntingdon Fusion Techniques (HFT) has witnessed a significant growth in orders for weld purge systems capable of withstanding the higher temperatures used during preheating of welds.

Recent orders from the USA and Spain for systems covering the range 500 to 750mm (20 to 30 inches) diameter have been received to allow the use of pre-heat temperatures to 300°C for 24hours.

The purge systems are an extension of the standard HFT product line and incorporate a thermally resistant covering on the inflatable sections over the product.

More articles from Huntingdon Fusion Techniques Ltd:

Tape gets backing (1st January 2010)

Huntingdon Fusion Techniques has published a four-page leaflet about Weld Backing Tape. The product is placed on the backside of a weld to help save costs. Three different grades are available to permit arc welding up t

From Production engineering

Billionth arc struck (1st November 2009)

Since its development team designed a Tungsten Electrode over 25 years ago,Huntingdon Fusion Techniques (HFT) calculates that more than 1 billion arcs have now been struck with them.

From Production engineering

All about tape (1st July 2009)

A four-page leaflet ab out Weld Backing Tape is available from Huntingdon Fusion Techniques.

From Production engineering

Show success (1st May 2009)

It was good news for Huntingdon Fusion Techniques at the annual American Welding Society Exhibition. The lead engineer for the Bechtel/Bioku Island LNG project in Equatorial Guinea walked onto the stand of Cob Industrie

From Production engineering

Resistance welding gauge (1st January 2008)

The automotive industry is a major user of resistance welding equipment, most of it installed under robot control. It is essential that the equipment installed to produce these welds is continuously and accurately moni

From Production engineering

Trailing shields (1st September 2004)

When using purge gas, normally argon, to protect welds from oxidisation, the area of hot metal behind the torch is often ignored and this can lead to bad welds.

From Production engineering

Inflatable flow stopper (1st January 2004)

A simple, low cost method of preventing the flow of liquids in pipes is available from Huntingdon Fusion. Inflatable pipe stoppers are suitable for pipes from 50 to 2000 mm dia and come in a variety of shapes, including pancake style, sausage shape,

From Plant process control