Welding details (1st May 2009)

The full range of Murex arc and gas welding equipment has been brought together in a 56-page, A4 catalogue.

From Production engineering

  Welding guide (1st March 2009)

The applications of TIG (tungsten inert gas) welding and pointers to its successful use are the subject of a new TIG Welding Guide from Murex Welding Products.

From Production engineering

  TIG welders on offer (1st March 2009)

Designed for a wide range of TIG welding applications, Tradestig AC220 and AC220a compact welding units are the subject of a price promotion by Murex Welding Products during April 2009.

From Production engineering

  MIG torches (1st January 2009)

The latest range of MIG welding torches from Murex offers good feedability, positive grip and fingertip control, even when wearing gloves.

From Production engineering

  Mig welders (1st November 2008)

Murex Welding Products' range of Transmig industrial welding power sources includes the 326S, 406S and 406SW power sources for MIG, MAG and flux cored wire applications. They use simple threephase switch and tap technol

From Production engineering

  Heavy duty role (1st September 2008)

The Murex Transmig 300C and 350C step-controlled compact welding machines can be used for medium or heavy-duty MIG or MAG welding. Strongly built with galvanised housings, they are designed for use in harsh industrial

From Production engineering

  Arc welding solutions (1st July 2008)

The latest welding units in the Murex Tradesarc feature large cable connectors for durability and an impact resistant polymer and aluminium casing.

From Production engineering

Replacement recommendations for regulators and flashback arrestors (27th June 2008)

All those involved in gas welding and cutting are reminded by Murex Welding Products that the elastomeric components of pressure regulators and flashback arrestors will deteriorate with age. This can result in units failing in service, resulting in a discharge of gas from the over-pressure relief valve and the creation of potentially unsafe indoor working environments...

From Newsletter Stories

  Compact units (1st May 2008)

Suitable for heavy duty and medium MIG and MAG welding applications, the Murex Transmig 300C and 350C step-controlled compact machines feature sturdy construction and galvanised housings.

From Production engineering

  All about gas (1st March 2008)

Murex Welding Products has announced dates for its City & Guilds of London Accredited Gas Equipment Inspection Courses.

From Health safety welfare

  Fit and forget (1st March 2008)

The new Murex Saffire 300 series regulator for MIG welding is said to be a true 'fit and forget' solution that gives stable control of gas flow rates. It includes a number of safety and control features that ensure a st

From Health safety welfare

  Plan for 2008 (1st January 2008)

Murex has a number of its 2008 Welding Product wall planners to give away on a first-come, first served basis, along with a Murex branded pen for anyone requesting its Saffire Gas Welding and cutting equipment brochure.

From Production engineering

  Light duty welding (1st November 2007)

Light duty welding tasks in body shops or around the farm require simple to use and versatile welding equipment. Murex says it has the answer with its Tradesmig 140-1 unit that weighs just 25kg. A single phase 230V welding ma

From Production engineering

  Multi and single stage (1st September 2007)

The Murex range of Saffire high pressure regulators includes both Multi-stage and single-stage versions. They provide precise control of gases and all models are designed to comply with BS EN ISO 2503 and are manufact

From Plant process control

  Flashback arrestors (1st July 2007)

Murex Saffire flashback arrestors provide a high level of protection for the operator and his equipment in the event of a flashback caused by conditions such as sustained backfire, incorrect hose purging or simply the w

From Production engineering

  Welding pack (1st May 2007)

The Murex Transweld Challenger 400 welding package includes the Transweld Challenger 400 power source, Transmatic 4C wire feed units, 5m connection set and welding torch. The package is featured in free technical litera

From Production engineering

  Small and portable welder (1st March 2007)

The Murex Tradestig AC/DC 161iS welding power source is a small and portable, inverter based unit that provides 10A to 160A AC & DC TIG welding for bodyshops, repair and light fabrication applications.

Incorporating a powerf

From Production engineering

  Inverter-based welding power source (1st March 2007)

The Tradestig Dual 151i is an inverter-based, electronic controlled welding power source from Murex Welding Products.

It is said to offer high quality DC arc characteristics for TIG and MMA welding from both 110V and 230V su

From Production engineering

  For welding (1st January 2007)

For less complex welding tasks where quality is important, Murex Welding Products has introduced the Tradesmig 140-1.

Its built-in wire feeder and low weight (25kg) make it a practical solution for light fabricators, auto re

From Production engineering

  New seminar (1st July 2006)

With increasing use of the oxy-fuel gas process, Murex Welding Products now offers purposedesigned hazard awareness and risk assessment seminars.

From Health safety welfare

Versatile portable welding machines for TIG and MMA (22nd June 2006)

Murex says its Tradestig DC 150-1 and DC200-1 are versatile portable welding machines capable of welding most materials in thickness ranging from 0.5-6mm. They have IP23 protection and are capable of withstading the toughest of industrial and repair

From Newsletter Stories

  MIG composites (1st May 2006)

New literature from Murex Welding Products describes the company's single-phase, compact MIG/MAG power source with built-in wire feed systems.

From Production engineering

  Tig Welder (1st January 2006)

The new Transtig AC/DC 253iS from Murex Welding Products can carry out TIG or MMA welding operations in either AC or DC process modes, providing high performance levels -ptypically 250A TIG rating at 40% duty and 250A MMA rating at 35% duty.

From Production engineering

  Compact welding machines (1st November 2005)

The new Murex Transmig 300C and 350C step-controlled compact welding machines can be used for medium or heavy-duty applications MIG or MAG welding.

From Production engineering

  Outfits for all welding needs (1st July 2005)

Murex Welding Products offers welding and cutting outfits to suit all applications. Purpose designed, each is tailored to a particular market sector, ranging from heavy duty industrial to micro welding.

From Production engineering

  Powered unit (1st March 2005)

Multiflow powered respiratory systems from Murex comprise air filter unit, air hose and one of an approved range of head units.

From Health safety welfare

  Fast reacting (1st January 2005)

Murex Welding Products’ 9-13 Multiweld helmet has a reaction time of just 1/20 000 of a second and provides both full ultraviolet and infrared protection.

From Production engineering

  For all-round visibility (1st September 2004)

Available from Murex Welding Products, the Multiview welding helmet is designed to provide a high level of visual coverage and facial protection for the wearer.

From Production engineering

  Latest discs (1st July 2004)

A new range of grinding and cutting discs is available from Murex Welding Products. Features claimed include high safety levels, efficiency combined with fast cutting, long life and economic operation.

From Production engineering

  Welding poster (1st May 2004)

The cored wire range from Murex Welding Products is said to provide the fabricator with a selection of products for many applications at welding speeds up to three times faster than manual metal arc electrodes.

From Production engineering

  Welding literature (1st May 2004)

Literature is available from Murex Welding Products detailing the companys latest products for mig, tig, mma welders, as well as plasma cutting equipment.

From Production engineering

  Respirator guide (1st May 2004)

Selecting the most appropriate disposable face mask to provide protection when welding or metalworking can be difficult. One of the benefits of the partnership between Murex Welding Products and mask manufacturer 3M is a respirator performance guide

From Health safety welfare

  Free brochure (1st January 2004)

Personal protection products, welding tools and special process equipment are the three principal accessory ranges available from Murex Welding Products. They are included in a new 70 page Accessories catalogue that includes items such as helmets, cl

From Production engineering

  Grinding and cutting discs (1st November 2003)

Now available from Murex Welding Products is the new Rasta range of Murex branded abrasive cutting and grinding discs. The Swiss made product line includes: general purpose grinding discs for steel and grey cast metal; special discs for aluminium and

From Production engineering

  Weld quality (1st September 2003)

Heil Europe is a world leader in the design and manufacture of refuse collection vehicles. It makes the complete body from raw materials and considers welding and fabrication to be a core competence. To support this the company has invested in 25 Mur

From Production engineering