Home>Handbooks>Manufacturing Matters Ireland>Pushback system for storage
Home>Handling and Storing>Storage and containers>Pushback system for storage
ARTICLE

Pushback system for storage

13 June 2018

The new and highly versatile Pushback System from Safety Unlimited allows users to stack pallets containing any permutation of drums or IBCs within the same highly accessible, time and space saving unit.

Drums are four per pallet and IBCs two at a time across a total of 24 pallets two deep, on two levels. Operation is simple Place the first pallet on the Pushback cradle on the shelf, and push back the next pallet against the first one. When you take a pallet off of the shelf the next pallet glides forward. This is based on a safe, pallet rack system, including colour-coding of the internal structure to ensure correct placement. 

Each unit measures 8900 x 3200 x 3300mm (LxDxH) in any colour scheme and is made from 2.5mm profiled steel sheet over 50 x 50 x 3mm RHS tube. Units comply with the Control of Pollution (Oil Storage) (England) Regulations and current environmental and health and safety legislation, including Flame Arrested high and low ventilation.  

 There are padlockable sliding doors on one of the 8.9mm sides of the unit, plus a fully seam welded leak-proof anti corrosive sump over the entire base area to a depth of 220mm and capacity of 6000 litres. There's a galvanised roof and guttering and removable galvanised grid flooring – all finished in chemical/corrosion resistant paint.

 
OTHER ARTICLES IN THIS SECTION
FEATURED SUPPLIERS
 
TWITTER FEED