productEasy manual actuation system
The Torok manual actuation chuck from Hainbuch has now been developed to primarily be used on machine tools that operate without a clamping cylinder.
product
productExtruder rupture disc line
Elfab has launched its own extruder rupture disc range, primarily designed for over pressure protection of plastic extrusion processes. This pressure relief device not only provides protection for extrusion lines, it is one of Elfab’s widest range of pressure relief products, combining various dimensions, thread types and body configurations to customers requirements.
productStainless steel shaft accessories
Boston Gear has added new mounted bearing designs and universal joints to its line of stainless steel shaft accessories designed for high pressure food processing and packaging washdown applications.
productSupply continuity
Grundfos was approached by Center Parcs to supply a range of pump solutions to upgrade and maintain the continuity of the water supply at two existing facilities.
productUV systems optimised for food and beverage applications
Hanovia’s PureLine Ultraviolet Energy Optimised (UVEO) medium pressure UV system is reported to use up to 60% less power than conventional UV systems with just a single UV lamp. It delivers a consistent UV dose with reduced life cycle costs for food, beverage and brewing industries.
articleKeeping the beer flowing
As part of a project to extend its brewhouse, the Brauhaus Faust brewery in Miltenberg procured a new compressed air generation system and opted for a regulated-speed PureAir compressor from CompAir.
productStep-by-step guidance
Thomson Industries, a manufacturer of mechanical motion control solutions, demonstrates in its new educational Tech Tips video how to lubricate linear bearings and guides.
productCompact point-of-use dryers
The Atacama range of adsorption dryers from Hi-line Industries can be used as point-of-use dryers across a wide range of applications, wherever there is a localised demand for the supply of clean, dry compressed air.
productSafeguards sampling valves
Smith Flow Control has developed a new interlock for use with diaphragm valves in hygiene-critical applications such as the food and beverage sector.
productLeak-free for 10 years
PTFE seals needed to be replaced on a 6 to 12 month operating cycle at a Finnish manufacturer of process refractometers that was using process media at temperatures from -20 to +220°C and pressures from 0.7 to 25 bar. The seals were then replaced with Kalrez custom gaskets and there has been no fluid leakage over a 10 year period, even though the sealing products were subjected to permanent in-line fluids immersion.
Filter posts
IPE Newsletter
IPE publishes a weekly eNewsletter, delivering a carefully chosen selection of the latest stories straight to your inbox.
Subscribe here