PSP consists of software and the special ProNumeric XSL module, which facilitates highly-accurate time control and complex signal sequences. The control of the laser pulses is exactly synchronised with the motion of the machine. The effect: the energy from the laser is distributed absolutely evenly on the cut surface even at high machine speeds. 

There are several separating procedures in sheet machining: punching (also called shearing), plasma  cutting and laser cutting. The trend is towards lasers, and for good reason: the procedure guarantees more accurate and faster machining, even on complex contours or in places that are hard to access, in both two- and three-dimensions, and with superior cutting quality. 

A precondition for this, however, is optimum matching of the laser with the motion control, because the laser optics must either be moved over the material by servo axes, or the workpiece has to be moved along under the laser. The problem is that various components limit the motion guidance of the workpiece: the masses moved, the performance of the drive technology as well as the permitted machine and workpiece loads all require changes in the speed of guidance along the cutting track. These braking and accelerating procedures make steady, full-power laser work difficult. 

The problem is thus harmonising the intervals of the motion guidance and the laser through the control module. Schleicher Electronic has developed the special Pro Numeric XSL module to meet just these requirements; in association with the calculation software within the CNC, it links the motion data of the control with the requirements of the laser in real time. This PSS combination generates complex sampled signal sequences that control the laser highly accurately even at high machine speeds, and guarantee an even pulse sequence on surfaces. In this, PSP also considers the restrictions of laser-beam sources in order to prevent unauthorised overloads and thus excessive wear. One further benefit is that the PSP also supports complex multiple movements – and even robots can be integrated into the machining.