Single probe CO control

Lamtec’s LT3-F combustion analyser and KS1D combination 02/COe probe provides a failsafe solution for CO Control when used with a LAMTEC Burner Management Controller. The LT3-F uses two separate processors to cross-check the zirconia probe’s outputs.

CO Control takes a more empirical approach than Oxygen Trim enabling combustion systems to get closer to stoichiometric conditions, whilst remaining safe. A self-adapting algorithm optimises the fuel/air ratio over the entire firing range.

It ‘learns’ each point on the programmed combustion curve by reducing air to the point where CO is detected and then ‘backing-off’’ to a safe setpoint.