
![]() |
Edward Lowton
Editor |
![]() ![]() |
Home> | Production Engineering | >Lubrication | >Bonds quickly |
ARTICLE
Bonds quickly
25 January 2013
Available from Henkel, Loctite 3090 is a new two-part cyanoacrylate that increases the versatility of instant adhesives. In addition to benefits such as an initial bond in seconds, clear bondline, high strength and easy

Available from Henkel, Loctite 3090
is a new two-part cyanoacrylate that
increases the versatility of instant
adhesives. In addition to benefits
such as an initial bond in seconds,
clear bondline, high strength and
easy dispensing, it allows any exposed
adhesive remaining outside the joint
to harden within 2 to 4min, removing
the need for a post-assembly activator.
The new adhesive will bond close fitting parts in 20s - even where the gap is 3mm - and bonding is achieved in less than 90s. It can also be used where a more significant gap (up to 5mm) is involved.
Easy to apply, Loctite 3090 can be used on a variety of substrates and is capable of withstanding a force of some 20N/mm2.
The new adhesive will bond close fitting parts in 20s - even where the gap is 3mm - and bonding is achieved in less than 90s. It can also be used where a more significant gap (up to 5mm) is involved.
Easy to apply, Loctite 3090 can be used on a variety of substrates and is capable of withstanding a force of some 20N/mm2.
MORE FROM THIS COMPANY
- Low temperature cleaner/coater
- New packaging underpins brand security for Henkel LOCTITE products
- LOCTITE® products prove winners at racing snowmobile specialist Polaris
- Frozen food manufacturer accomplishes sustainable line conversion
- Approved for water
- Fast-curing resin
- Adhesives & dispensers
- HEALTH AND SAFETY ENGINEERING ADHESIVES
- Boosting the scope of shrink fits with engineering adhesives
- Workshop hand cleaner
OTHER ARTICLES IN THIS SECTION